uvg266/src/cli.c

/*****************************************************************************
 * This file is part of uvg266 VVC encoder.
 *
 * Copyright (c) 2021, Tampere University, ITU/ISO/IEC, project contributors
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 * 
 * * Redistributions of source code must retain the above copyright notice, this
 *   list of conditions and the following disclaimer.
 * 
 * * Redistributions in binary form must reproduce the above copyright notice, this
 *   list of conditions and the following disclaimer in the documentation and/or
 *   other materials provided with the distribution.
 * 
 * * Neither the name of the Tampere University or ITU/ISO/IEC nor the names of its
 *   contributors may be used to endorse or promote products derived from
 *   this software without specific prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
 ****************************************************************************/

/*
* \file
*
*/

#include "cli.h"

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <getopt.h>
#include <ctype.h>

static const char short_options[] = "i:o:d:n:q:p:r:";
static const struct option long_options[] = {
  { "input",              required_argument, NULL, 'i' },
  { "output",             required_argument, NULL, 'o' },
  { "debug",              required_argument, NULL, 'd' },
  { "frames",             required_argument, NULL, 'n' },
  { "qp",                 required_argument, NULL, 'q' },
  { "period",             required_argument, NULL, 'p' },
  { "ref",                required_argument, NULL, 'r' },
  { "vps-period",         required_argument, NULL, 0 },
  { "input-res",          required_argument, NULL, 0 },
  { "input-fps",          required_argument, NULL, 0 },
  { "lmcs",                     no_argument, NULL, 0 },
  { "deblock",            required_argument, NULL, 0 },
  { "no-deblock",               no_argument, NULL, 0 },
  { "sao",                required_argument, NULL, 0 },
  { "no-sao",                   no_argument, NULL, 0 },
  { "alf",                required_argument, NULL, 0 },
  { "no-alf",                   no_argument, NULL, 0 },
  { "rdoq",                     no_argument, NULL, 0 },
  { "no-rdoq",                  no_argument, NULL, 0 },
  { "signhide",                 no_argument, NULL, 0 },
  { "no-signhide",              no_argument, NULL, 0 },
  { "rd",                 required_argument, NULL, 0 },
  { "full-intra-search",        no_argument, NULL, 0 },
  { "no-full-intra-search",     no_argument, NULL, 0 },
  { "transform-skip",           no_argument, NULL, 0 },
  { "no-transform-skip",        no_argument, NULL, 0 },
  { "tr-skip-max-size",   required_argument, NULL, 0 },
  { "mts",                required_argument, NULL, 0 },
  { "no-mts",                   no_argument, NULL, 0 },
  { "tr-depth-intra",     required_argument, NULL, 0 },
  { "me",                 required_argument, NULL, 0 },
  { "subme",              required_argument, NULL, 0 },
  { "source-scan-type",   required_argument, NULL, 0 },
  { "sar",                required_argument, NULL, 0 },
  { "overscan",           required_argument, NULL, 0 },
  { "videoformat",        required_argument, NULL, 0 },
  { "range",              required_argument, NULL, 0 },
  { "colorprim",          required_argument, NULL, 0 },
  { "transfer",           required_argument, NULL, 0 },
  { "colormatrix",        required_argument, NULL, 0 },
  { "chromaloc",          required_argument, NULL, 0 },
  { "aud",                      no_argument, NULL, 0 },
  { "no-aud",                   no_argument, NULL, 0 },
  { "cqmfile",            required_argument, NULL, 0 },
  { "seek",               required_argument, NULL, 0 },
  { "tiles",              required_argument, NULL, 0 },
  { "tiles-width-split",  required_argument, NULL, 0 },
  { "tiles-height-split", required_argument, NULL, 0 },
  { "wpp",                      no_argument, NULL, 0 },
  { "no-wpp",                   no_argument, NULL, 0 },
  { "owf",                required_argument, NULL, 0 },
  { "slices",             required_argument, NULL, 0 },
  { "threads",            required_argument, NULL, 0 },
  { "cpuid",              optional_argument, NULL, 0 },
  { "no-cpuid",                 no_argument, NULL, 0 },
  { "pu-depth-inter",     required_argument, NULL, 0 },
  { "pu-depth-intra",     required_argument, NULL, 0 },
  { "info",                     no_argument, NULL, 0 },
  { "no-info",                  no_argument, NULL, 0 },
