Add ZIM format support (issue #267). Now turned on by default for Windows only. Under Linux/MacOS use "qmake "CONFIG+=zim_support"" (liblzma-dev package required. Or take xz 5.0.5 sources from http://tukaani.org/xz/ and compile it).

article-style.css

@@ -491,6 +491,14 @@ div.xdxf
   color: inherit;
 }
 
+/************* Zim dictionaries **************/
+
+.zimdict_headword
+{
+  font-weight: bold!important;
+/*  font-size: 150%; */
+}
+
 /************* Spelling suggestions *****************/
 
 .gdspellsuggestion

btreeidx.hh

@@ -74,8 +74,6 @@ public:
 
   BtreeIndex();
 
-protected:
-
   /// Opens the index. The file reference is saved to be used for
   /// subsequent lookups.
   /// The mutex is the one to be locked when working with the file.
@@ -85,6 +83,8 @@ protected:
   /// is performed.
   vector< WordArticleLink > findArticles( wstring const & );
 
+protected:
+
   /// Finds the offset in the btree leaf for the given word, either matching
   /// by an exact match, or by finding the smallest entry that might match
   /// by prefix. It can return zero if there isn't even a possible prefx

decompress.cc

@@ -2,6 +2,10 @@
 #include "zlib.h"
 #include "bzlib.h"
 
+#ifdef MAKE_ZIM_SUPPORT
+#include "lzma.h"
+#endif
+
 #define CHUNK_SIZE 2048
 
 QByteArray zlibDecompress( const char * bufptr, unsigned length )
@@ -74,3 +78,42 @@ int res;
     return str;
 }
 
+#ifdef MAKE_ZIM_SUPPORT
+
+#define BUFSIZE 0xFFFF
+
+string decompressLzma2( const char * bufptr, unsigned length )
+{
+string str;
+lzma_ret res;
+char buf[BUFSIZE];
+
+  lzma_stream strm = LZMA_STREAM_INIT;
+  strm.next_in = reinterpret_cast< const uint8_t * >( bufptr );
+  strm.avail_in = length;
+
+  while( 1 )
+  {
+    res = lzma_stream_decoder( &strm, UINT64_MAX, 0 );
+    if( res != LZMA_OK )
+      break;
+
+    while ( res != LZMA_STREAM_END )
+    {
+      strm.next_out = reinterpret_cast< uint8_t * >( buf );
+      strm.avail_out = BUFSIZE;
+      res = lzma_code( &strm, LZMA_RUN );
+      str.append( buf, BUFSIZE - strm.avail_out );
+      if( res != LZMA_OK && res != LZMA_STREAM_END )
+        break;
+    }
+    lzma_end( &strm );
+    if( res != LZMA_STREAM_END )
+      str.clear();
+
+    break;
+  }
+  return str;
+}
+
+#endif

decompress.hh

@@ -12,4 +12,10 @@ string decompressZlib( const char * bufptr, unsigned length );
 
 string decompressBzip2( const char * bufptr, unsigned length );
 
+#ifdef MAKE_ZIM_SUPPORT
+
+string decompressLzma2( const char * bufptr, unsigned length );
+
+#endif
+
 #endif // DECOMPRESS_HH

goldendict.pro

@@ -83,6 +83,8 @@ win32 {
     Release:DEFINES += NO_CONSOLE
 
     gcc48:QMAKE_CXXFLAGS += -Wno-unused-local-typedefs
+
+    CONFIG += zim_support
 }
 
 unix:!mac {
@@ -264,7 +266,8 @@ HEADERS += folding.hh \
     voiceengines.hh \
     ffmpegaudio.hh \
     articleinspector.hh \
-    delegate.hh
+    delegate.hh \
+    zim.hh
 
 FORMS += groups.ui \
     dictgroupwidget.ui \
@@ -373,7 +376,8 @@ SOURCES += folding.cc \
     voiceengines.cc \
     ffmpegaudio.cc \
     articleinspector.cc \
-    delegate.cc
+    delegate.cc \
+    zim.cc
 
 win32 {
 	FORMS   += texttospeechsource.ui
@@ -403,6 +407,11 @@ mac {
     SOURCES += texttospeechsource.cc
 }
 
+CONFIG( zim_support ) {
+  DEFINES += MAKE_ZIM_SUPPORT
+  LIBS += -llzma
+}
+
 RESOURCES += resources.qrc \
     flags.qrc
 TRANSLATIONS += locale/ru_RU.ts \

loaddictionaries.cc

@@ -27,6 +27,7 @@
 #include "aard.hh"
 #include "zipsounds.hh"
 #include "mdx.hh"
+#include "zim.hh"
 
 #include <QMessageBox>
 #include <QDir>
@@ -50,7 +51,11 @@ LoadDictionaries::LoadDictionaries( Config::Class const & cfg ):
   nameFilters << "*.bgl" << "*.ifo" << "*.lsa" << "*.dat"
               << "*.dsl" << "*.dsl.dz"  << "*.index" << "*.xdxf"
               << "*.xdxf.dz" << "*.dct" << "*.aar" << "*.zips"
-              << "*.mdx";
+              << "*.mdx"
+#ifdef MAKE_ZIM_SUPPORT
+              << "*.zim"
+#endif
+;
 }
 
 void LoadDictionaries::run()
@@ -185,6 +190,15 @@ void LoadDictionaries::handlePath( Config::Path const & path )
     dictionaries.insert( dictionaries.end(), mdxDictionaries.begin(),
                          mdxDictionaries.end() );
   }
+#ifdef MAKE_ZIM_SUPPORT
+  {
+    vector< sptr< Dictionary::Class > > zimDictionaries =
+      Zim::makeDictionaries( allFiles, FsEncoding::encode( Config::getIndexDir() ), *this );
+
+    dictionaries.insert( dictionaries.end(), zimDictionaries.begin(),
+                         zimDictionaries.end() );
+  }
+#endif
 }
 
 void LoadDictionaries::indexingDictionary( string const & dictionaryName ) throw()

resources.qrc

@@ -75,5 +75,6 @@
         <file>icons/programicon_old.png</file>
         <file>icons/playsound_color.png</file>
         <file>icons/playsound_full.png</file>
+        <file>icons/icon32_zim.png</file>
     </qresource>
 </RCC>

winlibs/include/lzma.h

@@ -0,0 +1,313 @@
+/**
+ * \file        api/lzma.h
+ * \brief       The public API of liblzma data compression library
+ *
+ * liblzma is a public domain general-purpose data compression library with
+ * a zlib-like API. The native file format is .xz, but also the old .lzma
+ * format and raw (no headers) streams are supported. Multiple compression
+ * algorithms (filters) are supported. Currently LZMA2 is the primary filter.
+ *
+ * liblzma is part of XZ Utils <http://tukaani.org/xz/>. XZ Utils includes
+ * a gzip-like command line tool named xz and some other tools. XZ Utils
+ * is developed and maintained by Lasse Collin.
+ *
+ * Major parts of liblzma are based on Igor Pavlov's public domain LZMA SDK
+ * <http://7-zip.org/sdk.html>.
+ *
+ * The SHA-256 implementation is based on the public domain code found from
+ * 7-Zip <http://7-zip.org/>, which has a modified version of the public
+ * domain SHA-256 code found from Crypto++ <http://www.cryptopp.com/>.
+ * The SHA-256 code in Crypto++ was written by Kevin Springle and Wei Dai.
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ */
+
+#ifndef LZMA_H
+#define LZMA_H
+
+/*****************************
+ * Required standard headers *
+ *****************************/
+
+/*
+ * liblzma API headers need some standard types and macros. To allow
+ * including lzma.h without requiring the application to include other
+ * headers first, lzma.h includes the required standard headers unless
+ * they already seem to be included already or if LZMA_MANUAL_HEADERS
+ * has been defined.
+ *
+ * Here's what types and macros are needed and from which headers:
+ *  - stddef.h: size_t, NULL
+ *  - stdint.h: uint8_t, uint32_t, uint64_t, UINT32_C(n), uint64_C(n),
+ *    UINT32_MAX, UINT64_MAX
+ *
+ * However, inttypes.h is a little more portable than stdint.h, although
+ * inttypes.h declares some unneeded things compared to plain stdint.h.
+ *
+ * The hacks below aren't perfect, specifically they assume that inttypes.h
+ * exists and that it typedefs at least uint8_t, uint32_t, and uint64_t,
+ * and that, in case of incomplete inttypes.h, unsigned int is 32-bit.
+ * If the application already takes care of setting up all the types and
+ * macros properly (for example by using gnulib's stdint.h or inttypes.h),
+ * we try to detect that the macros are already defined and don't include
+ * inttypes.h here again. However, you may define LZMA_MANUAL_HEADERS to
+ * force this file to never include any system headers.
+ *
+ * Some could argue that liblzma API should provide all the required types,
+ * for example lzma_uint64, LZMA_UINT64_C(n), and LZMA_UINT64_MAX. This was
+ * seen as an unnecessary mess, since most systems already provide all the
+ * necessary types and macros in the standard headers.
+ *
+ * Note that liblzma API still has lzma_bool, because using stdbool.h would
+ * break C89 and C++ programs on many systems. sizeof(bool) in C99 isn't
+ * necessarily the same as sizeof(bool) in C++.
+ */
+
+#ifndef LZMA_MANUAL_HEADERS
+	/*
+	 * I suppose this works portably also in C++. Note that in C++,
+	 * we need to get size_t into the global namespace.
+	 */
+#	include <stddef.h>
+
+	/*
+	 * Skip inttypes.h if we already have all the required macros. If we
+	 * have the macros, we assume that we have the matching typedefs too.
+	 */
+#	if !defined(UINT32_C) || !defined(UINT64_C) \
+			|| !defined(UINT32_MAX) || !defined(UINT64_MAX)
+		/*
+		 * MSVC has no C99 support, and thus it cannot be used to
+		 * compile liblzma. The liblzma API has to still be usable
+		 * from MSVC, so we need to define the required standard
+		 * integer types here.
+		 */
+#		if defined(_WIN32) && defined(_MSC_VER)
+			typedef unsigned __int8 uint8_t;
+			typedef unsigned __int32 uint32_t;
+			typedef unsigned __int64 uint64_t;
+#		else
+			/* Use the standard inttypes.h. */
+#			ifdef __cplusplus
+				/*
+				 * C99 sections 7.18.2 and 7.18.4 specify
+				 * that C++ implementations define the limit
+				 * and constant macros only if specifically
+				 * requested. Note that if you want the
+				 * format macros (PRIu64 etc.) too, you need
+				 * to define __STDC_FORMAT_MACROS before
+				 * including lzma.h, since re-including
+				 * inttypes.h with __STDC_FORMAT_MACROS
+				 * defined doesn't necessarily work.
+				 */
+#				ifndef __STDC_LIMIT_MACROS
+#					define __STDC_LIMIT_MACROS 1
+#				endif
+#				ifndef __STDC_CONSTANT_MACROS
+#					define __STDC_CONSTANT_MACROS 1
+#				endif
+#			endif
+
+#			include <inttypes.h>
+#		endif
+
+		/*
+		 * Some old systems have only the typedefs in inttypes.h, and
+		 * lack all the macros. For those systems, we need a few more
+		 * hacks. We assume that unsigned int is 32-bit and unsigned
+		 * long is either 32-bit or 64-bit. If these hacks aren't
+		 * enough, the application has to setup the types manually
+		 * before including lzma.h.
+		 */
+#		ifndef UINT32_C
+#			if defined(_WIN32) && defined(_MSC_VER)
+#				define UINT32_C(n) n ## UI32
+#			else
+#				define UINT32_C(n) n ## U
+#			endif
+#		endif
+
+#		ifndef UINT64_C
+#			if defined(_WIN32) && defined(_MSC_VER)
+#				define UINT64_C(n) n ## UI64
+#			else
+				/* Get ULONG_MAX. */
+#				include <limits.h>
+#				if ULONG_MAX == 4294967295UL
+#					define UINT64_C(n) n ## ULL
+#				else
+#					define UINT64_C(n) n ## UL
+#				endif
+#			endif
+#		endif
+
+#		ifndef UINT32_MAX
+#			define UINT32_MAX (UINT32_C(4294967295))
+#		endif
+
+#		ifndef UINT64_MAX
+#			define UINT64_MAX (UINT64_C(18446744073709551615))
+#		endif
+#	endif
+#endif /* ifdef LZMA_MANUAL_HEADERS */
+
+
+/******************
+ * LZMA_API macro *
+ ******************/
+
+/*
+ * Some systems require that the functions and function pointers are
+ * declared specially in the headers. LZMA_API_IMPORT is for importing
+ * symbols and LZMA_API_CALL is to specify the calling convention.
+ *
+ * By default it is assumed that the application will link dynamically
+ * against liblzma. #define LZMA_API_STATIC in your application if you
+ * want to link against static liblzma. If you don't care about portability
+ * to operating systems like Windows, or at least don't care about linking
+ * against static liblzma on them, don't worry about LZMA_API_STATIC. That
+ * is, most developers will never need to use LZMA_API_STATIC.
+ *
+ * The GCC variants are a special case on Windows (Cygwin and MinGW).
+ * We rely on GCC doing the right thing with its auto-import feature,
+ * and thus don't use __declspec(dllimport). This way developers don't
+ * need to worry about LZMA_API_STATIC. Also the calling convention is
+ * omitted on Cygwin but not on MinGW.
+ */
+#ifndef LZMA_API_IMPORT
+#	if !defined(LZMA_API_STATIC) && defined(_WIN32) && !defined(__GNUC__)
+#		define LZMA_API_IMPORT __declspec(dllimport)
+#	else
+#		define LZMA_API_IMPORT
+#	endif
+#endif
+
+#ifndef LZMA_API_CALL
+#	if defined(_WIN32) && !defined(__CYGWIN__)
+#		define LZMA_API_CALL __cdecl
+#	else
+#		define LZMA_API_CALL
+#	endif
+#endif
+
+#ifndef LZMA_API
+#	define LZMA_API(type) LZMA_API_IMPORT type LZMA_API_CALL
+#endif
+
+
+/***********
+ * nothrow *
+ ***********/
+
+/*
+ * None of the functions in liblzma may throw an exception. Even
+ * the functions that use callback functions won't throw exceptions,
+ * because liblzma would break if a callback function threw an exception.
+ */
+#ifndef lzma_nothrow
+#	if defined(__cplusplus)
+#		define lzma_nothrow throw()
+#	elif __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 3)
+#		define lzma_nothrow __attribute__((__nothrow__))
+#	else
+#		define lzma_nothrow
+#	endif
+#endif
+
+
+/********************
+ * GNU C extensions *
+ ********************/
+
+/*
+ * GNU C extensions are used conditionally in the public API. It doesn't
+ * break anything if these are sometimes enabled and sometimes not, only
+ * affects warnings and optimizations.
+ */
+#if __GNUC__ >= 3
+#	ifndef lzma_attribute
+#		define lzma_attribute(attr) __attribute__(attr)
+#	endif
+
+	/* warn_unused_result was added in GCC 3.4. */
+#	ifndef lzma_attr_warn_unused_result
+#		if __GNUC__ == 3 && __GNUC_MINOR__ < 4
+#			define lzma_attr_warn_unused_result
+#		endif
+#	endif
+
+#else
+#	ifndef lzma_attribute
+#		define lzma_attribute(attr)
+#	endif
+#endif
+
+
+#ifndef lzma_attr_pure
+#	define lzma_attr_pure lzma_attribute((__pure__))
+#endif
+
+#ifndef lzma_attr_const
+#	define lzma_attr_const lzma_attribute((__const__))
+#endif
+
+#ifndef lzma_attr_warn_unused_result
+#	define lzma_attr_warn_unused_result \
+		lzma_attribute((__warn_unused_result__))
+#endif
+
+
+/**************
+ * Subheaders *
+ **************/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Subheaders check that this is defined. It is to prevent including
+ * them directly from applications.
+ */
+#define LZMA_H_INTERNAL 1
+
+/* Basic features */
+#include "lzma/version.h"
+#include "lzma/base.h"
+#include "lzma/vli.h"
+#include "lzma/check.h"
+
+/* Filters */
+#include "lzma/filter.h"
+#include "lzma/bcj.h"
+#include "lzma/delta.h"
+#include "lzma/lzma.h"
+
+/* Container formats */
+#include "lzma/container.h"
+
+/* Advanced features */
+#include "lzma/stream_flags.h"
+#include "lzma/block.h"
+#include "lzma/index.h"
+#include "lzma/index_hash.h"
+
+/* Hardware information */
+#include "lzma/hardware.h"
+
+/*
+ * All subheaders included. Undefine LZMA_H_INTERNAL to prevent applications
+ * re-including the subheaders.
+ */
+#undef LZMA_H_INTERNAL
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ifndef LZMA_H */

