All intra coding is a special case so it can be permitted even though
Kvazaar normally only supports intra periods that are divisible by the
GOP length.
- Replaces lcu_dqp_enabled with max_qp_delta_depth in encoder_control_t.
- Fixes set_cu_qps so that it can handle quantization groups of
arbitrary size.
- Fixes computation of QP predictors so that it works for quantization
groups of arbitrary size.
Changes asserts on the reference count of objects to assert the value
after KVZ_ATOMIC_INC instead of directly checking the value. Fixes some
data races detected by TSan.
- Adds missing default values.
- Adds help for --crypto and --key.
- Adds help for --rd=3.
- Adds help for --sao options.
- Some changes to help wording.
The transform skip flag in cu_info_t was stored under the intra
substruct even though transform skip can be used for inter as well. This
caused bitstream errors. Fixed by moving the flag out of the substruct.
Adds an additional grid search step that starts from the zero motion
vector after the normal grid search. The search range for this step is
half of the normal range.
- Changes TZ grid search and star refinement to keep the origin constant
instead of moving to the best position after each iteration.
- Changes star refinement to loop until there is no more improvement,
instead of running the step only once.
When the starting point for integer motion estimation was selected among
the merge candidates, the candidate motion vectors were always rounded
down. This commit changes the rounding so that they are rounded to the
nearest integer MV instead.
Changes reference index list creation so that the negative references
are added to L1 in addition to L0 when biprediction is enabled and no
reordering of pictures is done. Biprediction can now be used with the
low-delay GOP structure.
Changes the crypto module to use unsigned char instead of byte. The byte
typedef is no longer included in the global namespace in crypto++ 6.0.0.
See https://github.com/weidai11/cryptopp/issues/442.
Fixes#184.
Checks the cost of flushing all coefficients of an inter block to zero.
This is much faster than doing full RDOQ but can still reduce bitrate
significantly. Encoding speed is increased since fewer coefficient bits
have to be coded with CABAC.
Moves duplicate code for writing the MVD of a single motion vector from
kvz_get_mvd_coding_cost_cabac and encoder_inter_prediction_unit to a new
function.
SMP/AMP search is performed using a lower work tree level than the
normal inter search so the prediction info must be copied up if an
SMP/AMP mode is chosen. Previously pixels and coefficient were copied as
well. Changed to only copy prediction info.
DST function was returned for inter luma transform blocks of size 4x4
even though they must use DCT. Fixed by checking the prediction mode of
the block in addition to whether it is chroma or luma.
When 4x4 intra blocks are enabled and inter search is limited to 16x16
and larger blocks, it is possible that inter search is accidentally done
for 4x4 blocks. Fixed by checking that block size is at least 8x8 before
doing inter search.
Overrides the linkers used for kvazaar, libkvazaar.la and kvazaar_tests.
When crypto++ is enabled, the C++ linker is used and when it is
disabled, the C linker is used.
This removes the need to explicitly specify -lstdc++ in configure when
crypto++ is used and fixes the build with crypto++ when libstd++ is not
installed.
- Fixes two errors in calculating the POC for the reference frame for
temporal candidate MV scaling.
- Fixes using the MV for the wrong direction when the temporal MV
predictor block uses bi-prediction.
Fixes#160.
Changes handling of intra pictures for --gop=8 so that every picture
with POC divisible by the intra period is intra. The first picture is
IDR and the rest of the intra pictures are CRA. POC is not reset at CRA
pictures. The leading pictures that follow the CRA picture are changed
to RASL so they are allowed to refer to pictures before the CRA picture.
Changes inter slice types to P when the L1 reference list is empty and
to B otherwise.
In all-intra, all pictures are now IDR pictures with POC zero.
When using --gop=8 with an intra period greater than one, a single POC
would be skipped before every intra frame. This commit fixes the problem
by turning the intra frames into BLA frames with leading pictures when
using --gop=8.
Changes thread queue so that only the jobs that are ready to run are
stored in the queue. Other jobs are kept track of by pointers in the
reverse dependency lists of other jobs. When a job is ready to run it is
appended to the queue. The job queue is stored as a linked list.
The definitions of threadqueue_queue_t and threadqueue_job_t are moved
to the .c file, turning them into opaque structs.
Makes thread queue code simpler. Fixes some TSan errors.
Adds struct inter_search_info_t for holding the parameters that are used
by most function related to inter search. Passing the parameters in
a single struct greatly reduces the number of parameters for many
functions.
Functions kvz_sao_reconstruct and encoder_sao_reconstruct used
frame->width as the stride instead of frame->rec->stride when accessing
frame->rec->data. This caused errors when using tiles and SAO.
Changes the work_tree parameter in search.c functions from an array to
a pointer. Fixes "formal parameter with requested alignment of 8 won't
be aligned" errors.
Changes field state->tile->frame->cu_array->data to point to the CU
array in the main encoder state. Removes the need to copy the CU array
to the main CU array after search.
Inter costs are computed using SAD except when fractional motion
estimation or bi-prediction is enabled. This commit changes
search_pu_inter_ref to recalculate the cost with SATD. Fixes inter/intra
cost comparisons since intra costs are always SATD costs.
Changes function kvz_get_coeff_cost to only copy the CABAC contexts and
not the whole encoder state.
Other threads could be simultaneously using the other parts of the
encoder state. Only copying the CABAC fixes a TSan data race warning.
Adds alignment attribute to lcu_coeff_t. The coefficients are sometimes
handled as 64-bit integers containing four coefficients so the arrays
should be aligned to 8 bytes.