  { "gop",                required_argument, NULL, 0 },
  { "bipred",                   no_argument, NULL, 0 },
  { "no-bipred",                no_argument, NULL, 0 },
  { "bitrate",            required_argument, NULL, 0 },
  { "preset",             required_argument, NULL, 0 },
  { "mv-rdo",                   no_argument, NULL, 0 },
  { "no-mv-rdo",                no_argument, NULL, 0 },
  { "psnr",                     no_argument, NULL, 0 },
  { "no-psnr",                  no_argument, NULL, 0 },
  { "version",                  no_argument, NULL, 0 },
  { "help",                     no_argument, NULL, 0 },
  { "loop-input",               no_argument, NULL, 0 },
  { "mv-constraint",      required_argument, NULL, 0 },
  { "hash",               required_argument, NULL, 0 },
  {"cu-split-termination",required_argument, NULL, 0 },
  { "crypto",             required_argument, NULL, 0 },
  { "key",                required_argument, NULL, 0 },
  { "me-early-termination",required_argument, NULL, 0 },
  { "intra-rdo-et",             no_argument, NULL, 0 },
  { "no-intra-rdo-et",          no_argument, NULL, 0 },
  { "lossless",                 no_argument, NULL, 0 },
  { "no-lossless",              no_argument, NULL, 0 },
  { "tmvp",                     no_argument, NULL, 0 },
  { "no-tmvp",                  no_argument, NULL, 0 },
  { "rdoq-skip",                no_argument, NULL, 0 },
  { "no-rdoq-skip",             no_argument, NULL, 0 },
  { "input-bitdepth",     required_argument, NULL, 0 },
  { "input-format",       required_argument, NULL, 0 },
  { "implicit-rdpcm",           no_argument, NULL, 0 },
  { "no-implicit-rdpcm",        no_argument, NULL, 0 },
  { "roi",                required_argument, NULL, 0 },
  { "erp-aqp",                  no_argument, NULL, 0 },
  { "no-erp-aqp",               no_argument, NULL, 0 },
  { "level",              required_argument, NULL, 0 },
  { "force-level",        required_argument, NULL, 0 },
  { "high-tier",                no_argument, NULL, 0 },
  { "me-steps",           required_argument, NULL, 0 },
  { "roi-file",           required_argument, NULL, 0 },
  { "fast-residual-cost", required_argument, NULL, 0 },
  { "set-qp-in-cu",             no_argument, NULL, 0 },
  { "open-gop",                 no_argument, NULL, 0 },
  { "no-open-gop",              no_argument, NULL, 0 },
  { "vaq",                required_argument, NULL, 0 },
  { "no-vaq",                   no_argument, NULL, 0 },
  { "scaling-list",       required_argument, NULL, 0 },
  { "max-merge",          required_argument, NULL, 0 },
  { "early-skip",               no_argument, NULL, 0 },
  { "no-early-skip",            no_argument, NULL, 0 },
  { "ml-pu-depth-intra",        no_argument, NULL, 0 },
  { "partial-coding",     required_argument, NULL, 0 },
  { "zero-coeff-rdo",           no_argument, NULL, 0 },
  { "no-zero-coeff-rdo",        no_argument, NULL, 0 },
  { "intra-qp-offset",    required_argument, NULL, 0 },
  { "rc-algorithm",       required_argument, NULL, 0 },
  { "intra-bits",               no_argument, NULL, 0 },
  { "no-intra-bits",            no_argument, NULL, 0 },
  { "clip-neighbour",           no_argument, NULL, 0 },
  { "no-clip-neighbour",        no_argument, NULL, 0 },
  { "input-file-format",  required_argument, NULL, 0 },
  { "stats-file-prefix",  required_argument, NULL, 0 },
  { "fast-coeff-table",   required_argument, NULL, 0 },
  { "fastrd-sampling",          no_argument, NULL, 0 },
  { "fastrd-accuracy-check",    no_argument, NULL, 0 },
  { "fastrd-outdir",      required_argument, NULL, 0 },
  { "chroma-qp-in",       required_argument, NULL, 0 },
  { "chroma-qp-out",      required_argument, NULL, 0 },
  { "mrl",                      no_argument, NULL, 0 },
  { "no-mrl",                   no_argument, NULL, 0 },
  { "mip",                      no_argument, NULL, 0 },
  { "no-mip",                   no_argument, NULL, 0 },
  { "jccr",                     no_argument, NULL, 0 },
  { "no-jccr",                  no_argument, NULL, 0 },
  { "amvr",                     no_argument, NULL, 0 },
  { "no-amvr",                  no_argument, NULL, 0 },
  { "cclm",                     no_argument, NULL, 0 },
  { "no-cclm",                  no_argument, NULL, 0 },
  { "combine-intra-cus",        no_argument, NULL, 0 },
  { "no-combine-intra-cus",     no_argument, NULL, 0 },
  { "force-inter",              no_argument, NULL, 0 },
  { "no-force-inter",           no_argument, NULL, 0 },
  {0, 0, 0, 0}
};