winlibs/include/lzma/base.h

@@ -0,0 +1,601 @@
+/**
+ * \file        lzma/base.h
+ * \brief       Data types and functions used in many places in liblzma API
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/**
+ * \brief       Boolean
+ *
+ * This is here because C89 doesn't have stdbool.h. To set a value for
+ * variables having type lzma_bool, you can use
+ *   - C99's `true' and `false' from stdbool.h;
+ *   - C++'s internal `true' and `false'; or
+ *   - integers one (true) and zero (false).
+ */
+typedef unsigned char lzma_bool;
+
+
+/**
+ * \brief       Type of reserved enumeration variable in structures
+ *
+ * To avoid breaking library ABI when new features are added, several
+ * structures contain extra variables that may be used in future. Since
+ * sizeof(enum) can be different than sizeof(int), and sizeof(enum) may
+ * even vary depending on the range of enumeration constants, we specify
+ * a separate type to be used for reserved enumeration variables. All
+ * enumeration constants in liblzma API will be non-negative and less
+ * than 128, which should guarantee that the ABI won't break even when
+ * new constants are added to existing enumerations.
+ */
+typedef enum {
+	LZMA_RESERVED_ENUM      = 0
+} lzma_reserved_enum;
+
+
+/**
+ * \brief       Return values used by several functions in liblzma
+ *
+ * Check the descriptions of specific functions to find out which return
+ * values they can return. With some functions the return values may have
+ * more specific meanings than described here; those differences are
+ * described per-function basis.
+ */
+typedef enum {
+	LZMA_OK                 = 0,
+		/**<
+		 * \brief       Operation completed successfully
+		 */
+
+	LZMA_STREAM_END         = 1,
+		/**<
+		 * \brief       End of stream was reached
+		 *
+		 * In encoder, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, or
+		 * LZMA_FINISH was finished. In decoder, this indicates
+		 * that all the data was successfully decoded.
+		 *
+		 * In all cases, when LZMA_STREAM_END is returned, the last
+		 * output bytes should be picked from strm->next_out.
+		 */
+
+	LZMA_NO_CHECK           = 2,
+		/**<
+		 * \brief       Input stream has no integrity check
+		 *
+		 * This return value can be returned only if the
+		 * LZMA_TELL_NO_CHECK flag was used when initializing
+		 * the decoder. LZMA_NO_CHECK is just a warning, and
+		 * the decoding can be continued normally.
+		 *
+		 * It is possible to call lzma_get_check() immediately after
+		 * lzma_code has returned LZMA_NO_CHECK. The result will
+		 * naturally be LZMA_CHECK_NONE, but the possibility to call
+		 * lzma_get_check() may be convenient in some applications.
+		 */
+
+	LZMA_UNSUPPORTED_CHECK  = 3,
+		/**<
+		 * \brief       Cannot calculate the integrity check
+		 *
+		 * The usage of this return value is different in encoders
+		 * and decoders.
+		 *
+		 * Encoders can return this value only from the initialization
+		 * function. If initialization fails with this value, the
+		 * encoding cannot be done, because there's no way to produce
+		 * output with the correct integrity check.
+		 *
+		 * Decoders can return this value only from lzma_code() and
+		 * only if the LZMA_TELL_UNSUPPORTED_CHECK flag was used when
+		 * initializing the decoder. The decoding can still be
+		 * continued normally even if the check type is unsupported,
+		 * but naturally the check will not be validated, and possible
+		 * errors may go undetected.
+		 *
+		 * With decoder, it is possible to call lzma_get_check()
+		 * immediately after lzma_code() has returned
+		 * LZMA_UNSUPPORTED_CHECK. This way it is possible to find
+		 * out what the unsupported Check ID was.
+		 */
+
+	LZMA_GET_CHECK          = 4,
+		/**<
+		 * \brief       Integrity check type is now available
+		 *
+		 * This value can be returned only by the lzma_code() function
+		 * and only if the decoder was initialized with the
+		 * LZMA_TELL_ANY_CHECK flag. LZMA_GET_CHECK tells the
+		 * application that it may now call lzma_get_check() to find
+		 * out the Check ID. This can be used, for example, to
+		 * implement a decoder that accepts only files that have
+		 * strong enough integrity check.
+		 */
+
+	LZMA_MEM_ERROR          = 5,
+		/**<
+		 * \brief       Cannot allocate memory
+		 *
+		 * Memory allocation failed, or the size of the allocation
+		 * would be greater than SIZE_MAX.
+		 *
+		 * Due to internal implementation reasons, the coding cannot
+		 * be continued even if more memory were made available after
+		 * LZMA_MEM_ERROR.
+		 */
+
+	LZMA_MEMLIMIT_ERROR     = 6,
+		/**
+		 * \brief       Memory usage limit was reached
+		 *
+		 * Decoder would need more memory than allowed by the
+		 * specified memory usage limit. To continue decoding,
+		 * the memory usage limit has to be increased with
+		 * lzma_memlimit_set().
+		 */
+
+	LZMA_FORMAT_ERROR       = 7,
+		/**<
+		 * \brief       File format not recognized
+		 *
+		 * The decoder did not recognize the input as supported file
+		 * format. This error can occur, for example, when trying to
+		 * decode .lzma format file with lzma_stream_decoder,
+		 * because lzma_stream_decoder accepts only the .xz format.
+		 */
+
+	LZMA_OPTIONS_ERROR      = 8,
+		/**<
+		 * \brief       Invalid or unsupported options
+		 *
+		 * Invalid or unsupported options, for example
+		 *  - unsupported filter(s) or filter options; or
+		 *  - reserved bits set in headers (decoder only).
+		 *
+		 * Rebuilding liblzma with more features enabled, or
+		 * upgrading to a newer version of liblzma may help.
+		 */
+
+	LZMA_DATA_ERROR         = 9,
+		/**<
+		 * \brief       Data is corrupt
+		 *
+		 * The usage of this return value is different in encoders
+		 * and decoders. In both encoder and decoder, the coding
+		 * cannot continue after this error.
+		 *
+		 * Encoders return this if size limits of the target file
+		 * format would be exceeded. These limits are huge, thus
+		 * getting this error from an encoder is mostly theoretical.
+		 * For example, the maximum compressed and uncompressed
+		 * size of a .xz Stream is roughly 8 EiB (2^63 bytes).
+		 *
+		 * Decoders return this error if the input data is corrupt.
+		 * This can mean, for example, invalid CRC32 in headers
+		 * or invalid check of uncompressed data.
+		 */
+
+	LZMA_BUF_ERROR          = 10,
+		/**<
+		 * \brief       No progress is possible
+		 *
+		 * This error code is returned when the coder cannot consume
+		 * any new input and produce any new output. The most common
+		 * reason for this error is that the input stream being
+		 * decoded is truncated or corrupt.
+		 *
+		 * This error is not fatal. Coding can be continued normally
+		 * by providing more input and/or more output space, if
+		 * possible.
+		 *
+		 * Typically the first call to lzma_code() that can do no
+		 * progress returns LZMA_OK instead of LZMA_BUF_ERROR. Only
+		 * the second consecutive call doing no progress will return
+		 * LZMA_BUF_ERROR. This is intentional.
+		 *
+		 * With zlib, Z_BUF_ERROR may be returned even if the
+		 * application is doing nothing wrong, so apps will need
+		 * to handle Z_BUF_ERROR specially. The above hack
+		 * guarantees that liblzma never returns LZMA_BUF_ERROR
+		 * to properly written applications unless the input file
+		 * is truncated or corrupt. This should simplify the
+		 * applications a little.
+		 */
+
+	LZMA_PROG_ERROR         = 11,
+		/**<
+		 * \brief       Programming error
+		 *
+		 * This indicates that the arguments given to the function are
+		 * invalid or the internal state of the decoder is corrupt.
+		 *   - Function arguments are invalid or the structures
+		 *     pointed by the argument pointers are invalid
+		 *     e.g. if strm->next_out has been set to NULL and
+		 *     strm->avail_out > 0 when calling lzma_code().
+		 *   - lzma_* functions have been called in wrong order
+		 *     e.g. lzma_code() was called right after lzma_end().
+		 *   - If errors occur randomly, the reason might be flaky
+		 *     hardware.
+		 *
+		 * If you think that your code is correct, this error code
+		 * can be a sign of a bug in liblzma. See the documentation
+		 * how to report bugs.
+		 */
+} lzma_ret;
+
+
+/**
+ * \brief       The `action' argument for lzma_code()
+ *
+ * After the first use of LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, or LZMA_FINISH,
+ * the same `action' must is used until lzma_code() returns LZMA_STREAM_END.
+ * Also, the amount of input (that is, strm->avail_in) must not be modified
+ * by the application until lzma_code() returns LZMA_STREAM_END. Changing the
+ * `action' or modifying the amount of input will make lzma_code() return
+ * LZMA_PROG_ERROR.
+ */
+typedef enum {
+	LZMA_RUN = 0,
+		/**<
+		 * \brief       Continue coding
+		 *
+		 * Encoder: Encode as much input as possible. Some internal
+		 * buffering will probably be done (depends on the filter
+		 * chain in use), which causes latency: the input used won't
+		 * usually be decodeable from the output of the same
+		 * lzma_code() call.
+		 *
+		 * Decoder: Decode as much input as possible and produce as
+		 * much output as possible.
+		 */
+
+	LZMA_SYNC_FLUSH = 1,
+		/**<
+		 * \brief       Make all the input available at output
+		 *
+		 * Normally the encoder introduces some latency.
+		 * LZMA_SYNC_FLUSH forces all the buffered data to be
+		 * available at output without resetting the internal
+		 * state of the encoder. This way it is possible to use
+		 * compressed stream for example for communication over
+		 * network.
+		 *
+		 * Only some filters support LZMA_SYNC_FLUSH. Trying to use
+		 * LZMA_SYNC_FLUSH with filters that don't support it will
+		 * make lzma_code() return LZMA_OPTIONS_ERROR. For example,
+		 * LZMA1 doesn't support LZMA_SYNC_FLUSH but LZMA2 does.
+		 *
+		 * Using LZMA_SYNC_FLUSH very often can dramatically reduce
+		 * the compression ratio. With some filters (for example,
+		 * LZMA2), fine-tuning the compression options may help
+		 * mitigate this problem significantly (for example,
+		 * match finder with LZMA2).
+		 *
+		 * Decoders don't support LZMA_SYNC_FLUSH.
+		 */
+
+	LZMA_FULL_FLUSH = 2,
+		/**<
+		 * \brief       Finish encoding of the current Block
+		 *
+		 * All the input data going to the current Block must have
+		 * been given to the encoder (the last bytes can still be
+		 * pending in* next_in). Call lzma_code() with LZMA_FULL_FLUSH
+		 * until it returns LZMA_STREAM_END. Then continue normally
+		 * with LZMA_RUN or finish the Stream with LZMA_FINISH.
+		 *
+		 * This action is currently supported only by Stream encoder
+		 * and easy encoder (which uses Stream encoder). If there is
+		 * no unfinished Block, no empty Block is created.
+		 */
+
+	LZMA_FINISH = 3
+		/**<
+		 * \brief       Finish the coding operation
+		 *
+		 * All the input data must have been given to the encoder
+		 * (the last bytes can still be pending in next_in).
+		 * Call lzma_code() with LZMA_FINISH until it returns
+		 * LZMA_STREAM_END. Once LZMA_FINISH has been used,
+		 * the amount of input must no longer be changed by
+		 * the application.
+		 *
+		 * When decoding, using LZMA_FINISH is optional unless the
+		 * LZMA_CONCATENATED flag was used when the decoder was
+		 * initialized. When LZMA_CONCATENATED was not used, the only
+		 * effect of LZMA_FINISH is that the amount of input must not
+		 * be changed just like in the encoder.
+		 */
+} lzma_action;
+
+
+/**
+ * \brief       Custom functions for memory handling
+ *
+ * A pointer to lzma_allocator may be passed via lzma_stream structure
+ * to liblzma, and some advanced functions take a pointer to lzma_allocator
+ * as a separate function argument. The library will use the functions
+ * specified in lzma_allocator for memory handling instead of the default
+ * malloc() and free(). C++ users should note that the custom memory
+ * handling functions must not throw exceptions.
+ *
+ * liblzma doesn't make an internal copy of lzma_allocator. Thus, it is
+ * OK to change these function pointers in the middle of the coding
+ * process, but obviously it must be done carefully to make sure that the
+ * replacement `free' can deallocate memory allocated by the earlier
+ * `alloc' function(s).
+ */
+typedef struct {
+	/**
+	 * \brief       Pointer to a custom memory allocation function
+	 *
+	 * If you don't want a custom allocator, but still want
+	 * custom free(), set this to NULL and liblzma will use
+	 * the standard malloc().
+	 *
+	 * \param       opaque  lzma_allocator.opaque (see below)
+	 * \param       nmemb   Number of elements like in calloc(). liblzma
+	 *                      will always set nmemb to 1, so it is safe to
+	 *                      ignore nmemb in a custom allocator if you like.
+	 *                      The nmemb argument exists only for
+	 *                      compatibility with zlib and libbzip2.
+	 * \param       size    Size of an element in bytes.
+	 *                      liblzma never sets this to zero.
+	 *
+	 * \return      Pointer to the beginning of a memory block of
+	 *              `size' bytes, or NULL if allocation fails
+	 *              for some reason. When allocation fails, functions
+	 *              of liblzma return LZMA_MEM_ERROR.
+	 *
+	 * The allocator should not waste time zeroing the allocated buffers.
+	 * This is not only about speed, but also memory usage, since the
+	 * operating system kernel doesn't necessarily allocate the requested
+	 * memory in physical memory until it is actually used. With small
+	 * input files, liblzma may actually need only a fraction of the
+	 * memory that it requested for allocation.
+	 *
+	 * \note        LZMA_MEM_ERROR is also used when the size of the
+	 *              allocation would be greater than SIZE_MAX. Thus,
+	 *              don't assume that the custom allocator must have
+	 *              returned NULL if some function from liblzma
+	 *              returns LZMA_MEM_ERROR.
+	 */
+	void *(LZMA_API_CALL *alloc)(void *opaque, size_t nmemb, size_t size);
+
+	/**
+	 * \brief       Pointer to a custom memory freeing function
+	 *
+	 * If you don't want a custom freeing function, but still
+	 * want a custom allocator, set this to NULL and liblzma
+	 * will use the standard free().
+	 *
+	 * \param       opaque  lzma_allocator.opaque (see below)
+	 * \param       ptr     Pointer returned by lzma_allocator.alloc(),
+	 *                      or when it is set to NULL, a pointer returned
+	 *                      by the standard malloc().
+	 */
+	void (LZMA_API_CALL *free)(void *opaque, void *ptr);
+
+	/**
+	 * \brief       Pointer passed to .alloc() and .free()
+	 *
+	 * opaque is passed as the first argument to lzma_allocator.alloc()
+	 * and lzma_allocator.free(). This intended to ease implementing
+	 * custom memory allocation functions for use with liblzma.
+	 *
+	 * If you don't need this, you should set this to NULL.
+	 */
+	void *opaque;
+
+} lzma_allocator;
+
+
+/**
+ * \brief       Internal data structure
+ *
+ * The contents of this structure is not visible outside the library.
+ */
+typedef struct lzma_internal_s lzma_internal;
+
+
+/**
+ * \brief       Passing data to and from liblzma
+ *
+ * The lzma_stream structure is used for
+ *  - passing pointers to input and output buffers to liblzma;
+ *  - defining custom memory hander functions; and
+ *  - holding a pointer to coder-specific internal data structures.
+ *
+ * Typical usage:
+ *
+ *  - After allocating lzma_stream (on stack or with malloc()), it must be
+ *    initialized to LZMA_STREAM_INIT (see LZMA_STREAM_INIT for details).
+ *
+ *  - Initialize a coder to the lzma_stream, for example by using
+ *    lzma_easy_encoder() or lzma_auto_decoder(). Some notes:
+ *      - In contrast to zlib, strm->next_in and strm->next_out are
+ *        ignored by all initialization functions, thus it is safe
+ *        to not initialize them yet.
+ *      - The initialization functions always set strm->total_in and
+ *        strm->total_out to zero.
+ *      - If the initialization function fails, no memory is left allocated
+ *        that would require freeing with lzma_end() even if some memory was
+ *        associated with the lzma_stream structure when the initialization
+ *        function was called.
+ *
+ *  - Use lzma_code() to do the actual work.
+ *
+ *  - Once the coding has been finished, the existing lzma_stream can be
+ *    reused. It is OK to reuse lzma_stream with different initialization
+ *    function without calling lzma_end() first. Old allocations are
+ *    automatically freed.
+ *
+ *  - Finally, use lzma_end() to free the allocated memory. lzma_end() never
+ *    frees the lzma_stream structure itself.
+ *
+ * Application may modify the values of total_in and total_out as it wants.
+ * They are updated by liblzma to match the amount of data read and
+ * written, but aren't used for anything else.
+ */
+typedef struct {
+	const uint8_t *next_in; /**< Pointer to the next input byte. */
+	size_t avail_in;    /**< Number of available input bytes in next_in. */
+	uint64_t total_in;  /**< Total number of bytes read by liblzma. */
+
+	uint8_t *next_out;  /**< Pointer to the next output position. */
+	size_t avail_out;   /**< Amount of free space in next_out. */
+	uint64_t total_out; /**< Total number of bytes written by liblzma. */
+
+	/**
+	 * \brief       Custom memory allocation functions
+	 *
+	 * In most cases this is NULL which makes liblzma use
+	 * the standard malloc() and free().
+	 */
+	lzma_allocator *allocator;
+
+	/** Internal state is not visible to applications. */
+	lzma_internal *internal;
+
+	/*
+	 * Reserved space to allow possible future extensions without
+	 * breaking the ABI. Excluding the initialization of this structure,
+	 * you should not touch these, because the names of these variables
+	 * may change.
+	 */
+	void *reserved_ptr1;
+	void *reserved_ptr2;
+	void *reserved_ptr3;
+	void *reserved_ptr4;
+	uint64_t reserved_int1;
+	uint64_t reserved_int2;
+	size_t reserved_int3;
+	size_t reserved_int4;
+	lzma_reserved_enum reserved_enum1;
+	lzma_reserved_enum reserved_enum2;
+
+} lzma_stream;
+
+
+/**
+ * \brief       Initialization for lzma_stream
+ *
+ * When you declare an instance of lzma_stream, you can immediately
+ * initialize it so that initialization functions know that no memory
+ * has been allocated yet:
+ *
+ *     lzma_stream strm = LZMA_STREAM_INIT;
+ *
+ * If you need to initialize a dynamically allocated lzma_stream, you can use
+ * memset(strm_pointer, 0, sizeof(lzma_stream)). Strictly speaking, this
+ * violates the C standard since NULL may have different internal
+ * representation than zero, but it should be portable enough in practice.
+ * Anyway, for maximum portability, you can use something like this:
+ *
+ *     lzma_stream tmp = LZMA_STREAM_INIT;
+ *     *strm = tmp;
+ */
+#define LZMA_STREAM_INIT \
+	{ NULL, 0, 0, NULL, 0, 0, NULL, NULL, \
+	NULL, NULL, NULL, NULL, 0, 0, 0, 0, \
+	LZMA_RESERVED_ENUM, LZMA_RESERVED_ENUM }
+
+
+/**
+ * \brief       Encode or decode data
+ *
+ * Once the lzma_stream has been successfully initialized (e.g. with
+ * lzma_stream_encoder()), the actual encoding or decoding is done
+ * using this function. The application has to update strm->next_in,
+ * strm->avail_in, strm->next_out, and strm->avail_out to pass input
+ * to and get output from liblzma.
+ *
+ * See the description of the coder-specific initialization function to find
+ * out what `action' values are supported by the coder.
+ */
+extern LZMA_API(lzma_ret) lzma_code(lzma_stream *strm, lzma_action action)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Free memory allocated for the coder data structures
+ *
+ * \param       strm    Pointer to lzma_stream that is at least initialized
+ *                      with LZMA_STREAM_INIT.
+ *
+ * After lzma_end(strm), strm->internal is guaranteed to be NULL. No other
+ * members of the lzma_stream structure are touched.
+ *
+ * \note        zlib indicates an error if application end()s unfinished
+ *              stream structure. liblzma doesn't do this, and assumes that
+ *              application knows what it is doing.
+ */
+extern LZMA_API(void) lzma_end(lzma_stream *strm) lzma_nothrow;
+
+
+/**
+ * \brief       Get the memory usage of decoder filter chain
+ *
+ * This function is currently supported only when *strm has been initialized
+ * with a function that takes a memlimit argument. With other functions, you
+ * should use e.g. lzma_raw_encoder_memusage() or lzma_raw_decoder_memusage()
+ * to estimate the memory requirements.
+ *
+ * This function is useful e.g. after LZMA_MEMLIMIT_ERROR to find out how big
+ * the memory usage limit should have been to decode the input. Note that
+ * this may give misleading information if decoding .xz Streams that have
+ * multiple Blocks, because each Block can have different memory requirements.
+ *
+ * \return      How much memory is currently allocated for the filter
+ *              decoders. If no filter chain is currently allocated,
+ *              some non-zero value is still returned, which is less than
+ *              or equal to what any filter chain would indicate as its
+ *              memory requirement.
+ *
+ *              If this function isn't supported by *strm or some other error
+ *              occurs, zero is returned.
+ */
+extern LZMA_API(uint64_t) lzma_memusage(const lzma_stream *strm)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Get the current memory usage limit
+ *
+ * This function is supported only when *strm has been initialized with
+ * a function that takes a memlimit argument.
+ *
+ * \return      On success, the current memory usage limit is returned
+ *              (always non-zero). On error, zero is returned.
+ */
+extern LZMA_API(uint64_t) lzma_memlimit_get(const lzma_stream *strm)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Set the memory usage limit
+ *
+ * This function is supported only when *strm has been initialized with
+ * a function that takes a memlimit argument.
+ *
+ * \return      - LZMA_OK: New memory usage limit successfully set.
+ *              - LZMA_MEMLIMIT_ERROR: The new limit is too small.
+ *                The limit was not changed.
+ *              - LZMA_PROG_ERROR: Invalid arguments, e.g. *strm doesn't
+ *                support memory usage limit or memlimit was zero.
+ */
+extern LZMA_API(lzma_ret) lzma_memlimit_set(
+		lzma_stream *strm, uint64_t memlimit) lzma_nothrow;

