Changes field state->tile->frame->cu_array->data to point to the CU
array in the main encoder state. Removes the need to copy the CU array
to the main CU array after search.
Inter costs are computed using SAD except when fractional motion
estimation or bi-prediction is enabled. This commit changes
search_pu_inter_ref to recalculate the cost with SATD. Fixes inter/intra
cost comparisons since intra costs are always SATD costs.
Changes function kvz_get_coeff_cost to only copy the CABAC contexts and
not the whole encoder state.
Other threads could be simultaneously using the other parts of the
encoder state. Only copying the CABAC fixes a TSan data race warning.
Adds alignment attribute to lcu_coeff_t. The coefficients are sometimes
handled as 64-bit integers containing four coefficients so the arrays
should be aligned to 8 bytes.
Fixes a UBSan error about misaligned reads.
Changes OWF selection so that it is chosen based on the maximum number
of parallel CTUs. Number of threads is limited to prevent overhead from
extra threads.
Drop pthread_cond_broadcast on threadqueue->cond in function
kvz_threadqueue_waitfor. The broadcast caused threads to be woken up
more often than necessary.
Changes encoder_state_init_new_frame to only call normalize_lcu_weights
when the weights have been written to the array and rate control is
enabled. When rate control is disabled, the weights are not used.
Adds field max_inter_ref_lcu to encoder_control_t. It is used to set up
inter-LCU dependencies in encoder_state_encode_leaf and restrict motion
vectors in fracmv_within_tile.
When using WPP and OWF, the first CTU of a row depends on the last CTU
of the row below in the reference frame. This is necessary when SAO is
enabled since we currently do SAO for a whole CTU row at a time. When
SAO is disabled, however, it is unnecessary to wait for the whole row.
Changes CTUs to depend only on the CTU below in the reference frame
instead of the whole row when WPP and OWF are enabled and SAO disabled.
Gives a significant speedup when running on a machine with many CPU
cores.
Moves SAO reconstruction into encoder_state_worker_encode_lcu instead of
doing it in a separate step for the whole CTU row. Reconstruction of the
rightmost 10 pixels and bottommost 10 pixels of a CTU is delayed until
the neighboring CTU has been deblocked.
Doing SAO for the whole CTU row at a time caused unnecessary inter-CTU
dependencies when using WPP and OWF. The first CTU of a row would need
to wait until SAO was done for the row below in the previous frame.
Moving SAO reconstruction to immediately after deblocking each CTU fixes
this problem.
Adds width and height parameters to function kvz_sao_reconstruct and
changes it to take coordinates in units of pixels. This will be useful
for doing SAO for areas smaller than a whole CTU.
AVX2 filter functions read pixels in chunks of 8 or 16 bytes. At the end
of the block, the read goes out of the bounds of the pixels array. The
extra pixels do not affect the result.
Fixes valgrind complaining about the invalid reads by allocating 5 extra
pixels in kvz_get_extended_block_avx2
With low delay GOP structure, it is possible to use an intra period that
is not a multiple of the GOP structure length. Commit 00c9f52 changed
encoder_state_init_new_frame to reset POC on intra frames. GOP offset,
however, was not reset, resulting in invalid POCs and references for the
following frames.
This commit changes function kvz_encoder_feed_frame so that GOP offset
is correctly reset on intra frames.
When closing the encoder, the pictures stored in the input frame buffer
are freed by repeatedly calling kvz_encoder_feed_frame. If the encoder
was closed immediately after opening it, kvz_encoder_feed_frame would be
called with an unprepared encoder state. This would trigger an assert.
Fixed by changing kvz_encoder_feed_frame so that it does not require the
encoder state to be prepared.
Sets max_transform_hierarchy_depth_inter to 0 in SPS. This saves some
bits because split_transform_flag does not need to be coded for inter
blocks.
When SMP and AMP blocks are enabled the depth is set to 1 instead.
Otherwise inter split flag would default to 1 for SMP and AMP blocks,
resulting in an unnecessary transform split.
Changes kvazaar_close to stop all threads before freeing encoder states.
Fixes a crash when the encoder is closed before all pictures have been
encoded.
Changes kvazaar_close to free the remaining pictures in the the input
frame buffer. Fixes a memory leak when the encoder is closed while there
are pictures left in the buffer.
Replaces function kvz_intra_recon_lcu_luma and
kvz_intra_recon_lcu_chroma in intra.c with function kvz_intra_recon_cu.
The new function can handle reconstruction for both luma and chroma.
Removes some duplicated code.
Moves code for intra leaf transform block reconstruction from functions
kvz_intra_recon_lcu_luma and kvz_intra_recon_lcu_chroma to a new
function intra_recon_tb_leaf. Removes some duplicated code.