/**
* \brief Try to detect resolution from file name automatically
*
* \param file_name    file name to get dimensions from
* \param out_width    detected width
* \param out_height   detected height
* \return      1 if the resolution is set, 0 on fail
*/
static int select_input_res_auto(const char *file_name, int32_t *out_width, int32_t *out_height)
{
  if (!file_name) return 0;

  // Find the last delimiter char ( / or \ ). Hope the other kind is not used in the name.
  // If delim is not found, set pointer to the beginning.
  unsigned char* sub_str = (unsigned char*)MAX(strrchr(file_name, '/'), strrchr(file_name, '\\'));
  if (!sub_str) sub_str = (unsigned char*)file_name;

  int success = 0;
  // Try if the substring starts with "<int>x<int>" without either of them being 0
  do {
    success = (sscanf((char*)sub_str, "%dx%d%*s", out_width, out_height) == 2);
    success &= (*out_width > 0 && *out_height > 0);
    // Move to the next char until a digit is found or the string ends
    do{
      ++sub_str;
    } while (*sub_str != 0 && !isdigit(*sub_str));
    // Continue until "<int>x<int>" is found or the string ends
  } while (*sub_str != 0 && !success);

  return success;
}

/**
* \brief Try to detect file format from file name automatically
*
* \param file_name    file name to get format from
* \return      0 (auto) if no format is detected, or id of the format
*/
static int detect_file_format(const char *file_name) {
  if (!file_name) return 0;

  // Find the last dot in the file name.
  // If delim is not found, return 0
  char* sub_str = (char*)strrchr(file_name, '.');
  if (!sub_str) return 0;
  if (strlen(sub_str) != 4) return 0;
  char ending_lower_case[4];
  for(int i = 0; i < 4; i++){
    ending_lower_case[i] = tolower(sub_str[i]);
  }

  // UVG_FILE_FORMAT
  if (strncmp(ending_lower_case, ".y4m", 4) == 0) return 1;
  else if (strncmp(ending_lower_case, ".yuv", 4) == 0) return 2;

  return 0;
}

/**
 * \brief Parse command line arguments.
 * \param argc  Number of arguments
 * \param argv  Argument list
 * \return      Pointer to the parsed options, or NULL on failure.
 */
cmdline_opts_t* cmdline_opts_parse(const uvg_api *const api, int argc, char *argv[])
{
  int ok = 1;
  cmdline_opts_t *opts = calloc(1, sizeof(cmdline_opts_t));
  if (!opts) {
    ok = 0;
    goto done;
  }

  opts->config = api->config_alloc();
  if (!opts->config || !api->config_init(opts->config)) {
    ok = 0;
    goto done;
  }

  // Parse command line options
  for (optind = 0;;) {
    int long_options_index = -1;

    int c = getopt_long(argc, argv, short_options, long_options, &long_options_index);
    if (c == -1)
      break;

    if (long_options_index < 0) {
      int i;
      for (i = 0; long_options[i].name; i++)
        if (long_options[i].val == c) {
            long_options_index = i;
            break;
        }
      if (long_options_index < 0) {
        // getopt_long already printed an error message
        ok = 0;
        goto done;
      }
    }

    const char* name = long_options[long_options_index].name;
    if (!strcmp(name, "input")) {
      if (opts->input) {
        fprintf(stderr, "Input error: More than one input file given.\n");
        ok = 0;
        goto done;
      }
      opts->input = strdup(optarg);
    } else if (!strcmp(name, "output")) {
      if (opts->output) {
        fprintf(stderr, "Input error: More than one output file given.\n");
        ok = 0;
        goto done;
      }
      opts->output = strdup(optarg);
    } else if (!strcmp(name, "debug")) {
      if (opts->debug) {
        fprintf(stderr, "Input error: More than one debug output file given.\n");
        ok = 0;
        goto done;
      }
      opts->debug = strdup(optarg);
    } else if (!strcmp(name, "seek")) {
      opts->seek = atoi(optarg);
    } else if (!strcmp(name, "frames")) {
      opts->frames = atoi(optarg);
    } else if (!strcmp(name, "version")) {
      opts->version = true;
      goto done;
    } else if (!strcmp(name, "help")) {
      opts->help = true;
      goto done;
    } else if (!strcmp(name, "loop-input")) {
      opts->loop_input = true;
    } else if (!api->config_parse(opts->config, name, optarg)) {
      fprintf(stderr, "invalid argument: %s=%s\n", name, optarg);
      ok = 0;
      goto done;
    }
  }

