Author	SHA1	Message	Date
Enrico Weigelt, metux IT consult	b37fd20a2d	hurd: build every Hurd-capable X server by default in CI ... The GNU/Hurd lane added earlier built only the virtual DDXes (Xvfb + Xnest). The other servers that build on GNU/Hurd have since been confirmed in CI, so make them all part of the lane's FATAL build, in one meson run in the existing xserver-build-hurd job (parallel with the other platform lanes, no separate workflow; ~12 min in the VM): - Xvfb, Xnest virtual DDXes - Xorg the physical xfree86 server (libpciaccess has a Hurd backend, so the PCI layer configures/links) - Xephyr kdrive server running as an X client over XCB - glx the GLX extension (builds without libdrm) A regression breaking any of them now fails CI. All five link cleanly (hw/xfree86/Xorg, hw/kdrive/ephyr/Xephyr, hw/vfb/Xvfb, hw/xnest/Xnest, hw/xfree86/dixmods/libglx.so). Kept off because Hurd has no DRM kernel interface: - dri1/dri2/dri3 — libdrm's <drm.h> pulls a nonexistent mach/x86_64/ioccom.h - glamor — glamor_egl.c needs DRM_FORMAT_MOD_INVALID + GBM, and GBM needs DRM; confirmed non-buildable on Hurd And Xfbdev (kdrive fbdev): it builds hw/kdrive/linux, which needs Linux VTs (<linux/vt.h>) and would require a dedicated Hurd kdrive backend. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-07-01 09:57:08 +02:00
Enrico Weigelt, metux IT consult	18d94c4ced	.github: add GNU/Hurd VM build lane (Xvfb + Xnest) ... There is no vmactions GNU/Hurd VM, so this hand-rolls one on the ubuntu runner: it fetches Debian's pre-installed Hurd amd64 image, injects an ssh key and routes the guest console to serial, then boots it in QEMU and builds the X server inside via ssh. Key gotchas baked into the scripts: - The amd64 Hurd image uses rumpdisk for SATA, so the disk must be attached via q35 + an ich9-ahci AHCI controller (the default i440fx IDE disk yields an ext2fs I/O error and never boots). - gnumach only boots single-CPU (no -smp). - GRUB and gnumach log to VGA only; the grub.cfg is patched to add a serial console so the boot is visible under -nographic. - /dev/kvm exists on GH runners but isn't accessible to the runner user; chmod 666 it (falls back to TCG if unavailable). - VM boot can flake transiently, so boot is retried up to 3x. Inside the VM the toolchain (git, meson, ninja, pkg-config) install is fatal; the X protocol libs are best-effort, and the server is configured for the parts that build on Hurd today: -Dxvfb=true -Dxnest=true with xorg/xephyr/glx/dri/udev/logind disabled. Runs in ~10.5 min and is wired into the primary "Build X servers" workflow alongside the other platform lanes. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-30 14:08:02 +02:00
Enrico Weigelt, metux IT consult	9a1618d66d	.github: add RHEL build job ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-30 09:07:54 +02:00
Enrico Weigelt, metux IT consult	171a1ac3ce	test: retry the XTS suite on timeout instead of just failing ... The xvfb and xephyr-glamor XTS suites on llvmpipe occasionally *hang* — a single subtest wedges and meson kills it at the suite timeout, reported as a per-test TIMEOUT (SIGTERM), e.g. "Ok: 15, Fail: 0, Timeout: 1". That is a flake, not a real failure, and raising the timeout would only delay it. Wrap `meson test` in a timeout-aware retry: on a TIMEOUT, re-run the tests with --no-rebuild (the existing build is reused, no recompile) for up to 3 attempts. A genuine failure (no TIMEOUT in the log) is not retried and fails the job immediately, so real regressions are never masked. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-26 21:35:23 +02:00
Enrico Weigelt, metux IT consult	86ab67a794	ci: bump go-x11proto test dependency to v0.0.4 ... v0.0.4 fixes a "send on closed channel" race in the go-x11proto client's event read loop (eventCh/errorCh closed by Close() while readLoop was still delivering an event), which surfaced as intermittent go-xts CI failures (e.g. TestXSettingsWatch). Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-26 21:34:40 +02:00
Enrico Weigelt, metux IT consult	d7d81b8bce	.github: add gentoo job ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-26 18:48:28 +02:00
Enrico Weigelt, metux IT consult	d6662255a4	.github: add OpenBSD build ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-25 20:35:25 +02:00
Enrico Weigelt, metux IT consult	e94eab9cd5	.github: use go-x11proto test suite in the CI ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-25 20:16:15 +02:00
Enrico Weigelt, metux IT consult	29ce34c6fa	ci: add explicit test stage to cygwin build ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-25 19:23:33 +02:00
Enrico Weigelt, metux IT consult	1e824a563e	.github: add Solaris/Illumos build ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-25 19:19:21 +02:00