winlibs/include/lzma/bcj.h

@@ -0,0 +1,90 @@
+/**
+ * \file        lzma/bcj.h
+ * \brief       Branch/Call/Jump conversion filters
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/* Filter IDs for lzma_filter.id */
+
+#define LZMA_FILTER_X86         LZMA_VLI_C(0x04)
+	/**<
+	 * Filter for x86 binaries
+	 */
+
+#define LZMA_FILTER_POWERPC     LZMA_VLI_C(0x05)
+	/**<
+	 * Filter for Big endian PowerPC binaries
+	 */
+
+#define LZMA_FILTER_IA64        LZMA_VLI_C(0x06)
+	/**<
+	 * Filter for IA-64 (Itanium) binaries.
+	 */
+
+#define LZMA_FILTER_ARM         LZMA_VLI_C(0x07)
+	/**<
+	 * Filter for ARM binaries.
+	 */
+
+#define LZMA_FILTER_ARMTHUMB    LZMA_VLI_C(0x08)
+	/**<
+	 * Filter for ARM-Thumb binaries.
+	 */
+
+#define LZMA_FILTER_SPARC       LZMA_VLI_C(0x09)
+	/**<
+	 * Filter for SPARC binaries.
+	 */
+
+
+/**
+ * \brief       Options for BCJ filters
+ *
+ * The BCJ filters never change the size of the data. Specifying options
+ * for them is optional: if pointer to options is NULL, default value is
+ * used. You probably never need to specify options to BCJ filters, so just
+ * set the options pointer to NULL and be happy.
+ *
+ * If options with non-default values have been specified when encoding,
+ * the same options must also be specified when decoding.
+ *
+ * \note        At the moment, none of the BCJ filters support
+ *              LZMA_SYNC_FLUSH. If LZMA_SYNC_FLUSH is specified,
+ *              LZMA_OPTIONS_ERROR will be returned. If there is need,
+ *              partial support for LZMA_SYNC_FLUSH can be added in future.
+ *              Partial means that flushing would be possible only at
+ *              offsets that are multiple of 2, 4, or 16 depending on
+ *              the filter, except x86 which cannot be made to support
+ *              LZMA_SYNC_FLUSH predictably.
+ */
+typedef struct {
+	/**
+	 * \brief       Start offset for conversions
+	 *
+	 * This setting is useful only when the same filter is used
+	 * _separately_ for multiple sections of the same executable file,
+	 * and the sections contain cross-section branch/call/jump
+	 * instructions. In that case it is beneficial to set the start
+	 * offset of the non-first sections so that the relative addresses
+	 * of the cross-section branch/call/jump instructions will use the
+	 * same absolute addresses as in the first section.
+	 *
+	 * When the pointer to options is NULL, the default value (zero)
+	 * is used.
+	 */
+	uint32_t start_offset;
+
+} lzma_options_bcj;

winlibs/include/lzma/block.h

@@ -0,0 +1,530 @@
+/**
+ * \file        lzma/block.h
+ * \brief       .xz Block handling
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/**
+ * \brief       Options for the Block and Block Header encoders and decoders
+ *
+ * Different Block handling functions use different parts of this structure.
+ * Some read some members, other functions write, and some do both. Only the
+ * members listed for reading need to be initialized when the specified
+ * functions are called. The members marked for writing will be assigned
+ * new values at some point either by calling the given function or by
+ * later calls to lzma_code().
+ */
+typedef struct {
+	/**
+	 * \brief       Block format version
+	 *
+	 * To prevent API and ABI breakages if new features are needed in
+	 * the Block field, a version number is used to indicate which
+	 * fields in this structure are in use. For now, version must always
+	 * be zero. With non-zero version, most Block related functions will
+	 * return LZMA_OPTIONS_ERROR.
+	 *
+	 * Read by:
+	 *  - All functions that take pointer to lzma_block as argument,
+	 *    including lzma_block_header_decode().
+	 *
+	 * Written by:
+	 *  - lzma_block_header_decode()
+	 */
+	uint32_t version;
+
+	/**
+	 * \brief       Size of the Block Header field
+	 *
+	 * This is always a multiple of four.
+	 *
+	 * Read by:
+	 *  - lzma_block_header_encode()
+	 *  - lzma_block_header_decode()
+	 *  - lzma_block_compressed_size()
+	 *  - lzma_block_unpadded_size()
+	 *  - lzma_block_total_size()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_decode()
+	 *
+	 * Written by:
+	 *  - lzma_block_header_size()
+	 *  - lzma_block_buffer_encode()
+	 */
+	uint32_t header_size;
+#	define LZMA_BLOCK_HEADER_SIZE_MIN 8
+#	define LZMA_BLOCK_HEADER_SIZE_MAX 1024
+
+	/**
+	 * \brief       Type of integrity Check
+	 *
+	 * The Check ID is not stored into the Block Header, thus its value
+	 * must be provided also when decoding.
+	 *
+	 * Read by:
+	 *  - lzma_block_header_encode()
+	 *  - lzma_block_header_decode()
+	 *  - lzma_block_compressed_size()
+	 *  - lzma_block_unpadded_size()
+	 *  - lzma_block_total_size()
+	 *  - lzma_block_encoder()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_encode()
+	 *  - lzma_block_buffer_decode()
+	 */
+	lzma_check check;
+
+	/**
+	 * \brief       Size of the Compressed Data in bytes
+	 *
+	 * Encoding: If this is not LZMA_VLI_UNKNOWN, Block Header encoder
+	 * will store this value to the Block Header. Block encoder doesn't
+	 * care about this value, but will set it once the encoding has been
+	 * finished.
+	 *
+	 * Decoding: If this is not LZMA_VLI_UNKNOWN, Block decoder will
+	 * verify that the size of the Compressed Data field matches
+	 * compressed_size.
+	 *
+	 * Usually you don't know this value when encoding in streamed mode,
+	 * and thus cannot write this field into the Block Header.
+	 *
+	 * In non-streamed mode you can reserve space for this field before
+	 * encoding the actual Block. After encoding the data, finish the
+	 * Block by encoding the Block Header. Steps in detail:
+	 *
+	 *  - Set compressed_size to some big enough value. If you don't know
+	 *    better, use LZMA_VLI_MAX, but remember that bigger values take
+	 *    more space in Block Header.
+	 *
+	 *  - Call lzma_block_header_size() to see how much space you need to
+	 *    reserve for the Block Header.
+	 *
+	 *  - Encode the Block using lzma_block_encoder() and lzma_code().
+	 *    It sets compressed_size to the correct value.
+	 *
+	 *  - Use lzma_block_header_encode() to encode the Block Header.
+	 *    Because space was reserved in the first step, you don't need
+	 *    to call lzma_block_header_size() anymore, because due to
+	 *    reserving, header_size has to be big enough. If it is "too big",
+	 *    lzma_block_header_encode() will add enough Header Padding to
+	 *    make Block Header to match the size specified by header_size.
+	 *
+	 * Read by:
+	 *  - lzma_block_header_size()
+	 *  - lzma_block_header_encode()
+	 *  - lzma_block_compressed_size()
+	 *  - lzma_block_unpadded_size()
+	 *  - lzma_block_total_size()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_decode()
+	 *
+	 * Written by:
+	 *  - lzma_block_header_decode()
+	 *  - lzma_block_compressed_size()
+	 *  - lzma_block_encoder()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_encode()
+	 *  - lzma_block_buffer_decode()
+	 */
+	lzma_vli compressed_size;
+
+	/**
+	 * \brief       Uncompressed Size in bytes
+	 *
+	 * This is handled very similarly to compressed_size above.
+	 *
+	 * uncompressed_size is needed by fewer functions than
+	 * compressed_size. This is because uncompressed_size isn't
+	 * needed to validate that Block stays within proper limits.
+	 *
+	 * Read by:
+	 *  - lzma_block_header_size()
+	 *  - lzma_block_header_encode()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_decode()
+	 *
+	 * Written by:
+	 *  - lzma_block_header_decode()
+	 *  - lzma_block_encoder()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_encode()
+	 *  - lzma_block_buffer_decode()
+	 */
+	lzma_vli uncompressed_size;
+
+	/**
+	 * \brief       Array of filters
+	 *
+	 * There can be 1-4 filters. The end of the array is marked with
+	 * .id = LZMA_VLI_UNKNOWN.
+	 *
+	 * Read by:
+	 *  - lzma_block_header_size()
+	 *  - lzma_block_header_encode()
+	 *  - lzma_block_encoder()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_encode()
+	 *  - lzma_block_buffer_decode()
+	 *
+	 * Written by:
+	 *  - lzma_block_header_decode(): Note that this does NOT free()
+	 *    the old filter options structures. All unused filters[] will
+	 *    have .id == LZMA_VLI_UNKNOWN and .options == NULL. If
+	 *    decoding fails, all filters[] are guaranteed to be
+	 *    LZMA_VLI_UNKNOWN and NULL.
+	 *
+	 * \note        Because of the array is terminated with
+	 *              .id = LZMA_VLI_UNKNOWN, the actual array must
+	 *              have LZMA_FILTERS_MAX + 1 members or the Block
+	 *              Header decoder will overflow the buffer.
+	 */
+	lzma_filter *filters;
+
+	/**
+	 * \brief       Raw value stored in the Check field
+	 *
+	 * After successful coding, the first lzma_check_size(check) bytes
+	 * of this array contain the raw value stored in the Check field.
+	 *
+	 * Note that CRC32 and CRC64 are stored in little endian byte order.
+	 * Take it into account if you display the Check values to the user.
+	 *
+	 * Written by:
+	 *  - lzma_block_encoder()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_encode()
+	 *  - lzma_block_buffer_decode()
+	 */
+	uint8_t raw_check[LZMA_CHECK_SIZE_MAX];
+
+	/*
+	 * Reserved space to allow possible future extensions without
+	 * breaking the ABI. You should not touch these, because the names
+	 * of these variables may change. These are and will never be used
+	 * with the currently supported options, so it is safe to leave these
+	 * uninitialized.
+	 */
+	void *reserved_ptr1;
+	void *reserved_ptr2;
+	void *reserved_ptr3;
+	uint32_t reserved_int1;
+	uint32_t reserved_int2;
+	lzma_vli reserved_int3;
+	lzma_vli reserved_int4;
+	lzma_vli reserved_int5;
+	lzma_vli reserved_int6;
+	lzma_vli reserved_int7;
+	lzma_vli reserved_int8;
+	lzma_reserved_enum reserved_enum1;
+	lzma_reserved_enum reserved_enum2;
+	lzma_reserved_enum reserved_enum3;
+	lzma_reserved_enum reserved_enum4;
+	lzma_bool reserved_bool1;
+	lzma_bool reserved_bool2;
+	lzma_bool reserved_bool3;
+	lzma_bool reserved_bool4;
+	lzma_bool reserved_bool5;
+	lzma_bool reserved_bool6;
+	lzma_bool reserved_bool7;
+	lzma_bool reserved_bool8;
+
+} lzma_block;
+
+
+/**
+ * \brief       Decode the Block Header Size field
+ *
+ * To decode Block Header using lzma_block_header_decode(), the size of the
+ * Block Header has to be known and stored into lzma_block.header_size.
+ * The size can be calculated from the first byte of a Block using this macro.
+ * Note that if the first byte is 0x00, it indicates beginning of Index; use
+ * this macro only when the byte is not 0x00.
+ *
+ * There is no encoding macro, because Block Header encoder is enough for that.
+ */
+#define lzma_block_header_size_decode(b) (((uint32_t)(b) + 1) * 4)
+
+
+/**
+ * \brief       Calculate Block Header Size
+ *
+ * Calculate the minimum size needed for the Block Header field using the
+ * settings specified in the lzma_block structure. Note that it is OK to
+ * increase the calculated header_size value as long as it is a multiple of
+ * four and doesn't exceed LZMA_BLOCK_HEADER_SIZE_MAX. Increasing header_size
+ * just means that lzma_block_header_encode() will add Header Padding.
+ *
+ * \return      - LZMA_OK: Size calculated successfully and stored to
+ *                block->header_size.
+ *              - LZMA_OPTIONS_ERROR: Unsupported version, filters or
+ *                filter options.
+ *              - LZMA_PROG_ERROR: Invalid values like compressed_size == 0.
+ *
+ * \note        This doesn't check that all the options are valid i.e. this
+ *              may return LZMA_OK even if lzma_block_header_encode() or
+ *              lzma_block_encoder() would fail. If you want to validate the
+ *              filter chain, consider using lzma_memlimit_encoder() which as
+ *              a side-effect validates the filter chain.
+ */
+extern LZMA_API(lzma_ret) lzma_block_header_size(lzma_block *block)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Encode Block Header
+ *
+ * The caller must have calculated the size of the Block Header already with
+ * lzma_block_header_size(). If a value larger than the one calculated by
+ * lzma_block_header_size() is used, the Block Header will be padded to the
+ * specified size.
+ *
+ * \param       out         Beginning of the output buffer. This must be
+ *                          at least block->header_size bytes.
+ * \param       block       Block options to be encoded.
+ *
+ * \return      - LZMA_OK: Encoding was successful. block->header_size
+ *                bytes were written to output buffer.
+ *              - LZMA_OPTIONS_ERROR: Invalid or unsupported options.
+ *              - LZMA_PROG_ERROR: Invalid arguments, for example
+ *                block->header_size is invalid or block->filters is NULL.
+ */
+extern LZMA_API(lzma_ret) lzma_block_header_encode(
+		const lzma_block *block, uint8_t *out)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Decode Block Header
+ *
+ * block->version should be set to the highest value supported by the
+ * application; currently the only possible version is zero. This function
+ * will set version to the lowest value that still supports all the features
+ * required by the Block Header.
+ *
+ * The size of the Block Header must have already been decoded with
+ * lzma_block_header_size_decode() macro and stored to block->header_size.
+ *
+ * block->filters must have been allocated, but they don't need to be
+ * initialized (possible existing filter options are not freed).
+ *
+ * \param       block       Destination for Block options.
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() (and also free()
+ *                          if an error occurs).
+ * \param       in          Beginning of the input buffer. This must be
+ *                          at least block->header_size bytes.
+ *
+ * \return      - LZMA_OK: Decoding was successful. block->header_size
+ *                bytes were read from the input buffer.
+ *              - LZMA_OPTIONS_ERROR: The Block Header specifies some
+ *                unsupported options such as unsupported filters. This can
+ *                happen also if block->version was set to a too low value
+ *                compared to what would be required to properly represent
+ *                the information stored in the Block Header.
+ *              - LZMA_DATA_ERROR: Block Header is corrupt, for example,
+ *                the CRC32 doesn't match.
+ *              - LZMA_PROG_ERROR: Invalid arguments, for example
+ *                block->header_size is invalid or block->filters is NULL.
+ */
+extern LZMA_API(lzma_ret) lzma_block_header_decode(lzma_block *block,
+		lzma_allocator *allocator, const uint8_t *in)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Validate and set Compressed Size according to Unpadded Size
+ *
+ * Block Header stores Compressed Size, but Index has Unpadded Size. If the
+ * application has already parsed the Index and is now decoding Blocks,
+ * it can calculate Compressed Size from Unpadded Size. This function does
+ * exactly that with error checking:
+ *
+ *  - Compressed Size calculated from Unpadded Size must be positive integer,
+ *    that is, Unpadded Size must be big enough that after Block Header and
+ *    Check fields there's still at least one byte for Compressed Size.
+ *
+ *  - If Compressed Size was present in Block Header, the new value
+ *    calculated from Unpadded Size is compared against the value
+ *    from Block Header.
+ *
+ * \note        This function must be called _after_ decoding the Block Header
+ *              field so that it can properly validate Compressed Size if it
+ *              was present in Block Header.
+ *
+ * \return      - LZMA_OK: block->compressed_size was set successfully.
+ *              - LZMA_DATA_ERROR: unpadded_size is too small compared to
+ *                block->header_size and lzma_check_size(block->check).
+ *              - LZMA_PROG_ERROR: Some values are invalid. For example,
+ *                block->header_size must be a multiple of four and
+ *                between 8 and 1024 inclusive.
+ */
+extern LZMA_API(lzma_ret) lzma_block_compressed_size(
+		lzma_block *block, lzma_vli unpadded_size)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Calculate Unpadded Size
+ *
+ * The Index field stores Unpadded Size and Uncompressed Size. The latter
+ * can be taken directly from the lzma_block structure after coding a Block,
+ * but Unpadded Size needs to be calculated from Block Header Size,
+ * Compressed Size, and size of the Check field. This is where this function
+ * is needed.
+ *
+ * \return      Unpadded Size on success, or zero on error.
+ */
+extern LZMA_API(lzma_vli) lzma_block_unpadded_size(const lzma_block *block)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Calculate the total encoded size of a Block
+ *
+ * This is equivalent to lzma_block_unpadded_size() except that the returned
+ * value includes the size of the Block Padding field.
+ *
+ * \return      On success, total encoded size of the Block. On error,
+ *              zero is returned.
+ */
+extern LZMA_API(lzma_vli) lzma_block_total_size(const lzma_block *block)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Initialize .xz Block encoder
+ *
+ * Valid actions for lzma_code() are LZMA_RUN, LZMA_SYNC_FLUSH (only if the
+ * filter chain supports it), and LZMA_FINISH.
+ *
+ * \return      - LZMA_OK: All good, continue with lzma_code().
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_UNSUPPORTED_CHECK: block->check specifies a Check ID
+ *                that is not supported by this buid of liblzma. Initializing
+ *                the encoder failed.
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_block_encoder(
+		lzma_stream *strm, lzma_block *block)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Initialize .xz Block decoder
+ *
+ * Valid actions for lzma_code() are LZMA_RUN and LZMA_FINISH. Using
+ * LZMA_FINISH is not required. It is supported only for convenience.
+ *
+ * \return      - LZMA_OK: All good, continue with lzma_code().
+ *              - LZMA_UNSUPPORTED_CHECK: Initialization was successful, but
+ *                the given Check ID is not supported, thus Check will be
+ *                ignored.
+ *              - LZMA_PROG_ERROR
+ *              - LZMA_MEM_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_block_decoder(
+		lzma_stream *strm, lzma_block *block)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Calculate maximum output size for single-call Block encoding
+ *
+ * This is equivalent to lzma_stream_buffer_bound() but for .xz Blocks.
+ * See the documentation of lzma_stream_buffer_bound().
+ */
+extern LZMA_API(size_t) lzma_block_buffer_bound(size_t uncompressed_size)
+		lzma_nothrow;
+
+
+/**
+ * \brief       Single-call .xz Block encoder
+ *
+ * In contrast to the multi-call encoder initialized with
+ * lzma_block_encoder(), this function encodes also the Block Header. This
+ * is required to make it possible to write appropriate Block Header also
+ * in case the data isn't compressible, and different filter chain has to be
+ * used to encode the data in uncompressed form using uncompressed chunks
+ * of the LZMA2 filter.
+ *
+ * When the data isn't compressible, header_size, compressed_size, and
+ * uncompressed_size are set just like when the data was compressible, but
+ * it is possible that header_size is too small to hold the filter chain
+ * specified in block->filters, because that isn't necessarily the filter
+ * chain that was actually used to encode the data. lzma_block_unpadded_size()
+ * still works normally, because it doesn't read the filters array.
+ *
+ * \param       block       Block options: block->version, block->check,
+ *                          and block->filters must have been initialized.
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() and free().
+ * \param       in          Beginning of the input buffer
+ * \param       in_size     Size of the input buffer
+ * \param       out         Beginning of the output buffer
+ * \param       out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if encoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ *
+ * \return      - LZMA_OK: Encoding was successful.
+ *              - LZMA_BUF_ERROR: Not enough output buffer space.
+ *              - LZMA_UNSUPPORTED_CHECK
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_block_buffer_encode(
+		lzma_block *block, lzma_allocator *allocator,
+		const uint8_t *in, size_t in_size,
+		uint8_t *out, size_t *out_pos, size_t out_size)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Single-call .xz Block decoder
+ *
+ * This is single-call equivalent of lzma_block_decoder(), and requires that
+ * the caller has already decoded Block Header and checked its memory usage.
+ *
+ * \param       block       Block options just like with lzma_block_decoder().
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() and free().
+ * \param       in          Beginning of the input buffer
+ * \param       in_pos      The next byte will be read from in[*in_pos].
+ *                          *in_pos is updated only if decoding succeeds.
+ * \param       in_size     Size of the input buffer; the first byte that
+ *                          won't be read is in[in_size].
+ * \param       out         Beginning of the output buffer
+ * \param       out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if encoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ *
+ * \return      - LZMA_OK: Decoding was successful.
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_BUF_ERROR: Output buffer was too small.
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_block_buffer_decode(
+		lzma_block *block, lzma_allocator *allocator,
+		const uint8_t *in, size_t *in_pos, size_t in_size,
+		uint8_t *out, size_t *out_pos, size_t out_size)
+		lzma_nothrow;