  // Check for extra arguments.
  if (argc - optind > 0) {
    fprintf(stderr, "Input error: Extra argument found: \"%s\"\n", argv[optind]);
    ok = 0;
    goto done;
  }

  // Check that the required files were defined
  if (opts->input == NULL || opts->output == NULL) {
    ok = 0;
    goto done;
  }

  if (opts->config->vps_period < 0) {
    // Disabling parameter sets is only possible when using Kvazaar as
    // a library.
    fprintf(stderr, "Input error: vps_period must be non-negative\n");
    ok = 0;
    goto done;
  }

  // Check the file name for format
  if (opts->config->file_format == UVG_FORMAT_AUTO) {
    opts->config->file_format = detect_file_format(opts->input);
  }

  // Set resolution automatically if necessary
  if ((opts->config->file_format == UVG_FORMAT_AUTO || opts->config->file_format == UVG_FORMAT_YUV)
      && opts->config->width == 0 && opts->config->height == 0) {
    ok = select_input_res_auto(opts->input, &opts->config->width, &opts->config->height);
    goto done;
  }

done:
  if (!ok) {
    cmdline_opts_free(api, opts);
    opts = NULL;
  }

  return opts;
}


/**
 * \brief Deallocate a cmdline_opts_t structure.
 */
void cmdline_opts_free(const uvg_api *const api, cmdline_opts_t *opts)
{
  if (opts) {
    FREE_POINTER(opts->input);
    FREE_POINTER(opts->output);
    FREE_POINTER(opts->debug);
    api->config_destroy(opts->config);
    opts->config = NULL;
  }
  FREE_POINTER(opts);
}


void print_usage(void)
{
  fprintf(stdout,
    "usage: -i and --input-res to set input, -o to set output\n"
    "              --help for more information\n");
}


void print_version(bool to_stderr)
{
  fprintf(to_stderr ? stderr : stdout,
    "uvg266 " VERSION_STRING " [" UVG_COMPILER_STRING "] " UVG_COMPILE_DATE "\n");
}