Enrico Weigelt, metux IT consult	c4252526cf	ci: make BSD VM build jobs resilient to transient failures ... The freebsd/netbsd/dragonfly jobs run in vmactions VMs whose boot and image provisioning flake transiently; a single hiccup aborted the whole run and had to be restarted by hand. The existing dragonfly retry was ineffective: it re-ran the VM action without tearing down attempt 1's leftover libvirt domain, so attempt 2 hit "Guest name 'dragonflybsd' is already in use" and timed out again. Two layers of hardening: - In-VM pkg installs (freebsd, dragonfly) now retry with backoff and an explicit catalogue refresh, so a transient mirror failure no longer fails the build (netbsd already had mirror fallback + curl --retry). - Each BSD VM step is retried up to 3x, with a new shared .github/actions/libvirt-cleanup composite action destroying the leftover domain + orphaned qemu between attempts. Only the final attempt can fail the job; a success short-circuits the rest. Rolled out to freebsd and netbsd too (previously single-attempt) and added timeout-minutes to bound a fully-broken job. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-25 15:00:36 +02:00
Enrico Weigelt, metux IT consult	c5e5b4d233	.github: netbsd: try several mirrors ... The default mirror (on fastly) fails regularily, so we have to try several ones, in order to prevent our whole pipeline from failing. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-19 19:24:57 +02:00
Enrico Weigelt, metux IT consult	7a9ae2966c	.github: add alpine build job ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-15 16:58:04 +02:00
Enrico Weigelt, metux IT consult	3415589c67	.github: retry-transient-failed: clean up old jobs ... wipe the old runs of this job, in order to prevent our job list being spammed by the that cron job. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-15 11:32:25 +02:00
Enrico Weigelt, metux IT consult	ff7ab3bd33	.github: job for automatically restarting jobs on transient failure ... Runs every 15 mins, checks for jobs with transient failure (job broke after 20mins) and automatically restarts those. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-06-12 13:04:59 +02:00
John Studnicka	ecede3875b	lint: Add .clang-tidy and analyzer scripts ... Signed-off-by: John Studnicka <contact@zentec.dev>	2026-05-26 12:15:17 +02:00
Enrico Weigelt, metux IT consult	2577cc1d1e	.github: ubuntu: use apt-cache also for *BSD builds ... also cache qemu et al. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-22 20:45:43 +02:00
Enrico Weigelt, metux IT consult	e1377cf2b2	.github: ubuntu: don't install wayland libs ... Xwayland is long gone, so no need for those anymore. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-22 19:27:20 +02:00
Enrico Weigelt, metux IT consult	1ef0db61c3	.github: ubuntu: fix apt cache ... The previous approach flooded the repository with new caches, thus leading to unnecessary eviction of other caches. Previously had splitted restore and save, but that required using separate keys, and github doesn't report partial cache hits (prefix-only), thus no chance of skipping unnecessary cache saves. Instead now moving out populating the cache into a separate job, which is run before all those who need the cache. This also allows us skipping `apt-get update` in the individual jobs, thus saving a bit more time. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-22 10:01:05 +02:00
Enrico Weigelt, metux IT consult	0005acde2d	.github: ubuntu: parallel driver build ... Parallel build of the drivers on Ubuntu target. Dependencies are built only once and taken from cache by the individual driver builds. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-20 14:44:02 +02:00
Enrico Weigelt, metux IT consult	777d0806a4	.github: use action "ubuntu-install-pkg" for all builds on Ubuntu ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-18 20:19:12 +02:00
Enrico Weigelt, metux IT consult	a7dc851e5d	.github: ubuntu-drivers: install Xserver to X11_PREFIX ... Install our own xserver build into X11_PREFIX (/home/runner/x11) instead of /usr. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-18 16:08:29 +02:00
Enrico Weigelt, metux IT consult	b5dbad8be3	.github: drivers/ubuntu: move xserver build into prereq script ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-15 21:42:25 +02:00
Enrico Weigelt, metux IT consult	bfdffa8f00	.github: ubuntu: install-pkg.sh: install extra packages ... Install some needed packages which are only installed on Github's VM images, but missing in Ubuntu containers. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-15 19:46:00 +02:00
Enrico Weigelt, metux IT consult	70f4ec5fd4	.github: move compile-drivers.sh under ubuntu/ ... It's only used on Ubuntu, so move it accordingly. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-15 19:11:22 +02:00
Enrico Weigelt, metux IT consult	d34e7983a5	.github: move install-prereq-drivers.sh under ubuntu/ ... It's only used on Ubuntu, so move it accordingly. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-15 19:03:47 +02:00