winlibs/include/lzma/check.h

@@ -0,0 +1,150 @@
+/**
+ * \file        lzma/check.h
+ * \brief       Integrity checks
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/**
+ * \brief       Type of the integrity check (Check ID)
+ *
+ * The .xz format supports multiple types of checks that are calculated
+ * from the uncompressed data. They vary in both speed and ability to
+ * detect errors.
+ */
+typedef enum {
+	LZMA_CHECK_NONE     = 0,
+		/**<
+		 * No Check is calculated.
+		 *
+		 * Size of the Check field: 0 bytes
+		 */
+
+	LZMA_CHECK_CRC32    = 1,
+		/**<
+		 * CRC32 using the polynomial from the IEEE 802.3 standard
+		 *
+		 * Size of the Check field: 4 bytes
+		 */
+
+	LZMA_CHECK_CRC64    = 4,
+		/**<
+		 * CRC64 using the polynomial from the ECMA-182 standard
+		 *
+		 * Size of the Check field: 8 bytes
+		 */
+
+	LZMA_CHECK_SHA256   = 10
+		/**<
+		 * SHA-256
+		 *
+		 * Size of the Check field: 32 bytes
+		 */
+} lzma_check;
+
+
+/**
+ * \brief       Maximum valid Check ID
+ *
+ * The .xz file format specification specifies 16 Check IDs (0-15). Some
+ * of them are only reserved, that is, no actual Check algorithm has been
+ * assigned. When decoding, liblzma still accepts unknown Check IDs for
+ * future compatibility. If a valid but unsupported Check ID is detected,
+ * liblzma can indicate a warning; see the flags LZMA_TELL_NO_CHECK,
+ * LZMA_TELL_UNSUPPORTED_CHECK, and LZMA_TELL_ANY_CHECK in container.h.
+ */
+#define LZMA_CHECK_ID_MAX 15
+
+
+/**
+ * \brief       Test if the given Check ID is supported
+ *
+ * Return true if the given Check ID is supported by this liblzma build.
+ * Otherwise false is returned. It is safe to call this with a value that
+ * is not in the range [0, 15]; in that case the return value is always false.
+ *
+ * You can assume that LZMA_CHECK_NONE and LZMA_CHECK_CRC32 are always
+ * supported (even if liblzma is built with limited features).
+ */
+extern LZMA_API(lzma_bool) lzma_check_is_supported(lzma_check check)
+		lzma_nothrow lzma_attr_const;
+
+
+/**
+ * \brief       Get the size of the Check field with the given Check ID
+ *
+ * Although not all Check IDs have a check algorithm associated, the size of
+ * every Check is already frozen. This function returns the size (in bytes) of
+ * the Check field with the specified Check ID. The values are:
+ * { 0, 4, 4, 4, 8, 8, 8, 16, 16, 16, 32, 32, 32, 64, 64, 64 }
+ *
+ * If the argument is not in the range [0, 15], UINT32_MAX is returned.
+ */
+extern LZMA_API(uint32_t) lzma_check_size(lzma_check check)
+		lzma_nothrow lzma_attr_const;
+
+
+/**
+ * \brief       Maximum size of a Check field
+ */
+#define LZMA_CHECK_SIZE_MAX 64
+
+
+/**
+ * \brief       Calculate CRC32
+ *
+ * Calculate CRC32 using the polynomial from the IEEE 802.3 standard.
+ *
+ * \param       buf     Pointer to the input buffer
+ * \param       size    Size of the input buffer
+ * \param       crc     Previously returned CRC value. This is used to
+ *                      calculate the CRC of a big buffer in smaller chunks.
+ *                      Set to zero when starting a new calculation.
+ *
+ * \return      Updated CRC value, which can be passed to this function
+ *              again to continue CRC calculation.
+ */
+extern LZMA_API(uint32_t) lzma_crc32(
+		const uint8_t *buf, size_t size, uint32_t crc)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Calculate CRC64
+ *
+ * Calculate CRC64 using the polynomial from the ECMA-182 standard.
+ *
+ * This function is used similarly to lzma_crc32(). See its documentation.
+ */
+extern LZMA_API(uint64_t) lzma_crc64(
+		const uint8_t *buf, size_t size, uint64_t crc)
+		lzma_nothrow lzma_attr_pure;
+
+
+/*
+ * SHA-256 functions are currently not exported to public API.
+ * Contact Lasse Collin if you think it should be.
+ */
+
+
+/**
+ * \brief       Get the type of the integrity check
+ *
+ * This function can be called only immediately after lzma_code() has
+ * returned LZMA_NO_CHECK, LZMA_UNSUPPORTED_CHECK, or LZMA_GET_CHECK.
+ * Calling this function in any other situation has undefined behavior.
+ */
+extern LZMA_API(lzma_check) lzma_get_check(const lzma_stream *strm)
+		lzma_nothrow;

winlibs/include/lzma/container.h

@@ -0,0 +1,424 @@
+/**
+ * \file        lzma/container.h
+ * \brief       File formats
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/************
+ * Encoding *
+ ************/
+
+/**
+ * \brief       Default compression preset
+ *
+ * It's not straightforward to recommend a default preset, because in some
+ * cases keeping the resource usage relatively low is more important that
+ * getting the maximum compression ratio.
+ */
+#define LZMA_PRESET_DEFAULT     UINT32_C(6)
+
+
+/**
+ * \brief       Mask for preset level
+ *
+ * This is useful only if you need to extract the level from the preset
+ * variable. That should be rare.
+ */
+#define LZMA_PRESET_LEVEL_MASK  UINT32_C(0x1F)
+
+
+/*
+ * Preset flags
+ *
+ * Currently only one flag is defined.
+ */
+
+/**
+ * \brief       Extreme compression preset
+ *
+ * This flag modifies the preset to make the encoding significantly slower
+ * while improving the compression ratio only marginally. This is useful
+ * when you don't mind wasting time to get as small result as possible.
+ *
+ * This flag doesn't affect the memory usage requirements of the decoder (at
+ * least not significantly). The memory usage of the encoder may be increased
+ * a little but only at the lowest preset levels (0-3).
+ */
+#define LZMA_PRESET_EXTREME       (UINT32_C(1) << 31)
+
+
+/**
+ * \brief       Calculate approximate memory usage of easy encoder
+ *
+ * This function is a wrapper for lzma_raw_encoder_memusage().
+ *
+ * \param       preset  Compression preset (level and possible flags)
+ *
+ * \return      Number of bytes of memory required for the given
+ *              preset when encoding. If an error occurs, for example
+ *              due to unsupported preset, UINT64_MAX is returned.
+ */
+extern LZMA_API(uint64_t) lzma_easy_encoder_memusage(uint32_t preset)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Calculate approximate decoder memory usage of a preset
+ *
+ * This function is a wrapper for lzma_raw_decoder_memusage().
+ *
+ * \param       preset  Compression preset (level and possible flags)
+ *
+ * \return      Number of bytes of memory required to decompress a file
+ *              that was compressed using the given preset. If an error
+ *              occurs, for example due to unsupported preset, UINT64_MAX
+ *              is returned.
+ */
+extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Initialize .xz Stream encoder using a preset number
+ *
+ * This function is intended for those who just want to use the basic features
+ * if liblzma (that is, most developers out there).
+ *
+ * \param       strm    Pointer to lzma_stream that is at least initialized
+ *                      with LZMA_STREAM_INIT.
+ * \param       preset  Compression preset to use. A preset consist of level
+ *                      number and zero or more flags. Usually flags aren't
+ *                      used, so preset is simply a number [0, 9] which match
+ *                      the options -0 ... -9 of the xz command line tool.
+ *                      Additional flags can be be set using bitwise-or with
+ *                      the preset level number, e.g. 6 | LZMA_PRESET_EXTREME.
+ * \param       check   Integrity check type to use. See check.h for available
+ *                      checks. The xz command line tool defaults to
+ *                      LZMA_CHECK_CRC64, which is a good choice if you are
+ *                      unsure. LZMA_CHECK_CRC32 is good too as long as the
+ *                      uncompressed file is not many gigabytes.
+ *
+ * \return      - LZMA_OK: Initialization succeeded. Use lzma_code() to
+ *                encode your data.
+ *              - LZMA_MEM_ERROR: Memory allocation failed.
+ *              - LZMA_OPTIONS_ERROR: The given compression preset is not
+ *                supported by this build of liblzma.
+ *              - LZMA_UNSUPPORTED_CHECK: The given check type is not
+ *                supported by this liblzma build.
+ *              - LZMA_PROG_ERROR: One or more of the parameters have values
+ *                that will never be valid. For example, strm == NULL.
+ *
+ * If initialization fails (return value is not LZMA_OK), all the memory
+ * allocated for *strm by liblzma is always freed. Thus, there is no need
+ * to call lzma_end() after failed initialization.
+ *
+ * If initialization succeeds, use lzma_code() to do the actual encoding.
+ * Valid values for `action' (the second argument of lzma_code()) are
+ * LZMA_RUN, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, and LZMA_FINISH. In future,
+ * there may be compression levels or flags that don't support LZMA_SYNC_FLUSH.
+ */
+extern LZMA_API(lzma_ret) lzma_easy_encoder(
+		lzma_stream *strm, uint32_t preset, lzma_check check)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Single-call .xz Stream encoding using a preset number
+ *
+ * The maximum required output buffer size can be calculated with
+ * lzma_stream_buffer_bound().
+ *
+ * \param       preset      Compression preset to use. See the description
+ *                          in lzma_easy_encoder().
+ * \param       check       Type of the integrity check to calculate from
+ *                          uncompressed data.
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() and free().
+ * \param       in          Beginning of the input buffer
+ * \param       in_size     Size of the input buffer
+ * \param       out         Beginning of the output buffer
+ * \param       out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if encoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ *
+ * \return      - LZMA_OK: Encoding was successful.
+ *              - LZMA_BUF_ERROR: Not enough output buffer space.
+ *              - LZMA_UNSUPPORTED_CHECK
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_easy_buffer_encode(
+		uint32_t preset, lzma_check check,
+		lzma_allocator *allocator, const uint8_t *in, size_t in_size,
+		uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow;
+
+
+/**
+ * \brief       Initialize .xz Stream encoder using a custom filter chain
+ *
+ * \param       strm    Pointer to properly prepared lzma_stream
+ * \param       filters Array of filters. This must be terminated with
+ *                      filters[n].id = LZMA_VLI_UNKNOWN. See filter.h for
+ *                      more information.
+ * \param       check   Type of the integrity check to calculate from
+ *                      uncompressed data.
+ *
+ * \return      - LZMA_OK: Initialization was successful.
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_UNSUPPORTED_CHECK
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_stream_encoder(lzma_stream *strm,
+		const lzma_filter *filters, lzma_check check)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Initialize .lzma encoder (legacy file format)
+ *
+ * The .lzma format is sometimes called the LZMA_Alone format, which is the
+ * reason for the name of this function. The .lzma format supports only the
+ * LZMA1 filter. There is no support for integrity checks like CRC32.
+ *
+ * Use this function if and only if you need to create files readable by
+ * legacy LZMA tools such as LZMA Utils 4.32.x. Moving to the .xz format
+ * is strongly recommended.
+ *
+ * The valid action values for lzma_code() are LZMA_RUN and LZMA_FINISH.
+ * No kind of flushing is supported, because the file format doesn't make
+ * it possible.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_alone_encoder(
+		lzma_stream *strm, const lzma_options_lzma *options)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Calculate output buffer size for single-call Stream encoder
+ *
+ * When trying to compress uncompressible data, the encoded size will be
+ * slightly bigger than the input data. This function calculates how much
+ * output buffer space is required to be sure that lzma_stream_buffer_encode()
+ * doesn't return LZMA_BUF_ERROR.
+ *
+ * The calculated value is not exact, but it is guaranteed to be big enough.
+ * The actual maximum output space required may be slightly smaller (up to
+ * about 100 bytes). This should not be a problem in practice.
+ *
+ * If the calculated maximum size doesn't fit into size_t or would make the
+ * Stream grow past LZMA_VLI_MAX (which should never happen in practice),
+ * zero is returned to indicate the error.
+ *
+ * \note        The limit calculated by this function applies only to
+ *              single-call encoding. Multi-call encoding may (and probably
+ *              will) have larger maximum expansion when encoding
+ *              uncompressible data. Currently there is no function to
+ *              calculate the maximum expansion of multi-call encoding.
+ */
+extern LZMA_API(size_t) lzma_stream_buffer_bound(size_t uncompressed_size)
+		lzma_nothrow;
+
+
+/**
+ * \brief       Single-call .xz Stream encoder
+ *
+ * \param       filters     Array of filters. This must be terminated with
+ *                          filters[n].id = LZMA_VLI_UNKNOWN. See filter.h
+ *                          for more information.
+ * \param       check       Type of the integrity check to calculate from
+ *                          uncompressed data.
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() and free().
+ * \param       in          Beginning of the input buffer
+ * \param       in_size     Size of the input buffer
+ * \param       out         Beginning of the output buffer
+ * \param       out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if encoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ *
+ * \return      - LZMA_OK: Encoding was successful.
+ *              - LZMA_BUF_ERROR: Not enough output buffer space.
+ *              - LZMA_UNSUPPORTED_CHECK
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_stream_buffer_encode(
+		lzma_filter *filters, lzma_check check,
+		lzma_allocator *allocator, const uint8_t *in, size_t in_size,
+		uint8_t *out, size_t *out_pos, size_t out_size)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/************
+ * Decoding *
+ ************/
+
+/**
+ * This flag makes lzma_code() return LZMA_NO_CHECK if the input stream
+ * being decoded has no integrity check. Note that when used with
+ * lzma_auto_decoder(), all .lzma files will trigger LZMA_NO_CHECK
+ * if LZMA_TELL_NO_CHECK is used.
+ */
+#define LZMA_TELL_NO_CHECK              UINT32_C(0x01)
+
+
+/**
+ * This flag makes lzma_code() return LZMA_UNSUPPORTED_CHECK if the input
+ * stream has an integrity check, but the type of the integrity check is not
+ * supported by this liblzma version or build. Such files can still be
+ * decoded, but the integrity check cannot be verified.
+ */
+#define LZMA_TELL_UNSUPPORTED_CHECK     UINT32_C(0x02)
+
+
+/**
+ * This flag makes lzma_code() return LZMA_GET_CHECK as soon as the type
+ * of the integrity check is known. The type can then be got with
+ * lzma_get_check().
+ */
+#define LZMA_TELL_ANY_CHECK             UINT32_C(0x04)
+
+
+/**
+ * This flag enables decoding of concatenated files with file formats that
+ * allow concatenating compressed files as is. From the formats currently
+ * supported by liblzma, only the .xz format allows concatenated files.
+ * Concatenated files are not allowed with the legacy .lzma format.
+ *
+ * This flag also affects the usage of the `action' argument for lzma_code().
+ * When LZMA_CONCATENATED is used, lzma_code() won't return LZMA_STREAM_END
+ * unless LZMA_FINISH is used as `action'. Thus, the application has to set
+ * LZMA_FINISH in the same way as it does when encoding.
+ *
+ * If LZMA_CONCATENATED is not used, the decoders still accept LZMA_FINISH
+ * as `action' for lzma_code(), but the usage of LZMA_FINISH isn't required.
+ */
+#define LZMA_CONCATENATED               UINT32_C(0x08)
+
+
+/**
+ * \brief       Initialize .xz Stream decoder
+ *
+ * \param       strm        Pointer to properly prepared lzma_stream
+ * \param       memlimit    Memory usage limit as bytes. Use UINT64_MAX
+ *                          to effectively disable the limiter.
+ * \param       flags       Bitwise-or of zero or more of the decoder flags:
+ *                          LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK,
+ *                          LZMA_TELL_ANY_CHECK, LZMA_CONCATENATED
+ *
+ * \return      - LZMA_OK: Initialization was successful.
+ *              - LZMA_MEM_ERROR: Cannot allocate memory.
+ *              - LZMA_OPTIONS_ERROR: Unsupported flags
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_stream_decoder(
+		lzma_stream *strm, uint64_t memlimit, uint32_t flags)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Decode .xz Streams and .lzma files with autodetection
+ *
+ * This decoder autodetects between the .xz and .lzma file formats, and
+ * calls lzma_stream_decoder() or lzma_alone_decoder() once the type
+ * of the input file has been detected.
+ *
+ * \param       strm        Pointer to properly prepared lzma_stream
+ * \param       memlimit    Memory usage limit as bytes. Use UINT64_MAX
+ *                          to effectively disable the limiter.
+ * \param       flags       Bitwise-or of flags, or zero for no flags.
+ *
+ * \return      - LZMA_OK: Initialization was successful.
+ *              - LZMA_MEM_ERROR: Cannot allocate memory.
+ *              - LZMA_OPTIONS_ERROR: Unsupported flags
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_auto_decoder(
+		lzma_stream *strm, uint64_t memlimit, uint32_t flags)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Initialize .lzma decoder (legacy file format)
+ *
+ * Valid `action' arguments to lzma_code() are LZMA_RUN and LZMA_FINISH.
+ * There is no need to use LZMA_FINISH, but allowing it may simplify
+ * certain types of applications.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_alone_decoder(
+		lzma_stream *strm, uint64_t memlimit)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Single-call .xz Stream decoder
+ *
+ * \param       memlimit    Pointer to how much memory the decoder is allowed
+ *                          to allocate. The value pointed by this pointer is
+ *                          modified if and only if LZMA_MEMLIMIT_ERROR is
+ *                          returned.
+ * \param       flags       Bitwise-or of zero or more of the decoder flags:
+ *                          LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK,
+ *                          LZMA_CONCATENATED. Note that LZMA_TELL_ANY_CHECK
+ *                          is not allowed and will return LZMA_PROG_ERROR.
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() and free().
+ * \param       in          Beginning of the input buffer
+ * \param       in_pos      The next byte will be read from in[*in_pos].
+ *                          *in_pos is updated only if decoding succeeds.
+ * \param       in_size     Size of the input buffer; the first byte that
+ *                          won't be read is in[in_size].
+ * \param       out         Beginning of the output buffer
+ * \param       out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if decoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ *
+ * \return      - LZMA_OK: Decoding was successful.
+ *              - LZMA_FORMAT_ERROR
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_NO_CHECK: This can be returned only if using
+ *                the LZMA_TELL_NO_CHECK flag.
+ *              - LZMA_UNSUPPORTED_CHECK: This can be returned only if using
+ *                the LZMA_TELL_UNSUPPORTED_CHECK flag.
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_MEMLIMIT_ERROR: Memory usage limit was reached.
+ *                The minimum required memlimit value was stored to *memlimit.
+ *              - LZMA_BUF_ERROR: Output buffer was too small.
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_stream_buffer_decode(
+		uint64_t *memlimit, uint32_t flags, lzma_allocator *allocator,
+		const uint8_t *in, size_t *in_pos, size_t in_size,
+		uint8_t *out, size_t *out_pos, size_t out_size)
+		lzma_nothrow lzma_attr_warn_unused_result;