Fixes a UBSan error about misaligned reads.
Changes OWF selection so that it is chosen based on the maximum number
of parallel CTUs. Number of threads is limited to prevent overhead from
extra threads.
Drop pthread_cond_broadcast on threadqueue->cond in function
kvz_threadqueue_waitfor. The broadcast caused threads to be woken up
more often than necessary.
Changes encoder_state_init_new_frame to only call normalize_lcu_weights
when the weights have been written to the array and rate control is
enabled. When rate control is disabled, the weights are not used.
Adds field max_inter_ref_lcu to encoder_control_t. It is used to set up
inter-LCU dependencies in encoder_state_encode_leaf and restrict motion
vectors in fracmv_within_tile.
When using WPP and OWF, the first CTU of a row depends on the last CTU
of the row below in the reference frame. This is necessary when SAO is
enabled since we currently do SAO for a whole CTU row at a time. When
SAO is disabled, however, it is unnecessary to wait for the whole row.
Changes CTUs to depend only on the CTU below in the reference frame
instead of the whole row when WPP and OWF are enabled and SAO disabled.
Gives a significant speedup when running on a machine with many CPU
cores.
Moves SAO reconstruction into encoder_state_worker_encode_lcu instead of
doing it in a separate step for the whole CTU row. Reconstruction of the
rightmost 10 pixels and bottommost 10 pixels of a CTU is delayed until
the neighboring CTU has been deblocked.
Doing SAO for the whole CTU row at a time caused unnecessary inter-CTU
dependencies when using WPP and OWF. The first CTU of a row would need
to wait until SAO was done for the row below in the previous frame.
Moving SAO reconstruction to immediately after deblocking each CTU fixes
this problem.
Adds width and height parameters to function kvz_sao_reconstruct and
changes it to take coordinates in units of pixels. This will be useful
for doing SAO for areas smaller than a whole CTU.
AVX2 filter functions read pixels in chunks of 8 or 16 bytes. At the end
of the block, the read goes out of the bounds of the pixels array. The
extra pixels do not affect the result.
Fixes valgrind complaining about the invalid reads by allocating 5 extra
pixels in kvz_get_extended_block_avx2
With low delay GOP structure, it is possible to use an intra period that
is not a multiple of the GOP structure length. Commit 00c9f52 changed
encoder_state_init_new_frame to reset POC on intra frames. GOP offset,
however, was not reset, resulting in invalid POCs and references for the
following frames.
This commit changes function kvz_encoder_feed_frame so that GOP offset
is correctly reset on intra frames.
When closing the encoder, the pictures stored in the input frame buffer
are freed by repeatedly calling kvz_encoder_feed_frame. If the encoder
was closed immediately after opening it, kvz_encoder_feed_frame would be
called with an unprepared encoder state. This would trigger an assert.
Fixed by changing kvz_encoder_feed_frame so that it does not require the
encoder state to be prepared.
Sets max_transform_hierarchy_depth_inter to 0 in SPS. This saves some
bits because split_transform_flag does not need to be coded for inter
blocks.
When SMP and AMP blocks are enabled the depth is set to 1 instead.
Otherwise inter split flag would default to 1 for SMP and AMP blocks,
resulting in an unnecessary transform split.
Changes kvazaar_close to stop all threads before freeing encoder states.
Fixes a crash when the encoder is closed before all pictures have been
encoded.
Changes kvazaar_close to free the remaining pictures in the the input
frame buffer. Fixes a memory leak when the encoder is closed while there
are pictures left in the buffer.
Replaces function kvz_intra_recon_lcu_luma and
kvz_intra_recon_lcu_chroma in intra.c with function kvz_intra_recon_cu.
The new function can handle reconstruction for both luma and chroma.
Removes some duplicated code.
Moves code for intra leaf transform block reconstruction from functions
kvz_intra_recon_lcu_luma and kvz_intra_recon_lcu_chroma to a new
function intra_recon_tb_leaf. Removes some duplicated code.
Changes functions encode_intra_coding_unit and encode_coding_tree to
take coordinate arguments in units of luma pixels instead of 8 px
blocks. This should make the code easier to understand.
Changes functions encode_transform_unit and encode_transform_coeff to
take coordinate arguments in units of luma pixels instead of 4 px
blocks. This should make the code easier to understand.
When kvazaar was built with crypto++ but running without using
encryption features, kvazaar attempted to delete an uninitialized crypto
handle. Fixed by setting the handle to NULL in kvz_encoder_state_init.
A CryptoPP::CFB_Mode<CryptoPP::AES>::Encryption was allocated at the
beginning of encoder_state_encode_leaf and was never freed. This commit
changes encoder_state_worker_encode_lcu to delete the CFB_Mode. Also
moves crypto handle from encoder_state_config_tile_t to encoder_state_t
so that it can be safely deleted without affecting other threads in the
same tile.
Moves the inline declaration of intra_mode_encryption before the type
and changes it to use the INLINE macro. Inline declaration after type
triggered a warning on GCC.
Fixes the order of acquiring locks for the job and its dependency in
kvz_threadqueue_job_dep_add. The dependency is locked before the job
that depends on it. This is the same order as in threadqueue_worker.
Acquiring the locks in different order in kvz_threadqueue_job_dep_add
and threadqueue_worker would sometimes result in a deadlock.
When using --me-early-termination=sensitive, early termination of inter
search used to always return the starting point if no tested motion
vector was good enough to continue the search. This commit changes
early_termination to always return the best motion vector and cost
found.