Enrico Weigelt, metux IT consult	cae899cd28	.github: conf.sh: drop messing with $PATH ... Not needed, and making trouble if conf.sh is included in the main xserver build scripts (tests are failing, probably because some wrong executables are called) Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-12 20:25:14 +02:00
Enrico Weigelt, metux IT consult	5c2d4aa0a9	.github: move refs for common dependencies into conf.sh ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-12 14:27:07 +02:00
Enrico Weigelt, metux IT consult	d4653fbd13	.github: move install-prereq.sh to ubuntu/ ... this script is only used for Ubuntu, so move it into according subdir. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-05-12 12:17:45 +02:00
NexusSfan	2ef865ba00	Fix #1482 ... Signed-off-by: NexusSfan <nexussfan@duck.com>	2026-04-20 20:21:55 +02:00
Enrico Weigelt, metux IT consult	cb5f2cd67e	.github: move run-xserver-build-and-test.sh under ubuntu/ subdir ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-02-18 11:22:21 +01:00
Enrico Weigelt, metux IT consult	6d6f2b3a98	.github: move some build & test pieces from pipeline to script ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-02-18 10:52:49 +01:00
Enrico Weigelt, metux IT consult	f5295b8d36	.github: update XTS ... use commit 6cf94400a09abecd6b86e4eb6441741acecd51f6 Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-02-16 16:43:13 +01:00
Enrico Weigelt, metux IT consult	922c4e2843	.github: update piglit ... Use piglit commit 59111996534f875ca88bce51f21fa2e6564895da. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-02-16 16:19:53 +01:00
Enrico Weigelt, metux IT consult	1d27e2878a	.github: build drivers against xorg-sdk without actual Xserver compile ... Use the new xorg-sdk build type instead of building a complete Xserver, to compile our drivers against. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-02-13 16:57:14 +01:00
Enrico Weigelt, metux IT consult	431082ba9f	.github: update xf86-video-v4l to 25.0.1 ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-01-30 17:12:24 +01:00
Enrico Weigelt, metux IT consult	86c6e75117	.github: increase xf86-video-intel version to 25.0.1 ... Upcoming work needs a few fixes in the Intel driver. (mainly not using internal EDID parser defines anymore) Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-01-27 15:44:34 +01:00
Enrico Weigelt, metux IT consult	a6d1bdcd3e	.github: util: add support for arbitrary refs to drv_tag() et al. ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2026-01-26 21:17:48 +01:00
b-aaz	b4f0ee1b59	Added Cygwin builds to CI. ... Bringing back Cygwin support! This will add Cygwin builds on windows-latest in our CI. Signed-off-by: b-aaz <b-aazbsd@proton.me>	2025-12-21 12:59:03 +01:00
Enrico Weigelt, metux IT consult	f40ebcd068	.github: compile-drivers: use new driver versions ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2025-12-19 15:37:26 +01:00
Enrico Weigelt, metux IT consult	e11e90cab6	.github: compile-drivers.sh: add xf86-video-v4l driver ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2025-12-16 18:48:36 +01:00
Enrico Weigelt, metux IT consult	2fcd226852	.github: util.sh: fix driver clone subdir ... missed the driver name from the driver clone subdir Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2025-12-16 18:39:18 +01:00
Enrico Weigelt, metux IT consult	e4fc8443be	.github: compile-drivers.sh: add xf86-video-trident driver ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2025-12-16 18:30:02 +01:00
Enrico Weigelt, metux IT consult	9d6750322d	.github: compile-drivers.sh: add xf86-video-suntcx driver ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2025-12-16 18:09:52 +01:00
Enrico Weigelt, metux IT consult	79c2e8de91	.github: compile-drivers.sh: add xf86-video-vbox driver ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2025-12-16 18:01:25 +01:00
Enrico Weigelt, metux IT consult	420ed84dc0	.github: compile-drivers.sh: add xf86-video-sunleo driver ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2025-12-16 17:50:21 +01:00
Enrico Weigelt, metux IT consult	a1b8860b53	.github: compile-drivers.sh: add xf86-video-sunffb driver ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2025-12-16 17:30:09 +01:00
Enrico Weigelt, metux IT consult	015a305c0b	.github: compile-drivers.sh: add xf86-video-freedreno driver ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2025-12-16 17:14:01 +01:00
Enrico Weigelt, metux IT consult	ff005de2a2	.github: compile-drivers.sh: add xf86-video-suncg6 driver ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2025-12-16 17:06:26 +01:00
Enrico Weigelt, metux IT consult	265560aa4f	.github: compile-drivers.sh: add xf86-video-tdfx driver ... Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>	2025-12-16 16:47:43 +01:00