void print_help(void)
{
  fprintf(stdout,
    "Usage:\n"
    "uvg266 -i <input> --input-res <width>x<height> -o <output>\n"
    "\n"
    /* Word wrap to this width to stay under 80 characters (including ") *************/
    "Required:\n"
    "  -i, --input <filename>     : Input file\n"
    "      --input-res <res>      : Input resolution [auto]\n"
    "                                   - auto: Detect from file name.\n"
    "                                   - <int>x<int>: width times height\n"
    "  -o, --output <filename>    : Output file\n"
    "\n"
    /* Word wrap to this width to stay under 80 characters (including ") *************/
    "Presets:\n"
    "      --preset <preset>      : Set options to a preset [medium]\n"
    "                                   - ultrafast, superfast, veryfast, faster,\n"
    "                                     fast, medium, slow, slower, veryslow\n"
    "                                     placebo\n"
    "\n"
    /* Word wrap to this width to stay under 80 characters (including ") *************/
    "Input:\n"
    "  -n, --frames <integer>     : Number of frames to code [all]\n"
    "      --seek <integer>       : First frame to code [0]\n"
    "      --input-fps <num>[/<denom>] : Frame rate of the input video [25]\n"
    "      --source-scan-type <string> : Source scan type [progressive]\n"
    "                                   - progressive: Progressive scan\n"
    "                                   - tff: Top field first\n"
    "                                   - bff: Bottom field first\n"
    "      --input-format <string> : P420 or P400 [P420]\n"
    "      --input-bitdepth <int> : 8-16 [8]\n"
    "      --loop-input           : Re-read input file forever.\n"
    "      --input-file-format <string> : Input file format [auto]\n"
    "                                    - auto: Check the file ending for format\n"
    "                                    - y4m (skips frame headers)\n"
    "                                    - yuv\n"
    "\n"
    /* Word wrap to this width to stay under 80 characters (including ") *************/
    "Options:\n"
    "      --help                 : Print this help message and exit.\n"
    "      --version              : Print version information and exit.\n"
    "      --(no-)aud             : Use access unit delimiters. [disabled]\n"
    "      --debug <filename>     : Output internal reconstruction.\n"
    "      --(no-)cpuid           : Enable runtime CPU optimizations. [enabled]\n"
    "      --hash <string>        : Decoded picture hash [checksum]\n"
    "                                   - none: 0 bytes\n"
    "                                   - checksum: 18 bytes\n"
    "                                   - md5: 56 bytes\n"
    "      --(no-)psnr            : Calculate PSNR for frames. [enabled]\n"
    "      --(no-)info            : Add encoder info SEI. [enabled]\n"
    "      --stats-file-prefix    : A prefix used for stats files that include\n"
    "                               bits, lambda, distortion, and qp for each ctu.\n"
    "                               These are meant for debugging and are not\n"
    "                               written unless the prefix is defined.\n"
    "\n"
    /* Word wrap to this width to stay under 80 characters (including ") *************/
    "Video structure:\n"
    "  -q, --qp <integer>         : Quantization parameter [22]\n"
    "  -p, --period <integer>     : Period of intra pictures [64]\n"
    "                                   - 0: Only first picture is intra.\n"
    "                                   - 1: All pictures are intra.\n"
    "                                   - N: Every Nth picture is intra.\n"
    "      --vps-period <integer> : How often the video parameter set is re-sent [0]\n"
    "                                   - 0: Only send VPS with the first frame.\n"
    "                                   - N: Send VPS with every Nth intra frame.\n"
    "  -r, --ref <integer>        : Number of reference frames, in range 1..15 [4]\n"
    "      --gop <string>         : GOP structure [lp-g4d3t1]\n"
    "                                   -  0: Disabled\n"
    "                                   -  8: B-frame pyramid of length 8\n"
    "                                   - 16: B-frame pyramid of length 16\n"
    "                                   - lp-<string>: Low-delay P/B-frame GOP\n"
    "                                     (e.g. lp-g8d4t2, see README)\n"
    "      --intra-qp-offset <int>: QP offset for intra frames [-51..51] [auto]\n"
    "                                   - N: Set QP offset to N.\n"
    "                                   - auto: Select offset automatically based\n"
    "                                     on GOP length.\n"
    "      --(no-)open-gop        : Use open GOP configuration. [enabled]\n"
    "      --cqmfile <filename>   : Read custom quantization matrices from a file.\n"
    "      --scaling-list <string>: Set scaling list mode. [off]\n"
    "                                   - off: Disable scaling lists.\n"
    "                                   - custom: use custom list (with --cqmfile).\n"
    "                                   - default: Use default lists.\n"
    "      --bitrate <integer>    : Target bitrate [0]\n"
    "                                   - 0: Disable rate control.\n"
    "                                   - N: Target N bits per second.\n"
    "      --rc-algorithm <string>: Select used rc-algorithm. [lambda]\n"
    "                                   - lambda: rate control from:\n"
    "                                     DOI: 10.1109/TIP.2014.2336550 \n"
    "                                   - oba: DOI: 10.1109/TCSVT.2016.2589878\n"
    "      --(no-)intra-bits      : Use Hadamard cost based allocation for intra\n"
    "                               frames. Default on for gop 8 and off for lp-gop\n"
    "      --(no-)clip-neighbour  : On oba based rate control whether to clip \n"
    "                               lambda values to same frame's ctus or previous'.\n"
    "                               Default on for RA GOPS and disabled for LP.\n"
    "      --(no-)lossless        : Use lossless coding. [disabled]\n"
    "      --mv-constraint <string> : Constrain movement vectors. [none]\n"
    "                                   - none: No constraint\n"
    "                                   - frametile: Constrain within the tile.\n"
    "                                   - frametilemargin: Constrain even more.\n"
    "      --roi <filename>       : Use a delta QP map for region of interest.\n"
    "                               Reads an array of delta QP values from a file.\n"
    "                               Text and binary files are supported and detected\n"
    "                               from the file extension (.txt/.bin). If a known\n"
    "                               extension is not found, the file is treated as\n"
    "                               a text file. The file can include one or many\n"
    "                               ROI frames each in the following format:\n"
    "                               width and height of the QP delta map followed\n"
    "                               by width * height delta QP values in raster\n"
    "                               order. In binary format, width and height are\n"
    "                               32-bit integers whereas the delta QP values are\n"
    "                               signed 8-bit values. The map can be of any size\n"
    "                               and will be scaled to the video size. The file\n"
    "                               reading will loop if end of the file is reached.\n"
    "                               See roi.txt in the examples folder.\n"
    "      --set-qp-in-cu         : Set QP at CU level keeping pic_init_qp_minus26.\n"
    "                               in PPS and slice_qp_delta in slize header zero.\n"
    "      --(no-)erp-aqp         : Use adaptive QP for 360 degree video with\n"
    "                               equirectangular projection. [disabled]\n"
    "      --level <number>       : Use the given HEVC level in the output and give\n"
    "                               an error if level limits are exceeded. [6.2]\n"
    "                                   - 1, 2, 2.1, 3, 3.1, 4, 4.1, 5, 5.1, 5.2, 6,\n"
    "                                     6.1, 6.2\n"
    "      --force-level <number> : Same as --level but warnings instead of errors.\n"
    "      --high-tier            : Used with --level. Use high tier bitrate limits\n"
    "                               instead of the main tier limits during encoding.\n"
    "                               High tier requires level 4 or higher.\n"
    "      --(no-)vaq <integer>   : Enable variance adaptive quantization with given\n"
    "                               strength, in range 1..20. Recommended: 5.\n"
    "                               [disabled]\n"
    "      --chroma-qp-in         : List of input values used for mapping the luma\n"
    "                               QP into chroma qp. [17,27,32,44]\n"
    "      --chroma-qp-out        : List of output values used for mapping the luma\n"
    "                               QP into chroma qp. These two lists have to be\n"
    "                               same length, start with same value, and can\n"
    "                               contain maximum 16 or 36 - starting value\n"
    "                               elements. [17,27,32,44]\n"
    "\n"
    /* Word wrap to this width to stay under 80 characters (including ") *************/
    "Compression tools:\n"
    "      --(no-)deblock <beta:tc> : Deblocking filter. [0:0]\n"
    "                                   - beta: Between -6 and 6\n"
    "                                   - tc: Between -6 and 6\n"
    "      --sao <string>         : Sample Adaptive Offset [full]\n"
    "                                   - off: SAO disabled\n"
    "                                   - band: Band offset only\n"
    "                                   - edge: Edge offset only\n"
    "                                   - full: Full SAO\n"
    "      --alf <string>         : Adaptive Loop Filter [off]\n"
    "                                   - off: ALF disabled\n"
    "                                   - no-cc: ALF enabled without cross component\n"
    "                                            refinement\n"
    "                                   - full: Full ALF\n"
    "      --(no-)rdoq            : Rate-distortion optimized quantization [enabled]\n"
    "      --(no-)rdoq-skip       : Skip RDOQ for 4x4 blocks. [disabled]\n"
    "      --(no-)signhide        : Sign hiding [disabled]\n"
    "      --rd <integer>         : Intra mode search complexity [0]\n"
    "                                   - 0: Skip intra if inter is good enough.\n"
    "                                   - 1: Rough intra mode search with SATD.\n"
    "                                   - 2: Refine intra mode search with SSE.\n"
    "                                   - 3: Enable intra chroma mode search.\n"
    "                                   - 4: Try all intra modes.\n"
    "      --(no-)mv-rdo          : Rate-distortion optimized motion vector costs\n"
    "                               [disabled]\n"
    "      --(no-)zero-coeff-rdo  : If a CU is set inter, check if forcing zero\n"
    "                               residual improves the RD cost. [enabled]\n"
    "      --(no-)full-intra-search : Try all intra modes during rough search.\n"
    "                               [disabled]\n"
    "      --(no-)transform-skip  : Try transform skip [disabled]\n"
    "      --tr-skip-max-size     : Max log2 size of transform skip 2..5 [2]\n"
    "      --me <string>          : Integer motion estimation algorithm [hexbs]\n"
    "                                   - hexbs: Hexagon Based Search\n"
    "                                   - tz:    Test Zone Search\n"
    "                                   - full:  Full Search\n"
    "                                   - full8, full16, full32, full64\n"
    "                                   - dia:   Diamond Search\n"
    "      --me-steps <integer>   : Motion estimation search step limit. Only\n"
    "                               affects 'hexbs' and 'dia'. [-1]\n"
    "      --subme <integer>      : Fractional pixel motion estimation level [4]\n"
    "                                   - 0: Integer motion estimation only\n"
    "                                   - 1: + 1/2-pixel horizontal and vertical\n"
    "                                   - 2: + 1/2-pixel diagonal\n"
    "                                   - 3: + 1/4-pixel horizontal and vertical\n"
    "                                   - 4: + 1/4-pixel diagonal\n"
    "      --pu-depth-inter <int>-<int> : Inter prediction units sizes [0-3]\n"
    "                                   - 0, 1, 2, 3: from 64x64 to 8x8\n"
    "                                   - Accepts a list of values separated by ','\n"
    "                                     for setting separate depths per GOP layer\n"
    "                                     (values can be omitted to use the first\n"
    "                                     value for the respective layer).\n"
    "      --pu-depth-intra <int>-<int> : Intra prediction units sizes [1-4]\n"
    "                                   - 0, 1, 2, 3, 4: from 64x64 to 4x4\n"
    "                                   - Accepts a list of values separated by ','\n"
    "                                     for setting separate depths per GOP layer\n"
    "                                     (values can be omitted to use the first\n"
    "                                     value for the respective layer).\n"
    "      --ml-pu-depth-intra    : Predict the pu-depth-intra using machine\n"
    "                                learning trees, overrides the\n"
    "                                --pu-depth-intra parameter. [disabled]\n"
    "      --(no-)combine-intra-cus: Whether the encoder tries to code a cu\n"
    "                                   on lower depth even when search is not\n"
    "                                   performed on said depth. Should only\n"
    "                                   be disabled if cus absolutely must not\n"
    "                                   be larger than limited by the search.\n"
    "                                   [enabled]\n"
    "      --force-inter          : Force the encoder to use inter always.\n"
    "                               This is mostly for debugging and is not\n"
    "                               guaranteed to produce sensible bitstream or\n"
    "                               work at all. [disabled]\n"
    "      --tr-depth-intra <int> : Transform split depth for intra blocks [0]\n"
    "      --(no-)bipred          : Bi-prediction [disabled]\n"
    "      --cu-split-termination <string> : CU split search termination [zero]\n"
    "                                   - off: Don't terminate early.\n"
    "                                   - zero: Terminate when residual is zero.\n"
    "      --me-early-termination <string> : Motion estimation termination [on]\n"
    "                                   - off: Don't terminate early.\n"
    "                                   - on: Terminate early.\n"
    "                                   - sensitive: Terminate even earlier.\n"
    "      --fast-residual-cost <int> : Skip CABAC cost for residual coefficients\n"
    "                                   when QP is below the limit. [0]\n"
    "      --fast-coeff-table <string> : Read custom weights for residual\n"
    "                                    coefficients from a file instead of using\n"
    "                                    defaults [default]\n"
    "      --fast-rd-sampling : Enable learning data sampling for fast coefficient\n"
    "                           table generation\n"
    "      --fastrd-accuracy-check : Evaluate the accuracy of fast coefficient\n"
    "                                prediction\n"
    "      --fastrd-outdir : Directory to which to output sampled data or accuracy\n"
    "                        data, into <fastrd-outdir>/0.txt to 50.txt, one file\n"
    "                        for each QP that blocks were estimated on\n"
    "      --(no-)intra-rdo-et    : Check intra modes in rdo stage only until\n"
    "                               a zero coefficient CU is found. [disabled]\n"
    "      --(no-)early-skip      : Try to find skip cu from merge candidates.\n"
    "                               Perform no further search if skip is found.\n"
    "                               For rd = 0..1: Try the first candidate.\n"
    "                               For rd = 2.. : Try the best candidate based\n"
    "                                              on luma satd cost. [enabled]\n"
    "      --max-merge <integer>  : Maximum number of merge candidates, 1..6 [6]\n"
    "      --(no-)implicit-rdpcm  : Implicit residual DPCM. Currently only supported\n"
    "                               with lossless coding. [disabled]\n"
    "      --(no-)tmvp            : Temporal motion vector prediction [enabled]\n"
    "      --(no-)mrl             : Enable use of multiple reference lines in intra\n"
    "                               predictions.\n"
    "      --(no-)mip             : Enable matrix weighted intra prediction.\n"
    "      --mts <string>         : Multiple Transform Selection [off].\n"
    "                               (Currently only implemented for intra\n"
    "                               and has effect only when rd >= 2)\n"
    "                                   - off: MTS disabled\n"
    "                                   - intra: MTS applied only for intra blocks.\n"
    "                                   - inter: MTS applied only for inter blocks.\n"
    "                                   - both: MTS applied for both intra and inter\n"
    "                                           blocks.\n"
    "                                   - implicit: uses implicit MTS. Applies DST7\n"
    "                                               instead of DCT2 to certain intra\n