winlibs/include/lzma/delta.h

@@ -0,0 +1,77 @@
+/**
+ * \file        lzma/delta.h
+ * \brief       Delta filter
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/**
+ * \brief       Filter ID
+ *
+ * Filter ID of the Delta filter. This is used as lzma_filter.id.
+ */
+#define LZMA_FILTER_DELTA       LZMA_VLI_C(0x03)
+
+
+/**
+ * \brief       Type of the delta calculation
+ *
+ * Currently only byte-wise delta is supported. Other possible types could
+ * be, for example, delta of 16/32/64-bit little/big endian integers, but
+ * these are not currently planned since byte-wise delta is almost as good.
+ */
+typedef enum {
+	LZMA_DELTA_TYPE_BYTE
+} lzma_delta_type;
+
+
+/**
+ * \brief       Options for the Delta filter
+ *
+ * These options are needed by both encoder and decoder.
+ */
+typedef struct {
+	/** For now, this must always be LZMA_DELTA_TYPE_BYTE. */
+	lzma_delta_type type;
+
+	/**
+	 * \brief       Delta distance
+	 *
+	 * With the only currently supported type, LZMA_DELTA_TYPE_BYTE,
+	 * the distance is as bytes.
+	 *
+	 * Examples:
+	 *  - 16-bit stereo audio: distance = 4 bytes
+	 *  - 24-bit RGB image data: distance = 3 bytes
+	 */
+	uint32_t dist;
+#	define LZMA_DELTA_DIST_MIN 1
+#	define LZMA_DELTA_DIST_MAX 256
+
+	/*
+	 * Reserved space to allow possible future extensions without
+	 * breaking the ABI. You should not touch these, because the names
+	 * of these variables may change. These are and will never be used
+	 * when type is LZMA_DELTA_TYPE_BYTE, so it is safe to leave these
+	 * uninitialized.
+	 */
+	uint32_t reserved_int1;
+	uint32_t reserved_int2;
+	uint32_t reserved_int3;
+	uint32_t reserved_int4;
+	void *reserved_ptr1;
+	void *reserved_ptr2;
+
+} lzma_options_delta;

winlibs/include/lzma/filter.h

@@ -0,0 +1,424 @@
+/**
+ * \file        lzma/filter.h
+ * \brief       Common filter related types and functions
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/**
+ * \brief       Maximum number of filters in a chain
+ *
+ * A filter chain can have 1-4 filters, of which three are allowed to change
+ * the size of the data. Usually only one or two filters are needed.
+ */
+#define LZMA_FILTERS_MAX 4
+
+
+/**
+ * \brief       Filter options
+ *
+ * This structure is used to pass Filter ID and a pointer filter's
+ * options to liblzma. A few functions work with a single lzma_filter
+ * structure, while most functions expect a filter chain.
+ *
+ * A filter chain is indicated with an array of lzma_filter structures.
+ * The array is terminated with .id = LZMA_VLI_UNKNOWN. Thus, the filter
+ * array must have LZMA_FILTERS_MAX + 1 elements (that is, five) to
+ * be able to hold any arbitrary filter chain. This is important when
+ * using lzma_block_header_decode() from block.h, because too small
+ * array would make liblzma write past the end of the filters array.
+ */
+typedef struct {
+	/**
+	 * \brief       Filter ID
+	 *
+	 * Use constants whose name begin with `LZMA_FILTER_' to specify
+	 * different filters. In an array of lzma_filter structures, use
+	 * LZMA_VLI_UNKNOWN to indicate end of filters.
+	 *
+	 * \note        This is not an enum, because on some systems enums
+	 *              cannot be 64-bit.
+	 */
+	lzma_vli id;
+
+	/**
+	 * \brief       Pointer to filter-specific options structure
+	 *
+	 * If the filter doesn't need options, set this to NULL. If id is
+	 * set to LZMA_VLI_UNKNOWN, options is ignored, and thus
+	 * doesn't need be initialized.
+	 */
+	void *options;
+
+} lzma_filter;
+
+
+/**
+ * \brief       Test if the given Filter ID is supported for encoding
+ *
+ * Return true if the give Filter ID is supported for encoding by this
+ * liblzma build. Otherwise false is returned.
+ *
+ * There is no way to list which filters are available in this particular
+ * liblzma version and build. It would be useless, because the application
+ * couldn't know what kind of options the filter would need.
+ */
+extern LZMA_API(lzma_bool) lzma_filter_encoder_is_supported(lzma_vli id)
+		lzma_nothrow lzma_attr_const;
+
+
+/**
+ * \brief       Test if the given Filter ID is supported for decoding
+ *
+ * Return true if the give Filter ID is supported for decoding by this
+ * liblzma build. Otherwise false is returned.
+ */
+extern LZMA_API(lzma_bool) lzma_filter_decoder_is_supported(lzma_vli id)
+		lzma_nothrow lzma_attr_const;
+
+
+/**
+ * \brief       Copy the filters array
+ *
+ * Copy the Filter IDs and filter-specific options from src to dest.
+ * Up to LZMA_FILTERS_MAX filters are copied, plus the terminating
+ * .id == LZMA_VLI_UNKNOWN. Thus, dest should have at least
+ * LZMA_FILTERS_MAX + 1 elements space unless the caller knows that
+ * src is smaller than that.
+ *
+ * Unless the filter-specific options is NULL, the Filter ID has to be
+ * supported by liblzma, because liblzma needs to know the size of every
+ * filter-specific options structure. The filter-specific options are not
+ * validated. If options is NULL, any unsupported Filter IDs are copied
+ * without returning an error.
+ *
+ * Old filter-specific options in dest are not freed, so dest doesn't
+ * need to be initialized by the caller in any way.
+ *
+ * If an error occurs, memory possibly already allocated by this function
+ * is always freed.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_OPTIONS_ERROR: Unsupported Filter ID and its options
+ *                is not NULL.
+ *              - LZMA_PROG_ERROR: src or dest is NULL.
+ */
+extern LZMA_API(lzma_ret) lzma_filters_copy(const lzma_filter *src,
+		lzma_filter *dest, lzma_allocator *allocator) lzma_nothrow;
+
+
+/**
+ * \brief       Calculate approximate memory requirements for raw encoder
+ *
+ * This function can be used to calculate the memory requirements for
+ * Block and Stream encoders too because Block and Stream encoders don't
+ * need significantly more memory than raw encoder.
+ *
+ * \param       filters     Array of filters terminated with
+ *                          .id == LZMA_VLI_UNKNOWN.
+ *
+ * \return      Number of bytes of memory required for the given
+ *              filter chain when encoding. If an error occurs,
+ *              for example due to unsupported filter chain,
+ *              UINT64_MAX is returned.
+ */
+extern LZMA_API(uint64_t) lzma_raw_encoder_memusage(const lzma_filter *filters)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Calculate approximate memory requirements for raw decoder
+ *
+ * This function can be used to calculate the memory requirements for
+ * Block and Stream decoders too because Block and Stream decoders don't
+ * need significantly more memory than raw decoder.
+ *
+ * \param       filters     Array of filters terminated with
+ *                          .id == LZMA_VLI_UNKNOWN.
+ *
+ * \return      Number of bytes of memory required for the given
+ *              filter chain when decoding. If an error occurs,
+ *              for example due to unsupported filter chain,
+ *              UINT64_MAX is returned.
+ */
+extern LZMA_API(uint64_t) lzma_raw_decoder_memusage(const lzma_filter *filters)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Initialize raw encoder
+ *
+ * This function may be useful when implementing custom file formats.
+ *
+ * \param       strm    Pointer to properly prepared lzma_stream
+ * \param       filters Array of lzma_filter structures. The end of the
+ *                      array must be marked with .id = LZMA_VLI_UNKNOWN.
+ *
+ * The `action' with lzma_code() can be LZMA_RUN, LZMA_SYNC_FLUSH (if the
+ * filter chain supports it), or LZMA_FINISH.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_raw_encoder(
+		lzma_stream *strm, const lzma_filter *filters)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Initialize raw decoder
+ *
+ * The initialization of raw decoder goes similarly to raw encoder.
+ *
+ * The `action' with lzma_code() can be LZMA_RUN or LZMA_FINISH. Using
+ * LZMA_FINISH is not required, it is supported just for convenience.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_raw_decoder(
+		lzma_stream *strm, const lzma_filter *filters)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Update the filter chain in the encoder
+ *
+ * This function is for advanced users only. This function has two slightly
+ * different purposes:
+ *
+ *  - After LZMA_FULL_FLUSH when using Stream encoder: Set a new filter
+ *    chain, which will be used starting from the next Block.
+ *
+ *  - After LZMA_SYNC_FLUSH using Raw, Block, or Stream encoder: Change
+ *    the filter-specific options in the middle of encoding. The actual
+ *    filters in the chain (Filter IDs) cannot be changed. In the future,
+ *    it might become possible to change the filter options without
+ *    using LZMA_SYNC_FLUSH.
+ *
+ * While rarely useful, this function may be called also when no data has
+ * been compressed yet. In that case, this function will behave as if
+ * LZMA_FULL_FLUSH (Stream encoder) or LZMA_SYNC_FLUSH (Raw or Block
+ * encoder) had been used right before calling this function.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_MEMLIMIT_ERROR
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_filters_update(
+		lzma_stream *strm, const lzma_filter *filters) lzma_nothrow;
+
+
+/**
+ * \brief       Single-call raw encoder
+ *
+ * \param       filters     Array of lzma_filter structures. The end of the
+ *                          array must be marked with .id = LZMA_VLI_UNKNOWN.
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() and free().
+ * \param       in          Beginning of the input buffer
+ * \param       in_size     Size of the input buffer
+ * \param       out         Beginning of the output buffer
+ * \param       out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if encoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ *
+ * \return      - LZMA_OK: Encoding was successful.
+ *              - LZMA_BUF_ERROR: Not enough output buffer space.
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_PROG_ERROR
+ *
+ * \note        There is no function to calculate how big output buffer
+ *              would surely be big enough. (lzma_stream_buffer_bound()
+ *              works only for lzma_stream_buffer_encode(); raw encoder
+ *              won't necessarily meet that bound.)
+ */
+extern LZMA_API(lzma_ret) lzma_raw_buffer_encode(
+		const lzma_filter *filters, lzma_allocator *allocator,
+		const uint8_t *in, size_t in_size, uint8_t *out,
+		size_t *out_pos, size_t out_size) lzma_nothrow;
+
+
+/**
+ * \brief       Single-call raw decoder
+ *
+ * \param       filters     Array of lzma_filter structures. The end of the
+ *                          array must be marked with .id = LZMA_VLI_UNKNOWN.
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() and free().
+ * \param       in          Beginning of the input buffer
+ * \param       in_pos      The next byte will be read from in[*in_pos].
+ *                          *in_pos is updated only if decoding succeeds.
+ * \param       in_size     Size of the input buffer; the first byte that
+ *                          won't be read is in[in_size].
+ * \param       out         Beginning of the output buffer
+ * \param       out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if encoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ */
+extern LZMA_API(lzma_ret) lzma_raw_buffer_decode(
+		const lzma_filter *filters, lzma_allocator *allocator,
+		const uint8_t *in, size_t *in_pos, size_t in_size,
+		uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow;
+
+
+/**
+ * \brief       Get the size of the Filter Properties field
+ *
+ * This function may be useful when implementing custom file formats
+ * using the raw encoder and decoder.
+ *
+ * \param       size    Pointer to uint32_t to hold the size of the properties
+ * \param       filter  Filter ID and options (the size of the properties may
+ *                      vary depending on the options)
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_PROG_ERROR
+ *
+ * \note        This function validates the Filter ID, but does not
+ *              necessarily validate the options. Thus, it is possible
+ *              that this returns LZMA_OK while the following call to
+ *              lzma_properties_encode() returns LZMA_OPTIONS_ERROR.
+ */
+extern LZMA_API(lzma_ret) lzma_properties_size(
+		uint32_t *size, const lzma_filter *filter) lzma_nothrow;
+
+
+/**
+ * \brief       Encode the Filter Properties field
+ *
+ * \param       filter  Filter ID and options
+ * \param       props   Buffer to hold the encoded options. The size of
+ *                      buffer must have been already determined with
+ *                      lzma_properties_size().
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_PROG_ERROR
+ *
+ * \note        Even this function won't validate more options than actually
+ *              necessary. Thus, it is possible that encoding the properties
+ *              succeeds but using the same options to initialize the encoder
+ *              will fail.
+ *
+ * \note        If lzma_properties_size() indicated that the size
+ *              of the Filter Properties field is zero, calling
+ *              lzma_properties_encode() is not required, but it
+ *              won't do any harm either.
+ */
+extern LZMA_API(lzma_ret) lzma_properties_encode(
+		const lzma_filter *filter, uint8_t *props) lzma_nothrow;
+
+
+/**
+ * \brief       Decode the Filter Properties field
+ *
+ * \param       filter      filter->id must have been set to the correct
+ *                          Filter ID. filter->options doesn't need to be
+ *                          initialized (it's not freed by this function). The
+ *                          decoded options will be stored to filter->options.
+ *                          filter->options is set to NULL if there are no
+ *                          properties or if an error occurs.
+ * \param       allocator   Custom memory allocator used to allocate the
+ *                          options. Set to NULL to use the default malloc(),
+ *                          and in case of an error, also free().
+ * \param       props       Input buffer containing the properties.
+ * \param       props_size  Size of the properties. This must be the exact
+ *                          size; giving too much or too little input will
+ *                          return LZMA_OPTIONS_ERROR.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_MEM_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_properties_decode(
+		lzma_filter *filter, lzma_allocator *allocator,
+		const uint8_t *props, size_t props_size) lzma_nothrow;
+
+
+/**
+ * \brief       Calculate encoded size of a Filter Flags field
+ *
+ * Knowing the size of Filter Flags is useful to know when allocating
+ * memory to hold the encoded Filter Flags.
+ *
+ * \param       size    Pointer to integer to hold the calculated size
+ * \param       filter  Filter ID and associated options whose encoded
+ *                      size is to be calculated
+ *
+ * \return      - LZMA_OK: *size set successfully. Note that this doesn't
+ *                guarantee that filter->options is valid, thus
+ *                lzma_filter_flags_encode() may still fail.
+ *              - LZMA_OPTIONS_ERROR: Unknown Filter ID or unsupported options.
+ *              - LZMA_PROG_ERROR: Invalid options
+ *
+ * \note        If you need to calculate size of List of Filter Flags,
+ *              you need to loop over every lzma_filter entry.
+ */
+extern LZMA_API(lzma_ret) lzma_filter_flags_size(
+		uint32_t *size, const lzma_filter *filter)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Encode Filter Flags into given buffer
+ *
+ * In contrast to some functions, this doesn't allocate the needed buffer.
+ * This is due to how this function is used internally by liblzma.
+ *
+ * \param       filter      Filter ID and options to be encoded
+ * \param       out         Beginning of the output buffer
+ * \param       out_pos     out[*out_pos] is the next write position. This
+ *                          is updated by the encoder.
+ * \param       out_size    out[out_size] is the first byte to not write.
+ *
+ * \return      - LZMA_OK: Encoding was successful.
+ *              - LZMA_OPTIONS_ERROR: Invalid or unsupported options.
+ *              - LZMA_PROG_ERROR: Invalid options or not enough output
+ *                buffer space (you should have checked it with
+ *                lzma_filter_flags_size()).
+ */
+extern LZMA_API(lzma_ret) lzma_filter_flags_encode(const lzma_filter *filter,
+		uint8_t *out, size_t *out_pos, size_t out_size)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Decode Filter Flags from given buffer
+ *
+ * The decoded result is stored into *filter. The old value of
+ * filter->options is not free()d.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_filter_flags_decode(
+		lzma_filter *filter, lzma_allocator *allocator,
+		const uint8_t *in, size_t *in_pos, size_t in_size)
+		lzma_nothrow lzma_attr_warn_unused_result;

winlibs/include/lzma/hardware.h

@@ -0,0 +1,50 @@
+/**
+ * \file        lzma/hardware.h
+ * \brief       Hardware information
+ *
+ * Since liblzma can consume a lot of system resources, it also provides
+ * ways to limit the resource usage. Applications linking against liblzma
+ * need to do the actual decisions how much resources to let liblzma to use.
+ * To ease making these decisions, liblzma provides functions to find out
+ * the relevant capabilities of the underlaying hardware. Currently there
+ * is only a function to find out the amount of RAM, but in the future there
+ * will be also a function to detect how many concurrent threads the system
+ * can run.
+ *
+ * \note        On some operating systems, these function may temporarily
+ *              load a shared library or open file descriptor(s) to find out
+ *              the requested hardware information. Unless the application
+ *              assumes that specific file descriptors are not touched by
+ *              other threads, this should have no effect on thread safety.
+ *              Possible operations involving file descriptors will restart
+ *              the syscalls if they return EINTR.
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/**
+ * \brief       Get the total amount of physical memory (RAM) in bytes
+ *
+ * This function may be useful when determining a reasonable memory
+ * usage limit for decompressing or how much memory it is OK to use
+ * for compressing.
+ *
+ * \return      On success, the total amount of physical memory in bytes
+ *              is returned. If the amount of RAM cannot be determined,
+ *              zero is returned. This can happen if an error occurs
+ *              or if there is no code in liblzma to detect the amount
+ *              of RAM on the specific operating system.
+ */
+extern LZMA_API(uint64_t) lzma_physmem(void) lzma_nothrow;

