# Makefile.in generated by automake 1.10.3 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = doc DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/in6addr.m4 $(top_srcdir)/m4/largefile.m4 \ $(top_srcdir)/m4/lcmessage.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/m4/sockaddrin6.m4 \ $(top_srcdir)/m4/sockinttypes.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(pkgdocdir)" pkgdocDATA_INSTALL = $(INSTALL_DATA) DATA = $(pkgdoc_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ EBCONF_EBINCS = @EBCONF_EBINCS@ EBCONF_EBLIBS = @EBCONF_EBLIBS@ EBCONF_INTLINCS = @EBCONF_INTLINCS@ EBCONF_INTLLIBS = @EBCONF_INTLLIBS@ EBCONF_ZLIBINCS = @EBCONF_ZLIBINCS@ EBCONF_ZLIBLIBS = @EBCONF_ZLIBLIBS@ EB_VERSION_MAJOR = @EB_VERSION_MAJOR@ EB_VERSION_MINOR = @EB_VERSION_MINOR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_EBNET = @ENABLE_EBNET@ ENABLE_LIBDEFLATE = @ENABLE_LIBDEFLATE@ ENABLE_NLS = @ENABLE_NLS@ ENABLE_PTHREAD = @ENABLE_PTHREAD@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ ICONVINCS = @ICONVINCS@ ICONVLIBS = @ICONVLIBS@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLINCS = @INTLINCS@ INTLLIBS = @INTLLIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBEB_VERSION_INFO = @LIBEB_VERSION_INFO@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAILING_ADDRESS = @MAILING_ADDRESS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OPENMP_CFLAGS = @OPENMP_CFLAGS@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ PTHREAD_CPPFLAGS = @PTHREAD_CPPFLAGS@ PTHREAD_LDFLAGS = @PTHREAD_LDFLAGS@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ ZLIBDEPS = @ZLIBDEPS@ ZLIBINCS = @ZLIBINCS@ ZLIBLIBS = @ZLIBLIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgdocdir = @pkgdocdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ pkgdoc_DATA = eb.html ebappendix.html ebfont.html ebinfo.html ebrefile.html \ ebstopcode.html ebzip.html EXTRA_DIST = eb.html.in ebappendix.html.in ebfont.html.in ebinfo.html.in \ ebrefile.html.in ebstopcode.html.in ebzip.html.in eb.css ebutils.css \ c2html html-include html-index html-split html-toc CLEANFILES = *.html all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-pkgdocDATA: $(pkgdoc_DATA) @$(NORMAL_INSTALL) test -z "$(pkgdocdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdocdir)" @list='$(pkgdoc_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(pkgdocDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdocdir)/$$f'"; \ $(pkgdocDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdocdir)/$$f"; \ done uninstall-pkgdocDATA: @$(NORMAL_UNINSTALL) @list='$(pkgdoc_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pkgdocdir)/$$f'"; \ rm -f "$(DESTDIR)$(pkgdocdir)/$$f"; \ done tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(pkgdocdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-pkgdocDATA @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-data-hook install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-pkgdocDATA @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) uninstall-hook .MAKE: install-am install-data-am install-strip uninstall-am .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-data-hook install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-pkgdocDATA install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am uninstall uninstall-am uninstall-hook \ uninstall-pkgdocDATA install-data-hook: for i in $(pkgdoc_DATA); do \ base="`echo $$i | sed -e 's/\.html//'`"; \ for j in $$base-[0-9][0-9].html; do \ test -r $$j || continue; \ echo " $(INSTALL_DATA) '$$j' '$(DESTDIR)$(pkgdocdir)/$$j'"; \ $(INSTALL_DATA) "$$j" "$(DESTDIR)$(pkgdocdir)/$$j"; \ done; \ done uninstall-hook: for i in $(pkgdoc_DATA); do \ base="`echo $$i | sed -e 's/\.html//'`"; \ rm -f "$(DESTDIR)$(pkgdocdir)"/$$base-*.html; \ done version.html: rm -f $@ echo $(VERSION) > version.html splitted: eb-splitted ebappendix-splitted ebfont-splitted ebinfo-splitted \ ebrefile-splitted ebstopcode-splitted ebzip-splitted eb.html: eb-cat.html rm -f $@ $(PERL) $(srcdir)/html-split -Z -p eb -w 2 eb-cat.html ebappendix.html: ebappendix-cat.html rm -f $@ $(PERL) $(srcdir)/html-split -Z -p ebappendix -w 2 ebappendix-cat.html ebfont.html: ebfont-cat.html rm -f $@ $(PERL) $(srcdir)/html-split -Z -p ebfont -w 2 ebfont-cat.html ebinfo.html: ebinfo-cat.html rm -f $@ $(PERL) $(srcdir)/html-split -Z -p ebinfo -w 2 ebinfo-cat.html ebrefile.html: ebrefile-cat.html rm -f $@ $(PERL) $(srcdir)/html-split -Z -p ebrefile -w 2 ebrefile-cat.html ebstopcode.html: ebstopcode-cat.html rm -f $@ $(PERL) $(srcdir)/html-split -Z -p ebstopcode -w 2 ebstopcode-cat.html ebzip.html: ebzip-cat.html rm -f $@ $(PERL) $(srcdir)/html-split -Z -p ebzip -w 2 ebzip-cat.html eb-cat.html: eb.html.in version.html eb-toc.html eb-sample-appendix.html \ eb-sample-booklist.html eb-sample-disctype.html eb-sample-font.html \ eb-sample-initexit.html eb-sample-subbook.html eb-sample-text.html \ eb-sample-word.html eb-index-type.html eb-index-func.html \ eb-index-const.html rm -f $@ $(PERL) $(srcdir)/html-include -o $@ $(srcdir)/eb.html.in ebappendix-cat.html: $(srcdir)/ebappendix.html.in version.html \ ebappendix-toc.html rm -f $@ $(PERL) $(srcdir)/html-include -o $@ $(srcdir)/ebappendix.html.in ebfont-cat.html: $(srcdir)/ebfont.html.in version.html ebfont-toc.html rm -f $@ $(PERL) $(srcdir)/html-include -o $@ $(srcdir)/ebfont.html.in ebinfo-cat.html: $(srcdir)/ebinfo.html.in version.html ebinfo-toc.html rm -f $@ $(PERL) $(srcdir)/html-include -o $@ $(srcdir)/ebinfo.html.in ebrefile-cat.html: $(srcdir)/ebrefile.html.in version.html ebrefile-toc.html rm -f $@ $(PERL) $(srcdir)/html-include -o $@ $(srcdir)/ebrefile.html.in ebstopcode-cat.html: $(srcdir)/ebstopcode.html.in version.html \ ebstopcode-toc.html rm -f $@ $(PERL) $(srcdir)/html-include -o $@ $(srcdir)/ebstopcode.html.in ebzip-cat.html: $(srcdir)/ebzip.html.in version.html ebzip-toc.html rm -f $@ $(PERL) $(srcdir)/html-include -o $@ $(srcdir)/ebzip.html.in eb-toc.html: $(srcdir)/eb.html.in rm -f $@ $(PERL) $(srcdir)/html-toc -m h2 -M h3 $(srcdir)/eb.html.in > $@ ebappendix-toc.html: $(srcdir)/ebappendix.html.in rm -f $@ $(PERL) $(srcdir)/html-toc -m h2 -M h3 $(srcdir)/ebappendix.html.in > $@ ebfont-toc.html: $(srcdir)/ebfont.html.in rm -f $@ $(PERL) $(srcdir)/html-toc -m h2 -M h3 $(srcdir)/ebfont.html.in > $@ ebinfo-toc.html: $(srcdir)/ebinfo.html.in rm -f $@ $(PERL) $(srcdir)/html-toc -m h2 -M h3 $(srcdir)/ebinfo.html.in > $@ ebrefile-toc.html: $(srcdir)/ebrefile.html.in rm -f $@ $(PERL) $(srcdir)/html-toc -m h2 -M h3 $(srcdir)/ebrefile.html.in > $@ ebstopcode-toc.html: $(srcdir)/ebstopcode.html.in rm -f $@ $(PERL) $(srcdir)/html-toc -m h2 -M h3 $(srcdir)/ebstopcode.html.in > $@ ebzip-toc.html: $(srcdir)/ebzip.html.in rm -f $@ $(PERL) $(srcdir)/html-toc -m h2 -M h3 $(srcdir)/ebzip.html.in > $@ eb-sample-appendix.html: $(top_srcdir)/samples/appendix.c rm -f $@ $(PERL) $(srcdir)/c2html $(top_srcdir)/samples/appendix.c > $@ eb-sample-booklist.html: $(top_srcdir)/samples/booklist.c rm -f $@ $(PERL) $(srcdir)/c2html $(top_srcdir)/samples/booklist.c > $@ eb-sample-disctype.html: $(top_srcdir)/samples/disctype.c rm -f $@ $(PERL) $(srcdir)/c2html $(top_srcdir)/samples/disctype.c > $@ eb-sample-font.html: $(top_srcdir)/samples/font.c rm -f $@ $(PERL) $(srcdir)/c2html $(top_srcdir)/samples/font.c > $@ eb-sample-initexit.html: $(top_srcdir)/samples/initexit.c rm -f $@ $(PERL) $(srcdir)/c2html $(top_srcdir)/samples/initexit.c > $@ eb-sample-subbook.html: $(top_srcdir)/samples/subbook.c rm -f $@ $(PERL) $(srcdir)/c2html $(top_srcdir)/samples/subbook.c > $@ eb-sample-text.html: $(top_srcdir)/samples/text.c rm -f $@ $(PERL) $(srcdir)/c2html $(top_srcdir)/samples/text.c > $@ eb-sample-word.html: $(top_srcdir)/samples/word.c rm -f $@ $(PERL) $(srcdir)/c2html $(top_srcdir)/samples/word.c > $@ eb-index-type.html eb-index-func.html eb-index-const.html: \ $(srcdir)/eb.html.in $(PERL) $(srcdir)/html-index -h -p eb-index $(srcdir)/eb.html.in # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: