This encapsulates tiles or WPP rows into their own slices, making
it possible to send them as soon as they are done, instead of waiting
for the other substreams to finish and coding the substream offsets
in the slice header.
These fixes allow more than one slice to be used to code a picture.
- Use correct number of bits to code the slice segment address.
- Don't offset_len_minus1 for slices without substreams.
Appending to the child stream doesn't work is the child is a leaf
slice state.
Simplifies flow by removing distinction between tile and slice. Now
that slice headers are written in the parent stream, there is zero
difference between tiles and slices from bitstream point of view.
Having some of the termination bits in the LCU coding and some in the
substream finalization was needlessly confusing. Doing substream
finalization directly after LCU coding makes it easy to verify that the
finalization is done correctly.
Removes one job per WPP row from the job queue.
Removes kvz_cabac_flush, because I don't like bits being put into the
bitstream implicitly. Better to have it all in the open.
When the number of merge candidates was five, biprediction search would
read past the bounds of the priority list arrays. Fixed to limit the
search to the first four candidates.
- Checks the return value of fopen when opening the ROI file. Fixes
a segfault when the file cannot be opened.
- Check that the width and height are positive. Fixes reading past the
end of the delta QP array in kvz_set_lcu_lambda_and_qp.
- Check for overflow in width * height. Fixes an overflow resulting in
a segfault.
- Properly check that fscanf succeeds. Fixes silently accepting ROI
files that are too short.
- Properly close the FILE pointer.
The function search_pu_inter_ref incorrectly rounded the coordinates of
the block to down to a multiple 8 pixels. Small SMP and AMP blocks may
start at coordinates that are not multiples of 8. Fixed by removing the
rounding.
Fixes a failing assert when --mv-constraint is used with --smp or --amp.
Stops assuming that having cfg->gop_lowdelay set means that GOP
structure is used since it is possible that cfg->gop_lowdelay is true
but cfg->gop_len is zero. Adds checks for cfg->gop_len where needed.
Fixes a possible division by zero in kvz_encoder_feed_frame.
Drop a conditional for depth > MAX_DEPTH in search_cu. The depth cannot
be greater than MAX_DEPTH (== 3) since an earlier if-clause checks that
it is less than MAX_PU_DEPTH (== 4).
Subpixel motion estimation return 0-vector when no subpixel vector is
within the constraint. Fix is to not call subpixel motion estimation
when the integer vector is not within the constraint.
Rename and reorder everything to make more sense.
- Moved input tables into their own struct and renamed them to what
they actually represent.
- Renamed pretty much every variable to comform to our style and
to make sense.
- Removed the lastCG stuff, as the function already gets passed the
last coeff anyway. (it was named width, what the hell?)
This is to prepare for changing the code using the floating point table
to use the fixed point table instead.
This also allows reducing the size of the fractional part, which was
useful for finding every place where the the fixed point presentation
is relied upon.
Changes luma deblocking to use gather and scatter instead of reading
to and writing from here and there in memory. Should make them
faster and easier to vectorize, or at least cleaner.
Splits strong and weak luma deblocking to two functions, as they have
almost nothing in common.
Adds field lcu_stats to encoder_state_config_frame_t. The following data
is recorded for each LCU:
- number of bits
- squared cost
- used lambda value
- alpha parameter used for rate control
- beta parameter used for rate control
When rate control is enabled, enable cu_qp_delta_enabled_flag in PPS
with diff_cu_qp_delta_depth set to 0. Also adds code for writing the QP
deltas and a new cabac context.
Adds fields lambda, lambda_sqrt and qp to encoder_state_t. Drops field
cur_lambda_cost_sqrt from encoder_state_config_frame_t and renames
cur_lambda_cost to lambda.
- Defines MIN_LAMBDA and MAX_LAMBDA constants.
- Moves resetting state->frame->cur_gop_bits_coded to rate_control.c.
- Changes gop_allocate_bits to return the number of bits allocated like
pic_allocate_bits does.
When --threads=auto was given on the command line, cfg->threads was
actually set to zero, disabling threads altogether. Fixed to set
cfg->threads to -1, so that the number of threads is chosen
automatically.
The CABAC engine only writes to the bitstream when it has a full byte.
These writes are also always byte-aligned, so there is no need to even
check for stream alignment.
Speedup was around 3% with ultrafast and low QP.
Enforce bit depth promised by --input-bitdepth to avoid crashes when
larger values are provided.
Do endianess byte swap for all bytes when the buffer gets extended
to multiple of 8 pixels, and not just the number of input pixels.
Don't swap bytes on a little-endian system.
- Reduce indentation to 6 spaces
- Word wrap everything to under 80 characters
- Remove defaults from options covered by presets
- Add a dash in front of argument descriptions
- Add --(no-) to names of parameters that accept it and remove mention
of enabling or disabling
- Add executable and scripts as a dependancy to make docs
This value is not represented in the HEVC bitstream, which is why it
was not set previously. FFmpeg sets and needs it however, so make the
CLI set it as well to make sure we handle it correctly.
The rd-complexity of slow presets is better with a less agressive GOP.
Adding the GOP as part of the preset improved BDRate enough, that it
didn't make sense anymore to have a veryslow target the best BDRate.
Instead, push that responsibility to placebo by making it a little bit
faster.
GOPs with depth 1 had the same structure as those with depth 2:
g4d3t1 = 3 2 3 1
g4d2t1 = 2 2 2 1
g4d1t1 = 2 2 2 1
It now results in the correct:
g4d1t1 = 1 1 1 1
Coding inter without GOP of any kind really isn't a very sensible
default. Defaulting to B-GOP of some kind would be more better,
but lp-gop is more robust for now.
Use the vectorized general SSE41 inter SAD in AVX reg_sad for shapes
for which we don't have AVX versions yet.
Also improves speed of --smp and --amp a lot. Got a 1.25x speedup for:
--preset=ultrafast -q 27 --gop=lp-g4d3r3t1 --me-early-termination=on --rd=1 --pu-depth-inter=1-3 --smp --amp
* Suite speed_tests:
-PASS inter_sad: 0.898M x reg_sad(64x63):x86_asm_avx (1000 ticks, 1.000 sec)
+PASS inter_sad: 2.503M x reg_sad(64x63):x86_asm_avx (1000 ticks, 1.000 sec)
-PASS inter_sad: 115.054M x reg_sad(1x1):x86_asm_avx (1000 ticks, 1.000 sec)
+PASS inter_sad: 133.577M x reg_sad(1x1):x86_asm_avx (1000 ticks, 1.000 sec)
Add implementations for these functions that process the image line by
line instead of using the 16x16 function to process block by block.
The 32x32 is around 30% faster, and 64x64 is around 15% faster,
on Haswell.
PASS inter_sad: 28.744M x reg_sad(32x32):x86_asm_avx (1014 ticks, 1.014 sec)
PASS inter_sad: 7.882M x reg_sad(64x64):x86_asm_avx (1014 ticks, 1.014 sec)
to
PASS inter_sad: 37.828M x reg_sad(32x32):x86_asm_avx (1014 ticks, 1.014 sec)
PASS inter_sad: 9.081M x reg_sad(64x64):x86_asm_avx (1014 ticks, 1.014 sec)
Arrange the decision tree such that there is only 3 branches on the
most common paths and the more likely branch is always fall-through.
A profile guided optimization pass would probably do something similar.
A lot of time is being taken up by this function on ultrafast, and it
doesn't do a very good job. This change aims to both simplify the
logic and make the estimate better.
The logic is simplified by using a look up for the step mvd bit cost
step function instead of mimicking the binarization process. The
estimation is made better by checking fractional cabac bit costs.
The new function returns the same results as
kvz_get_mvd_coding_cost_cabac, but is also faster than the old
function.
Write bitstream without chroma when encoding with --input-format=P400.
This reduces bitstream size by 0-1 %, compared to coding monochrome in
420 format, and speeds up encoding slightly due to not processing
chroma.