winlibs/include/lzma/index.h

@@ -0,0 +1,682 @@
+/**
+ * \file        lzma/index.h
+ * \brief       Handling of .xz Index and related information
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/**
+ * \brief       Opaque data type to hold the Index(es) and other information
+ *
+ * lzma_index often holds just one .xz Index and possibly the Stream Flags
+ * of the same Stream and size of the Stream Padding field. However,
+ * multiple lzma_indexes can be concatenated with lzma_index_cat() and then
+ * there may be information about multiple Streams in the same lzma_index.
+ *
+ * Notes about thread safety: Only one thread may modify lzma_index at
+ * a time. All functions that take non-const pointer to lzma_index
+ * modify it. As long as no thread is modifying the lzma_index, getting
+ * information from the same lzma_index can be done from multiple threads
+ * at the same time with functions that take a const pointer to
+ * lzma_index or use lzma_index_iter. The same iterator must be used
+ * only by one thread at a time, of course, but there can be as many
+ * iterators for the same lzma_index as needed.
+ */
+typedef struct lzma_index_s lzma_index;
+
+
+/**
+ * \brief       Iterator to get information about Blocks and Streams
+ */
+typedef struct {
+	struct {
+		/**
+		 * \brief       Pointer to Stream Flags
+		 *
+		 * This is NULL if Stream Flags have not been set for
+		 * this Stream with lzma_index_stream_flags().
+		 */
+		const lzma_stream_flags *flags;
+
+		const void *reserved_ptr1;
+		const void *reserved_ptr2;
+		const void *reserved_ptr3;
+
+		/**
+		 * \brief       Stream number in the lzma_index
+		 *
+		 * The first Stream is 1.
+		 */
+		lzma_vli number;
+
+		/**
+		 * \brief       Number of Blocks in the Stream
+		 *
+		 * If this is zero, the block structure below has
+		 * undefined values.
+		 */
+		lzma_vli block_count;
+
+		/**
+		 * \brief       Compressed start offset of this Stream
+		 *
+		 * The offset is relative to the beginning of the lzma_index
+		 * (i.e. usually the beginning of the .xz file).
+		 */
+		lzma_vli compressed_offset;
+
+		/**
+		 * \brief       Uncompressed start offset of this Stream
+		 *
+		 * The offset is relative to the beginning of the lzma_index
+		 * (i.e. usually the beginning of the .xz file).
+		 */
+		lzma_vli uncompressed_offset;
+
+		/**
+		 * \brief       Compressed size of this Stream
+		 *
+		 * This includes all headers except the possible
+		 * Stream Padding after this Stream.
+		 */
+		lzma_vli compressed_size;
+
+		/**
+		 * \brief       Uncompressed size of this Stream
+		 */
+		lzma_vli uncompressed_size;
+
+		/**
+		 * \brief       Size of Stream Padding after this Stream
+		 *
+		 * If it hasn't been set with lzma_index_stream_padding(),
+		 * this defaults to zero. Stream Padding is always
+		 * a multiple of four bytes.
+		 */
+		lzma_vli padding;
+
+		lzma_vli reserved_vli1;
+		lzma_vli reserved_vli2;
+		lzma_vli reserved_vli3;
+		lzma_vli reserved_vli4;
+	} stream;
+
+	struct {
+		/**
+		 * \brief       Block number in the file
+		 *
+		 * The first Block is 1.
+		 */
+		lzma_vli number_in_file;
+
+		/**
+		 * \brief       Compressed start offset of this Block
+		 *
+		 * This offset is relative to the beginning of the
+		 * lzma_index (i.e. usually the beginning of the .xz file).
+		 * Normally this is where you should seek in the .xz file
+		 * to start decompressing this Block.
+		 */
+		lzma_vli compressed_file_offset;
+
+		/**
+		 * \brief       Uncompressed start offset of this Block
+		 *
+		 * This offset is relative to the beginning of the lzma_index
+		 * (i.e. usually the beginning of the .xz file).
+		 *
+		 * When doing random-access reading, it is possible that
+		 * the target offset is not exactly at Block boundary. One
+		 * will need to compare the target offset against
+		 * uncompressed_file_offset or uncompressed_stream_offset,
+		 * and possibly decode and throw away some amount of data
+		 * before reaching the target offset.
+		 */
+		lzma_vli uncompressed_file_offset;
+
+		/**
+		 * \brief       Block number in this Stream
+		 *
+		 * The first Block is 1.
+		 */
+		lzma_vli number_in_stream;
+
+		/**
+		 * \brief       Compressed start offset of this Block
+		 *
+		 * This offset is relative to the beginning of the Stream
+		 * containing this Block.
+		 */
+		lzma_vli compressed_stream_offset;
+
+		/**
+		 * \brief       Uncompressed start offset of this Block
+		 *
+		 * This offset is relative to the beginning of the Stream
+		 * containing this Block.
+		 */
+		lzma_vli uncompressed_stream_offset;
+
+		/**
+		 * \brief       Uncompressed size of this Block
+		 *
+		 * You should pass this to the Block decoder if you will
+		 * decode this Block. It will allow the Block decoder to
+		 * validate the uncompressed size.
+		 */
+		lzma_vli uncompressed_size;
+
+		/**
+		 * \brief       Unpadded size of this Block
+		 *
+		 * You should pass this to the Block decoder if you will
+		 * decode this Block. It will allow the Block decoder to
+		 * validate the unpadded size.
+		 */
+		lzma_vli unpadded_size;
+
+		/**
+		 * \brief       Total compressed size
+		 *
+		 * This includes all headers and padding in this Block.
+		 * This is useful if you need to know how many bytes
+		 * the Block decoder will actually read.
+		 */
+		lzma_vli total_size;
+
+		lzma_vli reserved_vli1;
+		lzma_vli reserved_vli2;
+		lzma_vli reserved_vli3;
+		lzma_vli reserved_vli4;
+
+		const void *reserved_ptr1;
+		const void *reserved_ptr2;
+		const void *reserved_ptr3;
+		const void *reserved_ptr4;
+	} block;
+
+	/*
+	 * Internal data which is used to store the state of the iterator.
+	 * The exact format may vary between liblzma versions, so don't
+	 * touch these in any way.
+	 */
+	union {
+		const void *p;
+		size_t s;
+		lzma_vli v;
+	} internal[6];
+} lzma_index_iter;
+
+
+/**
+ * \brief       Operation mode for lzma_index_iter_next()
+ */
+typedef enum {
+	LZMA_INDEX_ITER_ANY             = 0,
+		/**<
+		 * \brief       Get the next Block or Stream
+		 *
+		 * Go to the next Block if the current Stream has at least
+		 * one Block left. Otherwise go to the next Stream even if
+		 * it has no Blocks. If the Stream has no Blocks
+		 * (lzma_index_iter.stream.block_count == 0),
+		 * lzma_index_iter.block will have undefined values.
+		 */
+
+	LZMA_INDEX_ITER_STREAM          = 1,
+		/**<
+		 * \brief       Get the next Stream
+		 *
+		 * Go to the next Stream even if the current Stream has
+		 * unread Blocks left. If the next Stream has at least one
+		 * Block, the iterator will point to the first Block.
+		 * If there are no Blocks, lzma_index_iter.block will have
+		 * undefined values.
+		 */
+
+	LZMA_INDEX_ITER_BLOCK           = 2,
+		/**<
+		 * \brief       Get the next Block
+		 *
+		 * Go to the next Block if the current Stream has at least
+		 * one Block left. If the current Stream has no Blocks left,
+		 * the next Stream with at least one Block is located and
+		 * the iterator will be made to point to the first Block of
+		 * that Stream.
+		 */
+
+	LZMA_INDEX_ITER_NONEMPTY_BLOCK  = 3
+		/**<
+		 * \brief       Get the next non-empty Block
+		 *
+		 * This is like LZMA_INDEX_ITER_BLOCK except that it will
+		 * skip Blocks whose Uncompressed Size is zero.
+		 */
+
+} lzma_index_iter_mode;
+
+
+/**
+ * \brief       Calculate memory usage of lzma_index
+ *
+ * On disk, the size of the Index field depends on both the number of Records
+ * stored and how big values the Records store (due to variable-length integer
+ * encoding). When the Index is kept in lzma_index structure, the memory usage
+ * depends only on the number of Records/Blocks stored in the Index(es), and
+ * in case of concatenated lzma_indexes, the number of Streams. The size in
+ * RAM is almost always significantly bigger than in the encoded form on disk.
+ *
+ * This function calculates an approximate amount of memory needed hold
+ * the given number of Streams and Blocks in lzma_index structure. This
+ * value may vary between CPU architectures and also between liblzma versions
+ * if the internal implementation is modified.
+ */
+extern LZMA_API(uint64_t) lzma_index_memusage(
+		lzma_vli streams, lzma_vli blocks) lzma_nothrow;
+
+
+/**
+ * \brief       Calculate the memory usage of an existing lzma_index
+ *
+ * This is a shorthand for lzma_index_memusage(lzma_index_stream_count(i),
+ * lzma_index_block_count(i)).
+ */
+extern LZMA_API(uint64_t) lzma_index_memused(const lzma_index *i)
+		lzma_nothrow;
+
+
+/**
+ * \brief       Allocate and initialize a new lzma_index structure
+ *
+ * \return      On success, a pointer to an empty initialized lzma_index is
+ *              returned. If allocation fails, NULL is returned.
+ */
+extern LZMA_API(lzma_index *) lzma_index_init(lzma_allocator *allocator)
+		lzma_nothrow;
+
+
+/**
+ * \brief       Deallocate lzma_index
+ *
+ * If i is NULL, this does nothing.
+ */
+extern LZMA_API(void) lzma_index_end(lzma_index *i, lzma_allocator *allocator)
+		lzma_nothrow;
+
+
+/**
+ * \brief       Add a new Block to lzma_index
+ *
+ * \param       i                 Pointer to a lzma_index structure
+ * \param       allocator         Pointer to lzma_allocator, or NULL to
+ *                                use malloc()
+ * \param       unpadded_size     Unpadded Size of a Block. This can be
+ *                                calculated with lzma_block_unpadded_size()
+ *                                after encoding or decoding the Block.
+ * \param       uncompressed_size Uncompressed Size of a Block. This can be
+ *                                taken directly from lzma_block structure
+ *                                after encoding or decoding the Block.
+ *
+ * Appending a new Block does not invalidate iterators. For example,
+ * if an iterator was pointing to the end of the lzma_index, after
+ * lzma_index_append() it is possible to read the next Block with
+ * an existing iterator.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_DATA_ERROR: Compressed or uncompressed size of the
+ *                Stream or size of the Index field would grow too big.
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_index_append(
+		lzma_index *i, lzma_allocator *allocator,
+		lzma_vli unpadded_size, lzma_vli uncompressed_size)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Set the Stream Flags
+ *
+ * Set the Stream Flags of the last (and typically the only) Stream
+ * in lzma_index. This can be useful when reading information from the
+ * lzma_index, because to decode Blocks, knowing the integrity check type
+ * is needed.
+ *
+ * The given Stream Flags are copied into internal preallocated structure
+ * in the lzma_index, thus the caller doesn't need to keep the *stream_flags
+ * available after calling this function.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_OPTIONS_ERROR: Unsupported stream_flags->version.
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_index_stream_flags(
+		lzma_index *i, const lzma_stream_flags *stream_flags)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Get the types of integrity Checks
+ *
+ * If lzma_index_stream_flags() is used to set the Stream Flags for
+ * every Stream, lzma_index_checks() can be used to get a bitmask to
+ * indicate which Check types have been used. It can be useful e.g. if
+ * showing the Check types to the user.
+ *
+ * The bitmask is 1 << check_id, e.g. CRC32 is 1 << 1 and SHA-256 is 1 << 10.
+ */
+extern LZMA_API(uint32_t) lzma_index_checks(const lzma_index *i)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Set the amount of Stream Padding
+ *
+ * Set the amount of Stream Padding of the last (and typically the only)
+ * Stream in the lzma_index. This is needed when planning to do random-access
+ * reading within multiple concatenated Streams.
+ *
+ * By default, the amount of Stream Padding is assumed to be zero bytes.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_DATA_ERROR: The file size would grow too big.
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_index_stream_padding(
+		lzma_index *i, lzma_vli stream_padding)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Get the number of Streams
+ */
+extern LZMA_API(lzma_vli) lzma_index_stream_count(const lzma_index *i)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Get the number of Blocks
+ *
+ * This returns the total number of Blocks in lzma_index. To get number
+ * of Blocks in individual Streams, use lzma_index_iter.
+ */
+extern LZMA_API(lzma_vli) lzma_index_block_count(const lzma_index *i)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Get the size of the Index field as bytes
+ *
+ * This is needed to verify the Backward Size field in the Stream Footer.
+ */
+extern LZMA_API(lzma_vli) lzma_index_size(const lzma_index *i)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Get the total size of the Stream
+ *
+ * If multiple lzma_indexes have been combined, this works as if the Blocks
+ * were in a single Stream. This is useful if you are going to combine
+ * Blocks from multiple Streams into a single new Stream.
+ */
+extern LZMA_API(lzma_vli) lzma_index_stream_size(const lzma_index *i)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Get the total size of the Blocks
+ *
+ * This doesn't include the Stream Header, Stream Footer, Stream Padding,
+ * or Index fields.
+ */
+extern LZMA_API(lzma_vli) lzma_index_total_size(const lzma_index *i)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Get the total size of the file
+ *
+ * When no lzma_indexes have been combined with lzma_index_cat() and there is
+ * no Stream Padding, this function is identical to lzma_index_stream_size().
+ * If multiple lzma_indexes have been combined, this includes also the headers
+ * of each separate Stream and the possible Stream Padding fields.
+ */
+extern LZMA_API(lzma_vli) lzma_index_file_size(const lzma_index *i)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Get the uncompressed size of the file
+ */
+extern LZMA_API(lzma_vli) lzma_index_uncompressed_size(const lzma_index *i)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Initialize an iterator
+ *
+ * \param       iter    Pointer to a lzma_index_iter structure
+ * \param       i       lzma_index to which the iterator will be associated
+ *
+ * This function associates the iterator with the given lzma_index, and calls
+ * lzma_index_iter_rewind() on the iterator.
+ *
+ * This function doesn't allocate any memory, thus there is no
+ * lzma_index_iter_end(). The iterator is valid as long as the
+ * associated lzma_index is valid, that is, until lzma_index_end() or
+ * using it as source in lzma_index_cat(). Specifically, lzma_index doesn't
+ * become invalid if new Blocks are added to it with lzma_index_append() or
+ * if it is used as the destination in lzma_index_cat().
+ *
+ * It is safe to make copies of an initialized lzma_index_iter, for example,
+ * to easily restart reading at some particular position.
+ */
+extern LZMA_API(void) lzma_index_iter_init(
+		lzma_index_iter *iter, const lzma_index *i) lzma_nothrow;
+
+
+/**
+ * \brief       Rewind the iterator
+ *
+ * Rewind the iterator so that next call to lzma_index_iter_next() will
+ * return the first Block or Stream.
+ */
+extern LZMA_API(void) lzma_index_iter_rewind(lzma_index_iter *iter)
+		lzma_nothrow;
+
+
+/**
+ * \brief       Get the next Block or Stream
+ *
+ * \param       iter    Iterator initialized with lzma_index_iter_init()
+ * \param       mode    Specify what kind of information the caller wants
+ *                      to get. See lzma_index_iter_mode for details.
+ *
+ * \return      If next Block or Stream matching the mode was found, *iter
+ *              is updated and this function returns false. If no Block or
+ *              Stream matching the mode is found, *iter is not modified
+ *              and this function returns true. If mode is set to an unknown
+ *              value, *iter is not modified and this function returns true.
+ */
+extern LZMA_API(lzma_bool) lzma_index_iter_next(
+		lzma_index_iter *iter, lzma_index_iter_mode mode)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Locate a Block
+ *
+ * If it is possible to seek in the .xz file, it is possible to parse
+ * the Index field(s) and use lzma_index_iter_locate() to do random-access
+ * reading with granularity of Block size.
+ *
+ * \param       iter    Iterator that was earlier initialized with
+ *                      lzma_index_iter_init().
+ * \param       target  Uncompressed target offset which the caller would
+ *                      like to locate from the Stream
+ *
+ * If the target is smaller than the uncompressed size of the Stream (can be
+ * checked with lzma_index_uncompressed_size()):
+ *  - Information about the Stream and Block containing the requested
+ *    uncompressed offset is stored into *iter.
+ *  - Internal state of the iterator is adjusted so that
+ *    lzma_index_iter_next() can be used to read subsequent Blocks or Streams.
+ *  - This function returns false.
+ *
+ * If target is greater than the uncompressed size of the Stream, *iter
+ * is not modified, and this function returns true.
+ */
+extern LZMA_API(lzma_bool) lzma_index_iter_locate(
+		lzma_index_iter *iter, lzma_vli target) lzma_nothrow;
+
+
+/**
+ * \brief       Concatenate lzma_indexes
+ *
+ * Concatenating lzma_indexes is useful when doing random-access reading in
+ * multi-Stream .xz file, or when combining multiple Streams into single
+ * Stream.
+ *
+ * \param       dest      lzma_index after which src is appended
+ * \param       src       lzma_index to be appended after dest. If this
+ *                        function succeeds, the memory allocated for src
+ *                        is freed or moved to be part of dest, and all
+ *                        iterators pointing to src will become invalid.
+ * \param       allocator Custom memory allocator; can be NULL to use
+ *                        malloc() and free().
+ *
+ * \return      - LZMA_OK: lzma_indexes were concatenated successfully.
+ *                src is now a dangling pointer.
+ *              - LZMA_DATA_ERROR: *dest would grow too big.
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_index_cat(
+		lzma_index *dest, lzma_index *src, lzma_allocator *allocator)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Duplicate lzma_index
+ *
+ * \return      A copy of the lzma_index, or NULL if memory allocation failed.
+ */
+extern LZMA_API(lzma_index *) lzma_index_dup(
+		const lzma_index *i, lzma_allocator *allocator)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Initialize .xz Index encoder
+ *
+ * \param       strm        Pointer to properly prepared lzma_stream
+ * \param       i           Pointer to lzma_index which should be encoded.
+ *
+ * The valid `action' values for lzma_code() are LZMA_RUN and LZMA_FINISH.
+ * It is enough to use only one of them (you can choose freely; use LZMA_RUN
+ * to support liblzma versions older than 5.0.0).
+ *
+ * \return      - LZMA_OK: Initialization succeeded, continue with lzma_code().
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_index_encoder(
+		lzma_stream *strm, const lzma_index *i)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Initialize .xz Index decoder
+ *
+ * \param       strm        Pointer to properly prepared lzma_stream
+ * \param       i           The decoded Index will be made available via
+ *                          this pointer. Initially this function will
+ *                          set *i to NULL (the old value is ignored). If
+ *                          decoding succeeds (lzma_code() returns
+ *                          LZMA_STREAM_END), *i will be set to point
+ *                          to a new lzma_index, which the application
+ *                          has to later free with lzma_index_end().
+ * \param       memlimit    How much memory the resulting lzma_index is
+ *                          allowed to require.
+ *
+ * The valid `action' values for lzma_code() are LZMA_RUN and LZMA_FINISH.
+ * It is enough to use only one of them (you can choose freely; use LZMA_RUN
+ * to support liblzma versions older than 5.0.0).
+ *
+ * \return      - LZMA_OK: Initialization succeeded, continue with lzma_code().
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_MEMLIMIT_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_index_decoder(
+		lzma_stream *strm, lzma_index **i, uint64_t memlimit)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Single-call .xz Index encoder
+ *
+ * \param       i         lzma_index to be encoded
+ * \param       out       Beginning of the output buffer
+ * \param       out_pos   The next byte will be written to out[*out_pos].
+ *                        *out_pos is updated only if encoding succeeds.
+ * \param       out_size  Size of the out buffer; the first byte into
+ *                        which no data is written to is out[out_size].
+ *
+ * \return      - LZMA_OK: Encoding was successful.
+ *              - LZMA_BUF_ERROR: Output buffer is too small. Use
+ *                lzma_index_size() to find out how much output
+ *                space is needed.
+ *              - LZMA_PROG_ERROR
+ *
+ * \note        This function doesn't take allocator argument since all
+ *              the internal data is allocated on stack.
+ */
+extern LZMA_API(lzma_ret) lzma_index_buffer_encode(const lzma_index *i,
+		uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow;
+
+
+/**
+ * \brief       Single-call .xz Index decoder
+ *
+ * \param       i           If decoding succeeds, *i will point to a new
+ *                          lzma_index, which the application has to
+ *                          later free with lzma_index_end(). If an error
+ *                          occurs, *i will be NULL. The old value of *i
+ *                          is always ignored and thus doesn't need to be
+ *                          initialized by the caller.
+ * \param       memlimit    Pointer to how much memory the resulting
+ *                          lzma_index is allowed to require. The value
+ *                          pointed by this pointer is modified if and only
+ *                          if LZMA_MEMLIMIT_ERROR is returned.
+ * \param       allocator   Pointer to lzma_allocator, or NULL to use malloc()
+ * \param       in          Beginning of the input buffer
+ * \param       in_pos      The next byte will be read from in[*in_pos].
+ *                          *in_pos is updated only if decoding succeeds.
+ * \param       in_size     Size of the input buffer; the first byte that
+ *                          won't be read is in[in_size].
+ *
+ * \return      - LZMA_OK: Decoding was successful.
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_MEMLIMIT_ERROR: Memory usage limit was reached.
+ *                The minimum required memlimit value was stored to *memlimit.
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_index_buffer_decode(lzma_index **i,
+		uint64_t *memlimit, lzma_allocator *allocator,
+		const uint8_t *in, size_t *in_pos, size_t in_size)
+		lzma_nothrow;