Changes functions encode_intra_coding_unit and encode_coding_tree to
take coordinate arguments in units of luma pixels instead of 8 px
blocks. This should make the code easier to understand.
Changes functions encode_transform_unit and encode_transform_coeff to
take coordinate arguments in units of luma pixels instead of 4 px
blocks. This should make the code easier to understand.
When kvazaar was built with crypto++ but running without using
encryption features, kvazaar attempted to delete an uninitialized crypto
handle. Fixed by setting the handle to NULL in kvz_encoder_state_init.
A CryptoPP::CFB_Mode<CryptoPP::AES>::Encryption was allocated at the
beginning of encoder_state_encode_leaf and was never freed. This commit
changes encoder_state_worker_encode_lcu to delete the CFB_Mode. Also
moves crypto handle from encoder_state_config_tile_t to encoder_state_t
so that it can be safely deleted without affecting other threads in the
same tile.
Moves the inline declaration of intra_mode_encryption before the type
and changes it to use the INLINE macro. Inline declaration after type
triggered a warning on GCC.
Fixes the order of acquiring locks for the job and its dependency in
kvz_threadqueue_job_dep_add. The dependency is locked before the job
that depends on it. This is the same order as in threadqueue_worker.
Acquiring the locks in different order in kvz_threadqueue_job_dep_add
and threadqueue_worker would sometimes result in a deadlock.
When using --me-early-termination=sensitive, early termination of inter
search used to always return the starting point if no tested motion
vector was good enough to continue the search. This commit changes
early_termination to always return the best motion vector and cost
found.
Changes kvz_config_validate to output an error if the given QP is out of
range and changes kvz_set_picture_lambda_and_qp to clip the QP to the
valid range if is too large after applying QP offset from GOP structure.
Replaces functions kvz_quantize_lcu_luma_residual and
kvz_quantize_lcu_chroma_residual in transform.c with function
kvz_quantize_lcu_residual. The new function can handle any of the YUV
colors. Removes some duplicated code.
Changes the way coefficients are passed from kvz_search_lcu to
kvz_encode_coding_tree. Drops fields coeff_y, coeff_u and coeff_v in
videoframe_t and instead passes them through field coeff in
endoder_state_t.
Adds option --erp-aqp for enabling adaptive QP for 360 degree video with
equirectangular projection. When projected into a spherical surface,
the middle part of the video covers relatively larger area than the top
and bottom parts. Enabling --erp-aqp sets up a ROI delta QP array which
uses higher QPs for the top and bottom of the video and lower QPs for
the middle part.
Delta QPs for LCUs are enabled when either ROI coding or rate control is
enabled. Having a single field is simpler than always checking whether
ROI or rate control is enabled.
When video width or height was not a multiple of the smallest CU size,
no prediction would be performed at the border CUs. Kvazaar would later
crash at an assertion failure when attempting to write the bitstream for
the CU.
Fixed by permitting inter and intra prediction when the CU split is
forced, even if CUs of that size would otherwise be disabled.
When WPP is enabled, a reference to SAO reconstruction job is copied
from the wavefront to the main encoder state. However, when threads are
disabled, the job is a null pointer and dereferencing it crashes the
encoder. Fixed by adding a null pointer check.
Both the thread queue and the encoder states hold pointers to the thread
queue jobs. It is possible that a job is removed from the thread queue
and freed while the encoder state is still using it. This commit adds
reference counting to threadqueue_job_t in order to fix the problem.
Fixes#161.
Pthread mutexes were used for synchronization in encmain by locking and
unlocking them from different threads. However, according to the POSIX
standard, unlocking a mutex from a different thread is undefined
behaviour. This commit replaces the mutexes by semaphores which can be
used from different threads.
Following warning was given and is false positive
error: 'memset' used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size]
When the decoding and presentation orders of pictures are different
(with GOP), the frames in YUV debug output would be in the decoding
order. This commit changes the kvazaar command line program to store the
reconstructed pictures in a buffer so that they can be output in the
presentation order.
Fixes#101.
Adds struct merge_candidates_t for holding the spatial and temporal
merge candidates. Changes functions with separate parameters for each
candidate to use the struct instead.
Limits video size so that the number of luma and chroma pixels can be
stored in an int. Fixes some integer overflows that resulted in
segmentation faults.
Finalization functions for frame and tile encoder states accessed the
frame and tile fields of the encoder state even though they might be
NULL. This is the case when the initialization of an encoder state
fails. Fixed by adding NULL checks.
Some of the fields in encoder_control_t were simply copies of the
corresponding fields in kvz_config. This commit drops the copied fields
in favor of using the fields in encoder_control_t.cfg directly.