    "                                               blocks.\n"
    "      --(no-)jccr            : Joint coding of chroma residual.\n"
    "                               Requires rdo >= 2. [disabled]\n"
    "      --(no-)cclm            : Cross component linear model. \n"
    "                               Extra chroma prediction modes that are formed\n"
    "                               via linear transformation from the luma\n"
    "                               prediction. Requires rdo >= 3. [disabled\n"
    "      --(no-)amvr            : Adaptive Motion Vector Resolution.\n"
    "                               Code some MVs with reduced resolution [disabled]\n"
    "\n"
    /* Word wrap to this width to stay under 80 characters (including ") *************/
    "Parallel processing:\n"
    "      --threads <integer>    : Number of threads to use [auto]\n"
    "                                   - 0: Process everything with main thread.\n"
    "                                   - N: Use N threads for encoding.\n"
    "                                   - auto: Select automatically.\n"
    "      --owf <integer>        : Frame-level parallelism [auto]\n"
    "                                   - N: Process N+1 frames at a time.\n"
    "                                   - auto: Select automatically.\n"
    "      --(no-)wpp             : Wavefront parallel processing. [enabled]\n"
    "                               Enabling tiles automatically disables WPP.\n"
    "                               To enable WPP with tiles, re-enable it after\n"
    "                               enabling tiles. Enabling wpp with tiles is,\n"
    "                               however, an experimental feature since it is\n"
    "                               not supported in any HEVC profile.\n"
    "      --tiles <int>x<int>    : Split picture into width x height uniform tiles.\n"
    "      --tiles-width-split <string>|u<int> :\n"
    "                                   - <string>: A comma-separated list of tile\n"
    "                                               column pixel coordinates.\n"
    "                                   - u<int>: Number of tile columns of uniform\n"
    "                                             width.\n"
    "      --tiles-height-split <string>|u<int> :\n"
    "                                   - <string>: A comma-separated list of tile\n"
    "                                               row column pixel coordinates.\n"
    "                                   - u<int>: Number of tile rows of uniform\n"
    "                                             height.\n"
    "      --slices <string>      : Control how slices are used.\n"
    "                                   - tiles: Put tiles in independent slices.\n"
    "                                   - wpp: Put rows in dependent slices.\n"
    "                                   - tiles+wpp: Do both.\n"
    "      --partial-coding <x-offset>!<y-offset>!<slice-width>!<slice-height>\n"
    "                             : Encode partial frame.\n" 
    "                               Parts must be merged to form a valid bitstream.\n"
    "                               X and Y are CTU offsets.\n"
    "                               Slice width and height must be divisible by CTU\n"
    "                               in pixels unless it is the last CTU row/column.\n"
    "                               This parameter is used by kvaShare.\n"
    "\n"
    /* Word wrap to this width to stay under 80 characters (including ") *************/
    "Video Usability Information:\n"
    "      --sar <width:height>   : Specify sample aspect ratio\n"
    "      --overscan <string>    : Specify crop overscan setting [undef]\n"
    "                                   - undef, show, crop\n"
    "      --videoformat <string> : Specify video format [undef]\n"
    "                                   - undef, component, pal, ntsc, secam, mac\n"
    "      --range <string>       : Specify color range [tv]\n"
    "                                   - tv, pc\n"
    "      --colorprim <string>   : Specify color primaries [undef]\n"
    "                                   - undef, bt709, bt470m, bt470bg,\n"
    "                                     smpte170m, smpte240m, film, bt2020\n"
    "      --transfer <string>    : Specify transfer characteristics [undef]\n"
    "                                   - undef, bt709, bt470m, bt470bg,\n"
    "                                     smpte170m, smpte240m, linear, log100,\n"
    "                                     log316, iec61966-2-4, bt1361e,\n"
    "                                     iec61966-2-1, bt2020-10, bt2020-12\n"
    "      --colormatrix <string> : Specify color matrix setting [undef]\n"
    "                                   - undef, bt709, fcc, bt470bg, smpte170m,\n"
    "                                     smpte240m, GBR, YCgCo, bt2020nc, bt2020c\n"
    "      --chromaloc <integer>  : Specify chroma sample location (0 to 5) [0]\n"
    /* Word wrap to this width to stay under 80 characters (including ") *************/
    );
}


void print_frame_info(const uvg_frame_info *const info,
                      const double frame_psnr[3],
                      const uint32_t bytes,
                      const bool print_psnr,
                      const double avg_qp)
{
  fprintf(stderr, "POC %4d QP %2d AVG QP %.1f (%c-frame) %10d bits",
          info->poc,
          info->qp,
          avg_qp,
          "BPI"[info->slice_type % 3],
          bytes << 3);

  if (print_psnr) {
    fprintf(stderr, " PSNR Y %2.4f U %2.4f V %2.4f",
            frame_psnr[0], frame_psnr[1], frame_psnr[2]);
  }

  if (info->slice_type != UVG_SLICE_I) {
    // Print reference picture lists
    fprintf(stderr, " [L0 ");
    for (int j = 0; j < info->ref_list_len[0]; j++) {
      fprintf(stderr, "%d ", info->ref_list[0][j]);
    }
    fprintf(stderr, "] [L1 ");
    for (int j = 0; j < info->ref_list_len[1]; j++) {
      fprintf(stderr, "%d ", info->ref_list[1][j]);
    }
    fprintf(stderr, "]");
  }

  fprintf(stderr, "\n");
}