winlibs/include/lzma/index_hash.h

@@ -0,0 +1,107 @@
+/**
+ * \file        lzma/index_hash.h
+ * \brief       Validate Index by using a hash function
+ *
+ * Hashing makes it possible to use constant amount of memory to validate
+ * Index of arbitrary size.
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+/**
+ * \brief       Opaque data type to hold the Index hash
+ */
+typedef struct lzma_index_hash_s lzma_index_hash;
+
+
+/**
+ * \brief       Allocate and initialize a new lzma_index_hash structure
+ *
+ * If index_hash is NULL, a new lzma_index_hash structure is allocated,
+ * initialized, and a pointer to it returned. If allocation fails, NULL
+ * is returned.
+ *
+ * If index_hash is non-NULL, it is reinitialized and the same pointer
+ * returned. In this case, return value cannot be NULL or a different
+ * pointer than the index_hash that was given as an argument.
+ */
+extern LZMA_API(lzma_index_hash *) lzma_index_hash_init(
+		lzma_index_hash *index_hash, lzma_allocator *allocator)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Deallocate lzma_index_hash structure
+ */
+extern LZMA_API(void) lzma_index_hash_end(
+		lzma_index_hash *index_hash, lzma_allocator *allocator)
+		lzma_nothrow;
+
+
+/**
+ * \brief       Add a new Record to an Index hash
+ *
+ * \param       index             Pointer to a lzma_index_hash structure
+ * \param       unpadded_size     Unpadded Size of a Block
+ * \param       uncompressed_size Uncompressed Size of a Block
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_DATA_ERROR: Compressed or uncompressed size of the
+ *                Stream or size of the Index field would grow too big.
+ *              - LZMA_PROG_ERROR: Invalid arguments or this function is being
+ *                used when lzma_index_hash_decode() has already been used.
+ */
+extern LZMA_API(lzma_ret) lzma_index_hash_append(lzma_index_hash *index_hash,
+		lzma_vli unpadded_size, lzma_vli uncompressed_size)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Decode and validate the Index field
+ *
+ * After telling the sizes of all Blocks with lzma_index_hash_append(),
+ * the actual Index field is decoded with this function. Specifically,
+ * once decoding of the Index field has been started, no more Records
+ * can be added using lzma_index_hash_append().
+ *
+ * This function doesn't use lzma_stream structure to pass the input data.
+ * Instead, the input buffer is specified using three arguments. This is
+ * because it matches better the internal APIs of liblzma.
+ *
+ * \param       index_hash      Pointer to a lzma_index_hash structure
+ * \param       in              Pointer to the beginning of the input buffer
+ * \param       in_pos          in[*in_pos] is the next byte to process
+ * \param       in_size         in[in_size] is the first byte not to process
+ *
+ * \return      - LZMA_OK: So far good, but more input is needed.
+ *              - LZMA_STREAM_END: Index decoded successfully and it matches
+ *                the Records given with lzma_index_hash_append().
+ *              - LZMA_DATA_ERROR: Index is corrupt or doesn't match the
+ *                information given with lzma_index_hash_append().
+ *              - LZMA_BUF_ERROR: Cannot progress because *in_pos >= in_size.
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_index_hash_decode(lzma_index_hash *index_hash,
+		const uint8_t *in, size_t *in_pos, size_t in_size)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Get the size of the Index field as bytes
+ *
+ * This is needed to verify the Backward Size field in the Stream Footer.
+ */
+extern LZMA_API(lzma_vli) lzma_index_hash_size(
+		const lzma_index_hash *index_hash)
+		lzma_nothrow lzma_attr_pure;

winlibs/include/lzma/lzma.h

@@ -0,0 +1,420 @@
+/**
+ * \file        lzma/lzma.h
+ * \brief       LZMA1 and LZMA2 filters
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/**
+ * \brief       LZMA1 Filter ID
+ *
+ * LZMA1 is the very same thing as what was called just LZMA in LZMA Utils,
+ * 7-Zip, and LZMA SDK. It's called LZMA1 here to prevent developers from
+ * accidentally using LZMA when they actually want LZMA2.
+ *
+ * LZMA1 shouldn't be used for new applications unless you _really_ know
+ * what you are doing. LZMA2 is almost always a better choice.
+ */
+#define LZMA_FILTER_LZMA1       LZMA_VLI_C(0x4000000000000001)
+
+/**
+ * \brief       LZMA2 Filter ID
+ *
+ * Usually you want this instead of LZMA1. Compared to LZMA1, LZMA2 adds
+ * support for LZMA_SYNC_FLUSH, uncompressed chunks (smaller expansion
+ * when trying to compress uncompressible data), possibility to change
+ * lc/lp/pb in the middle of encoding, and some other internal improvements.
+ */
+#define LZMA_FILTER_LZMA2       LZMA_VLI_C(0x21)
+
+
+/**
+ * \brief       Match finders
+ *
+ * Match finder has major effect on both speed and compression ratio.
+ * Usually hash chains are faster than binary trees.
+ *
+ * If you will use LZMA_SYNC_FLUSH often, the hash chains may be a better
+ * choice, because binary trees get much higher compression ratio penalty
+ * with LZMA_SYNC_FLUSH.
+ *
+ * The memory usage formulas are only rough estimates, which are closest to
+ * reality when dict_size is a power of two. The formulas are  more complex
+ * in reality, and can also change a little between liblzma versions. Use
+ * lzma_raw_encoder_memusage() to get more accurate estimate of memory usage.
+ */
+typedef enum {
+	LZMA_MF_HC3     = 0x03,
+		/**<
+		 * \brief       Hash Chain with 2- and 3-byte hashing
+		 *
+		 * Minimum nice_len: 3
+		 *
+		 * Memory usage:
+		 *  - dict_size <= 16 MiB: dict_size * 7.5
+		 *  - dict_size > 16 MiB: dict_size * 5.5 + 64 MiB
+		 */
+
+	LZMA_MF_HC4     = 0x04,
+		/**<
+		 * \brief       Hash Chain with 2-, 3-, and 4-byte hashing
+		 *
+		 * Minimum nice_len: 4
+		 *
+		 * Memory usage:
+		 *  - dict_size <= 32 MiB: dict_size * 7.5
+		 *  - dict_size > 32 MiB: dict_size * 6.5
+		 */
+
+	LZMA_MF_BT2     = 0x12,
+		/**<
+		 * \brief       Binary Tree with 2-byte hashing
+		 *
+		 * Minimum nice_len: 2
+		 *
+		 * Memory usage: dict_size * 9.5
+		 */
+
+	LZMA_MF_BT3     = 0x13,
+		/**<
+		 * \brief       Binary Tree with 2- and 3-byte hashing
+		 *
+		 * Minimum nice_len: 3
+		 *
+		 * Memory usage:
+		 *  - dict_size <= 16 MiB: dict_size * 11.5
+		 *  - dict_size > 16 MiB: dict_size * 9.5 + 64 MiB
+		 */
+
+	LZMA_MF_BT4     = 0x14
+		/**<
+		 * \brief       Binary Tree with 2-, 3-, and 4-byte hashing
+		 *
+		 * Minimum nice_len: 4
+		 *
+		 * Memory usage:
+		 *  - dict_size <= 32 MiB: dict_size * 11.5
+		 *  - dict_size > 32 MiB: dict_size * 10.5
+		 */
+} lzma_match_finder;
+
+
+/**
+ * \brief       Test if given match finder is supported
+ *
+ * Return true if the given match finder is supported by this liblzma build.
+ * Otherwise false is returned. It is safe to call this with a value that
+ * isn't listed in lzma_match_finder enumeration; the return value will be
+ * false.
+ *
+ * There is no way to list which match finders are available in this
+ * particular liblzma version and build. It would be useless, because
+ * a new match finder, which the application developer wasn't aware,
+ * could require giving additional options to the encoder that the older
+ * match finders don't need.
+ */
+extern LZMA_API(lzma_bool) lzma_mf_is_supported(lzma_match_finder match_finder)
+		lzma_nothrow lzma_attr_const;
+
+
+/**
+ * \brief       Compression modes
+ *
+ * This selects the function used to analyze the data produced by the match
+ * finder.
+ */
+typedef enum {
+	LZMA_MODE_FAST = 1,
+		/**<
+		 * \brief       Fast compression
+		 *
+		 * Fast mode is usually at its best when combined with
+		 * a hash chain match finder.
+		 */
+
+	LZMA_MODE_NORMAL = 2
+		/**<
+		 * \brief       Normal compression
+		 *
+		 * This is usually notably slower than fast mode. Use this
+		 * together with binary tree match finders to expose the
+		 * full potential of the LZMA1 or LZMA2 encoder.
+		 */
+} lzma_mode;
+
+
+/**
+ * \brief       Test if given compression mode is supported
+ *
+ * Return true if the given compression mode is supported by this liblzma
+ * build. Otherwise false is returned. It is safe to call this with a value
+ * that isn't listed in lzma_mode enumeration; the return value will be false.
+ *
+ * There is no way to list which modes are available in this particular
+ * liblzma version and build. It would be useless, because a new compression
+ * mode, which the application developer wasn't aware, could require giving
+ * additional options to the encoder that the older modes don't need.
+ */
+extern LZMA_API(lzma_bool) lzma_mode_is_supported(lzma_mode mode)
+		lzma_nothrow lzma_attr_const;
+
+
+/**
+ * \brief       Options specific to the LZMA1 and LZMA2 filters
+ *
+ * Since LZMA1 and LZMA2 share most of the code, it's simplest to share
+ * the options structure too. For encoding, all but the reserved variables
+ * need to be initialized unless specifically mentioned otherwise.
+ * lzma_lzma_preset() can be used to get a good starting point.
+ *
+ * For raw decoding, both LZMA1 and LZMA2 need dict_size, preset_dict, and
+ * preset_dict_size (if preset_dict != NULL). LZMA1 needs also lc, lp, and pb.
+ */
+typedef struct {
+	/**
+	 * \brief       Dictionary size in bytes
+	 *
+	 * Dictionary size indicates how many bytes of the recently processed
+	 * uncompressed data is kept in memory. One method to reduce size of
+	 * the uncompressed data is to store distance-length pairs, which
+	 * indicate what data to repeat from the dictionary buffer. Thus,
+	 * the bigger the dictionary, the better the compression ratio
+	 * usually is.
+	 *
+	 * Maximum size of the dictionary depends on multiple things:
+	 *  - Memory usage limit
+	 *  - Available address space (not a problem on 64-bit systems)
+	 *  - Selected match finder (encoder only)
+	 *
+	 * Currently the maximum dictionary size for encoding is 1.5 GiB
+	 * (i.e. (UINT32_C(1) << 30) + (UINT32_C(1) << 29)) even on 64-bit
+	 * systems for certain match finder implementation reasons. In the
+	 * future, there may be match finders that support bigger
+	 * dictionaries.
+	 *
+	 * Decoder already supports dictionaries up to 4 GiB - 1 B (i.e.
+	 * UINT32_MAX), so increasing the maximum dictionary size of the
+	 * encoder won't cause problems for old decoders.
+	 *
+	 * Because extremely small dictionaries sizes would have unneeded
+	 * overhead in the decoder, the minimum dictionary size is 4096 bytes.
+	 *
+	 * \note        When decoding, too big dictionary does no other harm
+	 *              than wasting memory.
+	 */
+	uint32_t dict_size;
+#	define LZMA_DICT_SIZE_MIN       UINT32_C(4096)
+#	define LZMA_DICT_SIZE_DEFAULT   (UINT32_C(1) << 23)
+
+	/**
+	 * \brief       Pointer to an initial dictionary
+	 *
+	 * It is possible to initialize the LZ77 history window using
+	 * a preset dictionary. It is useful when compressing many
+	 * similar, relatively small chunks of data independently from
+	 * each other. The preset dictionary should contain typical
+	 * strings that occur in the files being compressed. The most
+	 * probable strings should be near the end of the preset dictionary.
+	 *
+	 * This feature should be used only in special situations. For
+	 * now, it works correctly only with raw encoding and decoding.
+	 * Currently none of the container formats supported by
+	 * liblzma allow preset dictionary when decoding, thus if
+	 * you create a .xz or .lzma file with preset dictionary, it
+	 * cannot be decoded with the regular decoder functions. In the
+	 * future, the .xz format will likely get support for preset
+	 * dictionary though.
+	 */
+	const uint8_t *preset_dict;
+
+	/**
+	 * \brief       Size of the preset dictionary
+	 *
+	 * Specifies the size of the preset dictionary. If the size is
+	 * bigger than dict_size, only the last dict_size bytes are
+	 * processed.
+	 *
+	 * This variable is read only when preset_dict is not NULL.
+	 * If preset_dict is not NULL but preset_dict_size is zero,
+	 * no preset dictionary is used (identical to only setting
+	 * preset_dict to NULL).
+	 */
+	uint32_t preset_dict_size;
+
+	/**
+	 * \brief       Number of literal context bits
+	 *
+	 * How many of the highest bits of the previous uncompressed
+	 * eight-bit byte (also known as `literal') are taken into
+	 * account when predicting the bits of the next literal.
+	 *
+	 * E.g. in typical English text, an upper-case letter is
+	 * often followed by a lower-case letter, and a lower-case
+	 * letter is usually followed by another lower-case letter.
+	 * In the US-ASCII character set, the highest three bits are 010
+	 * for upper-case letters and 011 for lower-case letters.
+	 * When lc is at least 3, the literal coding can take advantage of
+	 * this property in the uncompressed data.
+	 *
+	 * There is a limit that applies to literal context bits and literal
+	 * position bits together: lc + lp <= 4. Without this limit the
+	 * decoding could become very slow, which could have security related
+	 * results in some cases like email servers doing virus scanning.
+	 * This limit also simplifies the internal implementation in liblzma.
+	 *
+	 * There may be LZMA1 streams that have lc + lp > 4 (maximum possible
+	 * lc would be 8). It is not possible to decode such streams with
+	 * liblzma.
+	 */
+	uint32_t lc;
+#	define LZMA_LCLP_MIN    0
+#	define LZMA_LCLP_MAX    4
+#	define LZMA_LC_DEFAULT  3
+
+	/**
+	 * \brief       Number of literal position bits
+	 *
+	 * lp affects what kind of alignment in the uncompressed data is
+	 * assumed when encoding literals. A literal is a single 8-bit byte.
+	 * See pb below for more information about alignment.
+	 */
+	uint32_t lp;
+#	define LZMA_LP_DEFAULT  0
+
+	/**
+	 * \brief       Number of position bits
+	 *
+	 * pb affects what kind of alignment in the uncompressed data is
+	 * assumed in general. The default means four-byte alignment
+	 * (2^ pb =2^2=4), which is often a good choice when there's
+	 * no better guess.
+	 *
+	 * When the aligment is known, setting pb accordingly may reduce
+	 * the file size a little. E.g. with text files having one-byte
+	 * alignment (US-ASCII, ISO-8859-*, UTF-8), setting pb=0 can
+	 * improve compression slightly. For UTF-16 text, pb=1 is a good
+	 * choice. If the alignment is an odd number like 3 bytes, pb=0
+	 * might be the best choice.
+	 *
+	 * Even though the assumed alignment can be adjusted with pb and
+	 * lp, LZMA1 and LZMA2 still slightly favor 16-byte alignment.
+	 * It might be worth taking into account when designing file formats
+	 * that are likely to be often compressed with LZMA1 or LZMA2.
+	 */
+	uint32_t pb;
+#	define LZMA_PB_MIN      0
+#	define LZMA_PB_MAX      4
+#	define LZMA_PB_DEFAULT  2
+
+	/** Compression mode */
+	lzma_mode mode;
+
+	/**
+	 * \brief       Nice length of a match
+	 *
+	 * This determines how many bytes the encoder compares from the match
+	 * candidates when looking for the best match. Once a match of at
+	 * least nice_len bytes long is found, the encoder stops looking for
+	 * better candidates and encodes the match. (Naturally, if the found
+	 * match is actually longer than nice_len, the actual length is
+	 * encoded; it's not truncated to nice_len.)
+	 *
+	 * Bigger values usually increase the compression ratio and
+	 * compression time. For most files, 32 to 128 is a good value,
+	 * which gives very good compression ratio at good speed.
+	 *
+	 * The exact minimum value depends on the match finder. The maximum
+	 * is 273, which is the maximum length of a match that LZMA1 and
+	 * LZMA2 can encode.
+	 */
+	uint32_t nice_len;
+
+	/** Match finder ID */
+	lzma_match_finder mf;
+
+	/**
+	 * \brief       Maximum search depth in the match finder
+	 *
+	 * For every input byte, match finder searches through the hash chain
+	 * or binary tree in a loop, each iteration going one step deeper in
+	 * the chain or tree. The searching stops if
+	 *  - a match of at least nice_len bytes long is found;
+	 *  - all match candidates from the hash chain or binary tree have
+	 *    been checked; or
+	 *  - maximum search depth is reached.
+	 *
+	 * Maximum search depth is needed to prevent the match finder from
+	 * wasting too much time in case there are lots of short match
+	 * candidates. On the other hand, stopping the search before all
+	 * candidates have been checked can reduce compression ratio.
+	 *
+	 * Setting depth to zero tells liblzma to use an automatic default
+	 * value, that depends on the selected match finder and nice_len.
+	 * The default is in the range [4, 200] or so (it may vary between
+	 * liblzma versions).
+	 *
+	 * Using a bigger depth value than the default can increase
+	 * compression ratio in some cases. There is no strict maximum value,
+	 * but high values (thousands or millions) should be used with care:
+	 * the encoder could remain fast enough with typical input, but
+	 * malicious input could cause the match finder to slow down
+	 * dramatically, possibly creating a denial of service attack.
+	 */
+	uint32_t depth;
+
+	/*
+	 * Reserved space to allow possible future extensions without
+	 * breaking the ABI. You should not touch these, because the names
+	 * of these variables may change. These are and will never be used
+	 * with the currently supported options, so it is safe to leave these
+	 * uninitialized.
+	 */
+	uint32_t reserved_int1;
+	uint32_t reserved_int2;
+	uint32_t reserved_int3;
+	uint32_t reserved_int4;
+	uint32_t reserved_int5;
+	uint32_t reserved_int6;
+	uint32_t reserved_int7;
+	uint32_t reserved_int8;
+	lzma_reserved_enum reserved_enum1;
+	lzma_reserved_enum reserved_enum2;
+	lzma_reserved_enum reserved_enum3;
+	lzma_reserved_enum reserved_enum4;
+	void *reserved_ptr1;
+	void *reserved_ptr2;
+
+} lzma_options_lzma;
+
+
+/**
+ * \brief       Set a compression preset to lzma_options_lzma structure
+ *
+ * 0 is the fastest and 9 is the slowest. These match the switches -0 .. -9
+ * of the xz command line tool. In addition, it is possible to bitwise-or
+ * flags to the preset. Currently only LZMA_PRESET_EXTREME is supported.
+ * The flags are defined in container.h, because the flags are used also
+ * with lzma_easy_encoder().
+ *
+ * The preset values are subject to changes between liblzma versions.
+ *
+ * This function is available only if LZMA1 or LZMA2 encoder has been enabled
+ * when building liblzma.
+ *
+ * \return      On success, false is returned. If the preset is not
+ *              supported, true is returned.
+ */
+extern LZMA_API(lzma_bool) lzma_lzma_preset(
+		lzma_options_lzma *options, uint32_t preset) lzma_nothrow;