The kvz_config struct is created by the user but kvazaar keeps a pointer
to it. It is easy to break things by modifying the configuration outside
kvazaar. In addition, kvazaar modifies the struct even though it is has
a const modifier.
This commit changes the field cfg in encoder_control_t to be a copy of
the kvz_config struct instead of a pointer, removing modifications to
the const struct and allowing users to do whatever they want with it
after opening the encoder.
The end of slice was being calculated incorrectly, which led to no tile
being created inside the slice, which led to an assert triggering.
This fixes the wrong end of slice calculation, but also disallows
wavefront rows from being created, if there would be only one.
The wavefront initialization code assumes there are always more than
one row, so the inter-frame dependency doesn't get added properly.
Fixes#153.
Main thread was stuck looping on pthread_cond_timedwait because
the abs time given on OS-X had already passed and the wait
returned immediately without releasing the mutex to allow worker
threads to proceed.
Fix was to use the gettimeofday, which returns real time instead
of monotonic, which is what pthread_cond_timedwait wants.
rdo.c:475:25: warning: absolute value function 'abs' given an argument of type 'int64_t' (aka 'long long') but has parameter
of type 'int' which may cause truncation of value [-Wabsolute-value]
current.cost = -abs(quant_cost_in_bits) + (bits << PRECISION_INC);
^
rdo.c:475:25: note: use function 'llabs' instead
current.cost = -abs(quant_cost_in_bits) + (bits << PRECISION_INC);
cfg.c:1024:74: warning: format specifies type 'size_t' (aka 'unsigned
long') but the argument has type 'unsigned long long'
[-Wformat]
fprintf(stderr, "Too large ROI size: %llu (maximum %zu).\n", size, SIZE_MAX);
This encapsulates tiles or WPP rows into their own slices, making
it possible to send them as soon as they are done, instead of waiting
for the other substreams to finish and coding the substream offsets
in the slice header.
These fixes allow more than one slice to be used to code a picture.
- Use correct number of bits to code the slice segment address.
- Don't offset_len_minus1 for slices without substreams.
Appending to the child stream doesn't work is the child is a leaf
slice state.
Simplifies flow by removing distinction between tile and slice. Now
that slice headers are written in the parent stream, there is zero
difference between tiles and slices from bitstream point of view.
Having some of the termination bits in the LCU coding and some in the
substream finalization was needlessly confusing. Doing substream
finalization directly after LCU coding makes it easy to verify that the
finalization is done correctly.
Removes one job per WPP row from the job queue.
Removes kvz_cabac_flush, because I don't like bits being put into the
bitstream implicitly. Better to have it all in the open.
When the number of merge candidates was five, biprediction search would
read past the bounds of the priority list arrays. Fixed to limit the
search to the first four candidates.
- Checks the return value of fopen when opening the ROI file. Fixes
a segfault when the file cannot be opened.
- Check that the width and height are positive. Fixes reading past the
end of the delta QP array in kvz_set_lcu_lambda_and_qp.
- Check for overflow in width * height. Fixes an overflow resulting in
a segfault.
- Properly check that fscanf succeeds. Fixes silently accepting ROI
files that are too short.
- Properly close the FILE pointer.
The function search_pu_inter_ref incorrectly rounded the coordinates of
the block to down to a multiple 8 pixels. Small SMP and AMP blocks may
start at coordinates that are not multiples of 8. Fixed by removing the
rounding.
Fixes a failing assert when --mv-constraint is used with --smp or --amp.
Stops assuming that having cfg->gop_lowdelay set means that GOP
structure is used since it is possible that cfg->gop_lowdelay is true
but cfg->gop_len is zero. Adds checks for cfg->gop_len where needed.
Fixes a possible division by zero in kvz_encoder_feed_frame.
Drop a conditional for depth > MAX_DEPTH in search_cu. The depth cannot
be greater than MAX_DEPTH (== 3) since an earlier if-clause checks that
it is less than MAX_PU_DEPTH (== 4).
Subpixel motion estimation return 0-vector when no subpixel vector is
within the constraint. Fix is to not call subpixel motion estimation
when the integer vector is not within the constraint.
Rename and reorder everything to make more sense.
- Moved input tables into their own struct and renamed them to what
they actually represent.
- Renamed pretty much every variable to comform to our style and
to make sense.
- Removed the lastCG stuff, as the function already gets passed the
last coeff anyway. (it was named width, what the hell?)
This is to prepare for changing the code using the floating point table
to use the fixed point table instead.
This also allows reducing the size of the fractional part, which was
useful for finding every place where the the fixed point presentation
is relied upon.
Changes luma deblocking to use gather and scatter instead of reading
to and writing from here and there in memory. Should make them
faster and easier to vectorize, or at least cleaner.
Splits strong and weak luma deblocking to two functions, as they have
almost nothing in common.
Adds field lcu_stats to encoder_state_config_frame_t. The following data
is recorded for each LCU:
- number of bits
- squared cost
- used lambda value
- alpha parameter used for rate control
- beta parameter used for rate control
When rate control is enabled, enable cu_qp_delta_enabled_flag in PPS
with diff_cu_qp_delta_depth set to 0. Also adds code for writing the QP
deltas and a new cabac context.
Adds fields lambda, lambda_sqrt and qp to encoder_state_t. Drops field
cur_lambda_cost_sqrt from encoder_state_config_frame_t and renames
cur_lambda_cost to lambda.
- Defines MIN_LAMBDA and MAX_LAMBDA constants.
- Moves resetting state->frame->cur_gop_bits_coded to rate_control.c.
- Changes gop_allocate_bits to return the number of bits allocated like
pic_allocate_bits does.
When --threads=auto was given on the command line, cfg->threads was
actually set to zero, disabling threads altogether. Fixed to set
cfg->threads to -1, so that the number of threads is chosen
automatically.
The CABAC engine only writes to the bitstream when it has a full byte.
These writes are also always byte-aligned, so there is no need to even
check for stream alignment.
Speedup was around 3% with ultrafast and low QP.
Enforce bit depth promised by --input-bitdepth to avoid crashes when
larger values are provided.
Do endianess byte swap for all bytes when the buffer gets extended
to multiple of 8 pixels, and not just the number of input pixels.
Don't swap bytes on a little-endian system.
- Reduce indentation to 6 spaces
- Word wrap everything to under 80 characters
- Remove defaults from options covered by presets
- Add a dash in front of argument descriptions
- Add --(no-) to names of parameters that accept it and remove mention
of enabling or disabling
- Add executable and scripts as a dependancy to make docs
This value is not represented in the HEVC bitstream, which is why it
was not set previously. FFmpeg sets and needs it however, so make the
CLI set it as well to make sure we handle it correctly.
The rd-complexity of slow presets is better with a less agressive GOP.
Adding the GOP as part of the preset improved BDRate enough, that it
didn't make sense anymore to have a veryslow target the best BDRate.
Instead, push that responsibility to placebo by making it a little bit
faster.
GOPs with depth 1 had the same structure as those with depth 2:
g4d3t1 = 3 2 3 1
g4d2t1 = 2 2 2 1
g4d1t1 = 2 2 2 1
It now results in the correct:
g4d1t1 = 1 1 1 1
Coding inter without GOP of any kind really isn't a very sensible
default. Defaulting to B-GOP of some kind would be more better,
but lp-gop is more robust for now.
Use the vectorized general SSE41 inter SAD in AVX reg_sad for shapes
for which we don't have AVX versions yet.
Also improves speed of --smp and --amp a lot. Got a 1.25x speedup for:
--preset=ultrafast -q 27 --gop=lp-g4d3r3t1 --me-early-termination=on --rd=1 --pu-depth-inter=1-3 --smp --amp
* Suite speed_tests:
-PASS inter_sad: 0.898M x reg_sad(64x63):x86_asm_avx (1000 ticks, 1.000 sec)
+PASS inter_sad: 2.503M x reg_sad(64x63):x86_asm_avx (1000 ticks, 1.000 sec)
-PASS inter_sad: 115.054M x reg_sad(1x1):x86_asm_avx (1000 ticks, 1.000 sec)
+PASS inter_sad: 133.577M x reg_sad(1x1):x86_asm_avx (1000 ticks, 1.000 sec)
Add implementations for these functions that process the image line by
line instead of using the 16x16 function to process block by block.
The 32x32 is around 30% faster, and 64x64 is around 15% faster,
on Haswell.
PASS inter_sad: 28.744M x reg_sad(32x32):x86_asm_avx (1014 ticks, 1.014 sec)
PASS inter_sad: 7.882M x reg_sad(64x64):x86_asm_avx (1014 ticks, 1.014 sec)
to
PASS inter_sad: 37.828M x reg_sad(32x32):x86_asm_avx (1014 ticks, 1.014 sec)
PASS inter_sad: 9.081M x reg_sad(64x64):x86_asm_avx (1014 ticks, 1.014 sec)
Arrange the decision tree such that there is only 3 branches on the
most common paths and the more likely branch is always fall-through.
A profile guided optimization pass would probably do something similar.
A lot of time is being taken up by this function on ultrafast, and it
doesn't do a very good job. This change aims to both simplify the
logic and make the estimate better.
The logic is simplified by using a look up for the step mvd bit cost
step function instead of mimicking the binarization process. The
estimation is made better by checking fractional cabac bit costs.
The new function returns the same results as
kvz_get_mvd_coding_cost_cabac, but is also faster than the old
function.