winlibs/include/lzma/stream_flags.h

@@ -0,0 +1,223 @@
+/**
+ * \file        lzma/stream_flags.h
+ * \brief       .xz Stream Header and Stream Footer encoder and decoder
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/**
+ * \brief       Size of Stream Header and Stream Footer
+ *
+ * Stream Header and Stream Footer have the same size and they are not
+ * going to change even if a newer version of the .xz file format is
+ * developed in future.
+ */
+#define LZMA_STREAM_HEADER_SIZE 12
+
+
+/**
+ * \brief       Options for encoding/decoding Stream Header and Stream Footer
+ */
+typedef struct {
+	/**
+	 * \brief       Stream Flags format version
+	 *
+	 * To prevent API and ABI breakages if new features are needed in
+	 * Stream Header or Stream Footer, a version number is used to
+	 * indicate which fields in this structure are in use. For now,
+	 * version must always be zero. With non-zero version, the
+	 * lzma_stream_header_encode() and lzma_stream_footer_encode()
+	 * will return LZMA_OPTIONS_ERROR.
+	 *
+	 * lzma_stream_header_decode() and lzma_stream_footer_decode()
+	 * will always set this to the lowest value that supports all the
+	 * features indicated by the Stream Flags field. The application
+	 * must check that the version number set by the decoding functions
+	 * is supported by the application. Otherwise it is possible that
+	 * the application will decode the Stream incorrectly.
+	 */
+	uint32_t version;
+
+	/**
+	 * \brief       Backward Size
+	 *
+	 * Backward Size must be a multiple of four bytes. In this Stream
+	 * format version, Backward Size is the size of the Index field.
+	 *
+	 * Backward Size isn't actually part of the Stream Flags field, but
+	 * it is convenient to include in this structure anyway. Backward
+	 * Size is present only in the Stream Footer. There is no need to
+	 * initialize backward_size when encoding Stream Header.
+	 *
+	 * lzma_stream_header_decode() always sets backward_size to
+	 * LZMA_VLI_UNKNOWN so that it is convenient to use
+	 * lzma_stream_flags_compare() when both Stream Header and Stream
+	 * Footer have been decoded.
+	 */
+	lzma_vli backward_size;
+#	define LZMA_BACKWARD_SIZE_MIN 4
+#	define LZMA_BACKWARD_SIZE_MAX (LZMA_VLI_C(1) << 34)
+
+	/**
+	 * \brief       Check ID
+	 *
+	 * This indicates the type of the integrity check calculated from
+	 * uncompressed data.
+	 */
+	lzma_check check;
+
+	/*
+	 * Reserved space to allow possible future extensions without
+	 * breaking the ABI. You should not touch these, because the
+	 * names of these variables may change.
+	 *
+	 * (We will never be able to use all of these since Stream Flags
+	 * is just two bytes plus Backward Size of four bytes. But it's
+	 * nice to have the proper types when they are needed.)
+	 */
+	lzma_reserved_enum reserved_enum1;
+	lzma_reserved_enum reserved_enum2;
+	lzma_reserved_enum reserved_enum3;
+	lzma_reserved_enum reserved_enum4;
+	lzma_bool reserved_bool1;
+	lzma_bool reserved_bool2;
+	lzma_bool reserved_bool3;
+	lzma_bool reserved_bool4;
+	lzma_bool reserved_bool5;
+	lzma_bool reserved_bool6;
+	lzma_bool reserved_bool7;
+	lzma_bool reserved_bool8;
+	uint32_t reserved_int1;
+	uint32_t reserved_int2;
+
+} lzma_stream_flags;
+
+
+/**
+ * \brief       Encode Stream Header
+ *
+ * \param       options     Stream Header options to be encoded.
+ *                          options->backward_size is ignored and doesn't
+ *                          need to be initialized.
+ * \param       out         Beginning of the output buffer of
+ *                          LZMA_STREAM_HEADER_SIZE bytes.
+ *
+ * \return      - LZMA_OK: Encoding was successful.
+ *              - LZMA_OPTIONS_ERROR: options->version is not supported by
+ *                this liblzma version.
+ *              - LZMA_PROG_ERROR: Invalid options.
+ */
+extern LZMA_API(lzma_ret) lzma_stream_header_encode(
+		const lzma_stream_flags *options, uint8_t *out)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Encode Stream Footer
+ *
+ * \param       options     Stream Footer options to be encoded.
+ * \param       out         Beginning of the output buffer of
+ *                          LZMA_STREAM_HEADER_SIZE bytes.
+ *
+ * \return      - LZMA_OK: Encoding was successful.
+ *              - LZMA_OPTIONS_ERROR: options->version is not supported by
+ *                this liblzma version.
+ *              - LZMA_PROG_ERROR: Invalid options.
+ */
+extern LZMA_API(lzma_ret) lzma_stream_footer_encode(
+		const lzma_stream_flags *options, uint8_t *out)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Decode Stream Header
+ *
+ * \param       options     Target for the decoded Stream Header options.
+ * \param       in          Beginning of the input buffer of
+ *                          LZMA_STREAM_HEADER_SIZE bytes.
+ *
+ * options->backward_size is always set to LZMA_VLI_UNKNOWN. This is to
+ * help comparing Stream Flags from Stream Header and Stream Footer with
+ * lzma_stream_flags_compare().
+ *
+ * \return      - LZMA_OK: Decoding was successful.
+ *              - LZMA_FORMAT_ERROR: Magic bytes don't match, thus the given
+ *                buffer cannot be Stream Header.
+ *              - LZMA_DATA_ERROR: CRC32 doesn't match, thus the header
+ *                is corrupt.
+ *              - LZMA_OPTIONS_ERROR: Unsupported options are present
+ *                in the header.
+ *
+ * \note        When decoding .xz files that contain multiple Streams, it may
+ *              make sense to print "file format not recognized" only if
+ *              decoding of the Stream Header of the _first_ Stream gives
+ *              LZMA_FORMAT_ERROR. If non-first Stream Header gives
+ *              LZMA_FORMAT_ERROR, the message used for LZMA_DATA_ERROR is
+ *              probably more appropriate.
+ *
+ *              For example, Stream decoder in liblzma uses LZMA_DATA_ERROR if
+ *              LZMA_FORMAT_ERROR is returned by lzma_stream_header_decode()
+ *              when decoding non-first Stream.
+ */
+extern LZMA_API(lzma_ret) lzma_stream_header_decode(
+		lzma_stream_flags *options, const uint8_t *in)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Decode Stream Footer
+ *
+ * \param       options     Target for the decoded Stream Header options.
+ * \param       in          Beginning of the input buffer of
+ *                          LZMA_STREAM_HEADER_SIZE bytes.
+ *
+ * \return      - LZMA_OK: Decoding was successful.
+ *              - LZMA_FORMAT_ERROR: Magic bytes don't match, thus the given
+ *                buffer cannot be Stream Footer.
+ *              - LZMA_DATA_ERROR: CRC32 doesn't match, thus the Stream Footer
+ *                is corrupt.
+ *              - LZMA_OPTIONS_ERROR: Unsupported options are present
+ *                in Stream Footer.
+ *
+ * \note        If Stream Header was already decoded successfully, but
+ *              decoding Stream Footer returns LZMA_FORMAT_ERROR, the
+ *              application should probably report some other error message
+ *              than "file format not recognized", since the file more likely
+ *              is corrupt (possibly truncated). Stream decoder in liblzma
+ *              uses LZMA_DATA_ERROR in this situation.
+ */
+extern LZMA_API(lzma_ret) lzma_stream_footer_decode(
+		lzma_stream_flags *options, const uint8_t *in)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Compare two lzma_stream_flags structures
+ *
+ * backward_size values are compared only if both are not
+ * LZMA_VLI_UNKNOWN.
+ *
+ * \return      - LZMA_OK: Both are equal. If either had backward_size set
+ *                to LZMA_VLI_UNKNOWN, backward_size values were not
+ *                compared or validated.
+ *              - LZMA_DATA_ERROR: The structures differ.
+ *              - LZMA_OPTIONS_ERROR: version in either structure is greater
+ *                than the maximum supported version (currently zero).
+ *              - LZMA_PROG_ERROR: Invalid value, e.g. invalid check or
+ *                backward_size.
+ */
+extern LZMA_API(lzma_ret) lzma_stream_flags_compare(
+		const lzma_stream_flags *a, const lzma_stream_flags *b)
+		lzma_nothrow lzma_attr_pure;

winlibs/include/lzma/version.h

@@ -0,0 +1,121 @@
+/**
+ * \file        lzma/version.h
+ * \brief       Version number
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/*
+ * Version number split into components
+ */
+#define LZMA_VERSION_MAJOR 5
+#define LZMA_VERSION_MINOR 0
+#define LZMA_VERSION_PATCH 4
+#define LZMA_VERSION_STABILITY LZMA_VERSION_STABILITY_STABLE
+
+#ifndef LZMA_VERSION_COMMIT
+#	define LZMA_VERSION_COMMIT ""
+#endif
+
+
+/*
+ * Map symbolic stability levels to integers.
+ */
+#define LZMA_VERSION_STABILITY_ALPHA 0
+#define LZMA_VERSION_STABILITY_BETA 1
+#define LZMA_VERSION_STABILITY_STABLE 2
+
+
+/**
+ * \brief       Compile-time version number
+ *
+ * The version number is of format xyyyzzzs where
+ *  - x = major
+ *  - yyy = minor
+ *  - zzz = revision
+ *  - s indicates stability: 0 = alpha, 1 = beta, 2 = stable
+ *
+ * The same xyyyzzz triplet is never reused with different stability levels.
+ * For example, if 5.1.0alpha has been released, there will never be 5.1.0beta
+ * or 5.1.0 stable.
+ *
+ * \note        The version number of liblzma has nothing to with
+ *              the version number of Igor Pavlov's LZMA SDK.
+ */
+#define LZMA_VERSION (LZMA_VERSION_MAJOR * UINT32_C(10000000) \
+		+ LZMA_VERSION_MINOR * UINT32_C(10000) \
+		+ LZMA_VERSION_PATCH * UINT32_C(10) \
+		+ LZMA_VERSION_STABILITY)
+
+
+/*
+ * Macros to construct the compile-time version string
+ */
+#if LZMA_VERSION_STABILITY == LZMA_VERSION_STABILITY_ALPHA
+#	define LZMA_VERSION_STABILITY_STRING "alpha"
+#elif LZMA_VERSION_STABILITY == LZMA_VERSION_STABILITY_BETA
+#	define LZMA_VERSION_STABILITY_STRING "beta"
+#elif LZMA_VERSION_STABILITY == LZMA_VERSION_STABILITY_STABLE
+#	define LZMA_VERSION_STABILITY_STRING ""
+#else
+#	error Incorrect LZMA_VERSION_STABILITY
+#endif
+
+#define LZMA_VERSION_STRING_C_(major, minor, patch, stability, commit) \
+		#major "." #minor "." #patch stability commit
+
+#define LZMA_VERSION_STRING_C(major, minor, patch, stability, commit) \
+		LZMA_VERSION_STRING_C_(major, minor, patch, stability, commit)
+
+
+/**
+ * \brief       Compile-time version as a string
+ *
+ * This can be for example "4.999.5alpha", "4.999.8beta", or "5.0.0" (stable
+ * versions don't have any "stable" suffix). In future, a snapshot built
+ * from source code repository may include an additional suffix, for example
+ * "4.999.8beta-21-g1d92". The commit ID won't be available in numeric form
+ * in LZMA_VERSION macro.
+ */
+#define LZMA_VERSION_STRING LZMA_VERSION_STRING_C( \
+		LZMA_VERSION_MAJOR, LZMA_VERSION_MINOR, \
+		LZMA_VERSION_PATCH, LZMA_VERSION_STABILITY_STRING, \
+		LZMA_VERSION_COMMIT)
+
+
+/* #ifndef is needed for use with windres (MinGW or Cygwin). */
+#ifndef LZMA_H_INTERNAL_RC
+
+/**
+ * \brief       Run-time version number as an integer
+ *
+ * Return the value of LZMA_VERSION macro at the compile time of liblzma.
+ * This allows the application to compare if it was built against the same,
+ * older, or newer version of liblzma that is currently running.
+ */
+extern LZMA_API(uint32_t) lzma_version_number(void)
+		lzma_nothrow lzma_attr_const;
+
+
+/**
+ * \brief       Run-time version as a string
+ *
+ * This function may be useful if you want to display which version of
+ * liblzma your application is currently using.
+ */
+extern LZMA_API(const char *) lzma_version_string(void)
+		lzma_nothrow lzma_attr_const;
+
+#endif

winlibs/include/lzma/vli.h

@@ -0,0 +1,166 @@
+/**
+ * \file        lzma/vli.h
+ * \brief       Variable-length integer handling
+ *
+ * In the .xz format, most integers are encoded in a variable-length
+ * representation, which is sometimes called little endian base-128 encoding.
+ * This saves space when smaller values are more likely than bigger values.
+ *
+ * The encoding scheme encodes seven bits to every byte, using minimum
+ * number of bytes required to represent the given value. Encodings that use
+ * non-minimum number of bytes are invalid, thus every integer has exactly
+ * one encoded representation. The maximum number of bits in a VLI is 63,
+ * thus the vli argument must be less than or equal to UINT64_MAX / 2. You
+ * should use LZMA_VLI_MAX for clarity.
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/**
+ * \brief       Maximum supported value of a variable-length integer
+ */
+#define LZMA_VLI_MAX (UINT64_MAX / 2)
+
+/**
+ * \brief       VLI value to denote that the value is unknown
+ */
+#define LZMA_VLI_UNKNOWN UINT64_MAX
+
+/**
+ * \brief       Maximum supported encoded length of variable length integers
+ */
+#define LZMA_VLI_BYTES_MAX 9
+
+/**
+ * \brief       VLI constant suffix
+ */
+#define LZMA_VLI_C(n) UINT64_C(n)
+
+
+/**
+ * \brief       Variable-length integer type
+ *
+ * Valid VLI values are in the range [0, LZMA_VLI_MAX]. Unknown value is
+ * indicated with LZMA_VLI_UNKNOWN, which is the maximum value of the
+ * underlaying integer type.
+ *
+ * lzma_vli will be uint64_t for the foreseeable future. If a bigger size
+ * is needed in the future, it is guaranteed that 2 * LZMA_VLI_MAX will
+ * not overflow lzma_vli. This simplifies integer overflow detection.
+ */
+typedef uint64_t lzma_vli;
+
+
+/**
+ * \brief       Validate a variable-length integer
+ *
+ * This is useful to test that application has given acceptable values
+ * for example in the uncompressed_size and compressed_size variables.
+ *
+ * \return      True if the integer is representable as VLI or if it
+ *              indicates unknown value.
+ */
+#define lzma_vli_is_valid(vli) \
+	((vli) <= LZMA_VLI_MAX || (vli) == LZMA_VLI_UNKNOWN)
+
+
+/**
+ * \brief       Encode a variable-length integer
+ *
+ * This function has two modes: single-call and multi-call. Single-call mode
+ * encodes the whole integer at once; it is an error if the output buffer is
+ * too small. Multi-call mode saves the position in *vli_pos, and thus it is
+ * possible to continue encoding if the buffer becomes full before the whole
+ * integer has been encoded.
+ *
+ * \param       vli       Integer to be encoded
+ * \param       vli_pos   How many VLI-encoded bytes have already been written
+ *                        out. When starting to encode a new integer in
+ *                        multi-call mode, *vli_pos must be set to zero.
+ *                        To use single-call encoding, set vli_pos to NULL.
+ * \param       out       Beginning of the output buffer
+ * \param       out_pos   The next byte will be written to out[*out_pos].
+ * \param       out_size  Size of the out buffer; the first byte into
+ *                        which no data is written to is out[out_size].
+ *
+ * \return      Slightly different return values are used in multi-call and
+ *              single-call modes.
+ *
+ *              Single-call (vli_pos == NULL):
+ *              - LZMA_OK: Integer successfully encoded.
+ *              - LZMA_PROG_ERROR: Arguments are not sane. This can be due
+ *                to too little output space; single-call mode doesn't use
+ *                LZMA_BUF_ERROR, since the application should have checked
+ *                the encoded size with lzma_vli_size().
+ *
+ *              Multi-call (vli_pos != NULL):
+ *              - LZMA_OK: So far all OK, but the integer is not
+ *                completely written out yet.
+ *              - LZMA_STREAM_END: Integer successfully encoded.
+ *              - LZMA_BUF_ERROR: No output space was provided.
+ *              - LZMA_PROG_ERROR: Arguments are not sane.
+ */
+extern LZMA_API(lzma_ret) lzma_vli_encode(lzma_vli vli, size_t *vli_pos,
+		uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow;
+
+
+/**
+ * \brief       Decode a variable-length integer
+ *
+ * Like lzma_vli_encode(), this function has single-call and multi-call modes.
+ *
+ * \param       vli       Pointer to decoded integer. The decoder will
+ *                        initialize it to zero when *vli_pos == 0, so
+ *                        application isn't required to initialize *vli.
+ * \param       vli_pos   How many bytes have already been decoded. When
+ *                        starting to decode a new integer in multi-call
+ *                        mode, *vli_pos must be initialized to zero. To
+ *                        use single-call decoding, set vli_pos to NULL.
+ * \param       in        Beginning of the input buffer
+ * \param       in_pos    The next byte will be read from in[*in_pos].
+ * \param       in_size   Size of the input buffer; the first byte that
+ *                        won't be read is in[in_size].
+ *
+ * \return      Slightly different return values are used in multi-call and
+ *              single-call modes.
+ *
+ *              Single-call (vli_pos == NULL):
+ *              - LZMA_OK: Integer successfully decoded.
+ *              - LZMA_DATA_ERROR: Integer is corrupt. This includes hitting
+ *                the end of the input buffer before the whole integer was
+ *                decoded; providing no input at all will use LZMA_DATA_ERROR.
+ *              - LZMA_PROG_ERROR: Arguments are not sane.
+ *
+ *              Multi-call (vli_pos != NULL):
+ *              - LZMA_OK: So far all OK, but the integer is not
+ *                completely decoded yet.
+ *              - LZMA_STREAM_END: Integer successfully decoded.
+ *              - LZMA_DATA_ERROR: Integer is corrupt.
+ *              - LZMA_BUF_ERROR: No input was provided.
+ *              - LZMA_PROG_ERROR: Arguments are not sane.
+ */
+extern LZMA_API(lzma_ret) lzma_vli_decode(lzma_vli *vli, size_t *vli_pos,
+		const uint8_t *in, size_t *in_pos, size_t in_size)
+		lzma_nothrow;
+
+
+/**
+ * \brief       Get the number of bytes required to encode a VLI
+ *
+ * \return      Number of bytes on success (1-9). If vli isn't valid,
+ *              zero is returned.
+ */
+extern LZMA_API(uint32_t) lzma_vli_size(lzma_vli vli)
+		lzma_nothrow lzma_attr_pure;

zim.hh

@@ -0,0 +1,24 @@
+#ifndef __ZIM_HH_INCLUDED__
+#define __ZIM_HH_INCLUDED__
+
+#ifdef MAKE_ZIM_SUPPORT
+
+#include "dictionary.hh"
+
+/// Support for the Zim dictionaries.
+namespace Zim {
+
+using std::vector;
+using std::string;
+
+vector< sptr< Dictionary::Class > > makeDictionaries(
+                                      vector< string > const & fileNames,
+                                      string const & indicesDir,
+                                      Dictionary::Initializing & )
+  throw( std::exception );
+
+}
+
+#endif
+
+#endif